Production and characterization of pyrolytic oils by pyrolysis of waste machinery oil

Journal of Hazardous Materials

Volumn 173, Issue 1-3, 2010, Pages 420-426

  Sinaǧ, Ali ^a   Gülbay, Selen ^a   Uskan, Burçin ^a   Uçar, Suat ^b   Özgürler, Sara Bilge ^c  

^a ANKARA UNIVERSITY   (Turkey)

^b DOKUZ EYLUL UNIVERSITY   (Turkey)

^c Çukurova Chemical Industry Corporation   (Turkey)

Author keywords

Characterization; Metals; Pyrolysis; Waste machinery oil

Indexed keywords

ALTERNATIVE METHODS; CR CONTENT; CU CONTENT; ELEMENTAL ANALYSIS; ENVIRONMENTAL PROBLEMS; ENVIRONMENTAL-FRIENDLY; EXPERIMENTAL CONDITIONS; FLAME IONIZATION DETECTORS; GAS CHROMATOGRAPHS; H-ZSM-5; HIGHER HEATING VALUE; INDUCTIVELY COUPLED PLASMA ANALYSIS; MASS SELECTIVE DETECTORS; METAL CONTENT; PYROLYTIC OIL; RANGE DISTRIBUTION; SUPPORTED ON SILICA; TUBULAR REACTORS; VANADIUM CONTENT;

BOILING POINT; CATALYSIS; CATALYSTS; CHROMATOGRAPHIC ANALYSIS; CHROMIUM; GAS CHROMATOGRAPHY; HEATING; INDUCTIVELY COUPLED PLASMA; IONIZATION OF GASES; MACHINERY; METALS; NUCLEAR MAGNETIC RESONANCE; NUCLEAR MAGNETIC RESONANCE SPECTROSCOPY; PYROLYSIS; RESONANCE; SILICA; THERMOGRAVIMETRIC ANALYSIS; VANADIUM; ZEOLITES;

GAS OILS;

ARSENIC; CADMIUM; CHROMIUM; COPPER; NICKEL; OIL; SILICON DIOXIDE; VANADIUM; ZEOLITE;

CATALYST; INDUCTIVELY COUPLED PLASMA METHOD; MACHINERY; METAL; OIL; PYROLYSIS;

ANALYTIC METHOD; ARTICLE; CATALYST; GAS; HEATING; INDUSTRIAL WASTE; MACHINE; MASS FRAGMENTOGRAPHY; PROTON NUCLEAR MAGNETIC RESONANCE; PYROLYSIS; QUANTITATIVE ANALYSIS; TUBULAR REACTOR;

CALIBRATION; CATALYSIS; COKE; ELEMENTS; FLAME IONIZATION; GAS CHROMATOGRAPHY-MASS SPECTROMETRY; GASES; HYDROCARBONS, AROMATIC; INDUSTRIAL OILS; INDUSTRIAL WASTE; KEROSENE; MAGNETIC RESONANCE SPECTROSCOPY; METALS; SOLVENTS; TEMPERATURE; ZEOLITES;

EID: 71749099558     PISSN: 03043894     EISSN: None     Source Type: Journal    
DOI: 10.1016/j.jhazmat.2009.08.100     Document Type: Article

References (35)

1. Portela J.R., López J., Nebot E., and Martínez de la Ossa E. Elimination of cutting oil wastes by promoted hydrothermal oxidation. J. Hazard. Mater. 88 (2001) 95-106
2. Nerin C., Domeno C., Moliner R., Lazaro M.J., Suelves I., and Valderrama J. Behaviour of different industrial waste oils in a pyrolysis process: metals distribution and valuable products. J. Anal. Appl. Pyrol. 55 (2000) 171-183
3. Islam M.R., Haniu H., and Beg M.R.A. Liquid fuels and chemicals from pyrolysis of motorcycle tire waste: product yields, compositions and related properties. Fuel 87 (2008) 3112-3122
4. Pütün A.E., Uzun B.B., Apaydin E., and Pütün E. Bio-oil from olive oil industry wastes: pyrolysis of olive residue under different conditions. Fuel Process. Technol. 87 (2005) 25-32
5. Balat M. Diesel-like fuel obtained by catalytic pyrolysis of waste engine oil. Ener. Explor. Exploit. 26 (2008) 197-208
6. Chum H.L., and Overend R.P. Biomass and renewable fuels. Fuel Process. Technol. 71 (2001) 187-195
7. Encinar J.M., González J.F., Martínez G., and Román S. Catalytic pyrolysis of exhausted olive oil waste. J. Anal. Appl. Pyrol. 85 (2009) 197-203
8. Jiao Z., Jin Y.Q., Chi Y., Wen J.M., Jiang X.G., and Jiang N.M. Pyrolysis characteristics of organic components of municipal solid waste at high heating rates. Waste Manage. 29 (2009) 1089-1094
9. Sánchez M.E., Cuetos M.J., Martínez O., and Morán A. Pilot scale thermolysis of municipal solid waste: combustibility of the products of the process and gas cleaning treatment of the combustion gases. J. Anal. Appl. Pyrol. 78 (2007) 125-132
10. Guan .J., Shun L.Y., and Xi L.M. Product characterization of waste printed circuit board by pyrolysis. J. Anal. Appl. Pyrol. 83 (2008) 185-189
11. Williams P.T., and Besler S. Pyrolysis-thermogravimetric analysis of tyres and tyre components. Fuel 74 (1995) 1277-1283
12. Teng H., Serio M.A., Wojtowicz M.A., Bassilakis R., and Solomon P.R. Reprocessing of used tires into activated carbon and other products. Ind. Eng. Chem. Res. 34 (1995) 3102-3111
13. Conesa J.A., Font R., Marcilla A., and Garcia A.N. Pyrolysis of polyethylene in a fluidized bed reactor. Energy Fuels 8 (1994) 1238-1246
14. Ng S.H., Seoud H., Stanciulescu M., and Sugimoto Y. Conversion of polyethylene to transportation fuels through pyrolysis and catalytic cracking. Energy Fuels 9 (1995) 735-742
15. Chenoweth K., van Duin A.C.T., Dasgupta S., and Goddard W.A. Initiation mechanisms and kinetics of pyrolysis and combustion of JP-10 hydrocarbon jet fuel source. J. Phys. Chem. A 9 (2009) 1740-1746
16. Domeno C., and Nerin C. Fate of polyaromatic hydrocarbons in the pyrolysis of industrial waste oils. J. Anal. Appl. Pyrol. 67 (2003) 237-246
17. Karayildirim T., Yanik J., Yuksel M., and Bockhorn H. Characterisation of products from pyrolysis of waste sludges. Fuel 85 (2006) 1498-1508
18. Demiral I., and Sensöz S. The effects of different catalysts on the pyrolysis of industrial wastes (olive and hazelnut bagasse). Bioresour. Technol. 99 (2008) 8002-8007
19. Myers M.E., Stollstelmer J., and Wims A.M. Determination of hydrocarbon-type distribution and hydrogen/carbon ratio of gasolines by nuclear magnetic resonance spectrometry. Anal. Chem. 47 (1975) 2010-2015
20. Joo H.S., and Guin J.A. Continuous upgrading of a plastics pyrolysis liquid to an enviromentally favorable gasoline range product. Fuel Process. Technol. 57 (1998) 25-40
21. Standard test method for determination of additive elements, wear metals, and contaminants in used lubricating oils and determination of selected elements in base oils by Inductively Coupled Plasma Atomic Emission Spectrometry (ICP-AES) ASTM D5185, 2009.
22. Standard test method for boiling range distribution of petroleum fractions by gas chromatography ASTM D2887, 2008.
23. Standard test method for heat of combustion of liquid hydrocarbon fuels by bomb calorimeter ASTM D240-02, 2007.
24. Ermakova M.A., and Ermakov D.Y. High-loaded nickel-silica catalysts for hydrogenation, prepared by sol-gel: route: structure and catalytic behavior. Appl. Catal. A: Gen. 245 (2003) 277-288
25. Katikaneni S.P.R., Adjaye J.D., and Bakhshi N.N. Catalytic conversion of canola oil to fuels and chemicals over various cracking catalysts. Can. J. Chem. Eng. 73 (1995) 484-497
26. Raphael O.I., Katikaneni S.P.R., and Bakhshi N.N. Catalytic conversion of canola oil to fuels and chemicals: roles of catalyst acidity, basicity and shape selectivity on product distribution. Fuel Process. Technol. 51 (1997) 101-125
27. Adjaye J.D., Katikaneni S.P.R., and Bakhshi N.N. Catalytic conversion of a biofuel to hydrocarbons: effect of mixtures of HZSM-5 and silica-alumina catalysts on product distribution. Fuel Process. Technol. 48 (1996) 115-143
28. Zhang T., and Amiridis M.D. Hydrogen production via the direct cracking of methane over silica-supported nickel catalysts. Appl. Catal. A 167 (1998) 161-172
29. Giannopoulos D., Kolaitis D.I., Togkalidou A., Skevis G., and Founti M.A. Quantification of emissions from the co-incineration of cutting oil emulsions in cement plants. Part II. Trace species. Fuel 86 (2007) 2491-2501
30. Wey M.Y., Hwang J.H., and Chen J.C. Mass and elemental size distribution of chromium, lead and cadmium under various incineration conditions. J. Chem. Eng. Jpn. 31 (1998) 506-517
31. Lide D.R. Handbook of Chemistry and Physics (1992), CRC Press
32. Lázaro M.J., Moliner R., Suelves I., Nerín C., and Domeño C. Valuable products from mineral waste oils containing heavy metals. Environ. Sci. Technol. 34 (2000) 3205-3210
33. Contreras M.L., Arosteguia J.M., and Armestoa L. Arsenic interactions during co-combustion processes based on thermodynamic equilibrium calculations. Fuel 88 (2009) 539-546
34. K. Lundholm, Fate of Cu, Cr, As and Some Other Trace Elements During Combustion of Recovered Waste Fuels, Doctoral Thesis, Department of Applied Physics and Electronics Umeå, University Umeå, Sweden, 2007.
35. Lorenza A., Berry F.J., Carbucicchio M., Marco J.F., Mortimera M., and Vetela F.F. X-Ray absorption and photoelectron spectroscopic investigation of vanadium interaction with NH41- and Eu31-exchanged zeolite-Y following calcination and steam treatment. J. Mater. Chem. 12 (2002) 3034-3038