Numerical and experimental investigation for stability lobes prediction in thin wall machining

Engineering Letters

Volumn 17, Issue 4, 2009, Pages

  Adetoro, O B ^a   Wen, P H ^a   Sim, W M ^b   Vepa, R ^a  

^a QUEEN MARY UNIVERSITY OF LONDON   (United Kingdom)

^b NONE   (United Kingdom)

Author keywords

Discrete fourier transform; FEA; Frequency response function; Stability lobes; Transfer function

Indexed keywords

EID: 71649107854     PISSN: 1816093X     EISSN: 18160948     Source Type: Journal    
DOI: None     Document Type: Article

References (36)

1. F. W. Taylor, On the art of cutting metals, Transactions of the American Society of Mechanical Engineers, 28, (1907), pp. 31-350.
2. S. A. Tobias and W. Fishwick, A Theory of Regenerative Chatter, The Engineer London, (1958).
3. J. Tlusty, M. Polacek, The stability of machine tools against self excited vibrations in machining, in: Proceedings of the ASME International Research in Production Engineering, Pittsburgh, USA, (1963), pp. 465-474.
4. F. Koenigsberger and J. Tlusty, Machine Tool Structures Stability Against Chatter, Pergamon Press, 1, (1967).
5. H. E. Merritt, Theory of Self-Excited Machine Tool Chatter, Journal of Engineering for Industry, Transactions of the ASME, 87, (1965), pp.447-454.
6. J. Tlusty and P. Ismail, Basic Nonlinearity in Machining Chatter, Annals of the CIRP, 10 (1), (1981).
7. J. Tlusty and P. Ismail, Special Aspects of Chatter in Milling, Journal of Vibration, Acoustics, Stress, and Reliability in Design, 105, (1983).
8. J. Slavicek, The Effect of Irregular Tooth Pitch on Stability of Milling, 6th MTDR Conference Manchester, (1965).
9. P. Vanherck, Increasing Milling Machine Productivity by Use of Cutters with Non-Constant Cutting - Edge Pitch, 8th MTDR Conference Manchester, (1967).
10. R Sridhar, R. E. Hohn and G. W. Long, General Formulation of the Milling Process Equation, Journal of Engineering for Industry, Transactions of the ASME, (1968), pp. 317-324.
11. R. Sridhar, R.E. Hohn, and G.W. Long. A Stability Algorithm for the General Milling Process, Journal of Engineering for Industry, Transactions of the ASME, (1968), pp. 330-334.
12. R.E. Hohn, R. Sridhar, and G.W. Long. A Stability Algorithm for a Special Case of the Milling Process, Journal of Engineering for Industry, Transactions of the ASME, (1968), pp. 325-329.
13. H. Opitz, Chatter Behaviour of Heavy Machine Tools, Quarterly Technical Report No. 2 AF 61 (052)-916 Research and Technology Division Wright Patterson Air Force Base OH. (1968).
14. H. Opitz and F. Bernardi, Investigation and Calculation of the Chatter Behaviour of Lathes and Milling Machines, Annals of the CIRP, 18, (1970), pp. 335-343.
15. J. Tlusty and F. Koenigsberger, Machine Tool Structures, Pergamon Press Oxford 5th Edn., 1, (1970).
16. I. Minis, T. Yanushevsky, R. Tembo and R. Hocken, Analysis of Linear and Nonlinear Chatter in Milling, Annals of the CIRP, 39, (1990), pp. 459-462.
17. I. Minis and T. Yanushevsky, A New Theoretical Approach for the Prediction of Machine Tool Chatter in Milling, Journal of Engineering for Industry, Transactions of the ASME, 115, (1993), pp. 1-8.
18. A. C. Lee and C. S. Liu, Analysis of Chatter Vibration in the End Milling Process, International Journal of Machine Tool Design and Research, 31(4), (1991), pp. 471-479.
19. A. C. Lee, C. S. Liu and S. T. Chiang, Analysis of Chatter Vibration in a Cutter - Workpiece System, International Journal of Machine Tool Design and Research, 31(2), (1991), pp. 221-234.
20. E. Budak, Mechanics and dynamics of milling thin walled structures. Ph.D. Thesis, The University of British Columbia, Vancouver, B.C., Canada, (1994).
21. Y. Altintas and E. Budak, Analytical prediction of stability lobes in milling, CIRP Annals - Manufacturing Technology, 44(1), (1995), pp. 357-362.
22. E. Budak and Y. Altintas, Analytical prediction of chatter stability in milling - Part I: General formulation, Proceeding of ASME 1995 International Mechanical Engineering Conference and Exposition, San Francisco, USA, (1995).
23. E. Budak, Analytical Prediction of Chatter Stability in Milling - Part I: General Formulation, Journal of Dynamic Systems, Measurement and Control, Transactions of the ASME, 120, (1998), pp. 22-30.
24. Y. Altintas, E. Shamoto, P. Lee and E. Budak, Analytical Prediction of Stability Lobes in Ball-End-Milling, Journal of Manufacturing Science and Engineering Transactions of the ASME, 121(4), (1999), pp. 586-592.
25. Y. Altintas, Analytical prediction of three dimensional chatter stability in milling, JSME International Journal, Series C: Mechanical Systems, Machine Elements and Manufacturing, 44(3), (2001), pp. 717-723.
26. F. J. Campa, L. N. Lopez de Lacalle, A. Lamikiz and J. A. Sanchez, Selection of cutting conditions for a stable milling of flexible parts with bull-nose end mills, Journal of Materials Processing Technology, 191(1-3), (2007), pp. 279-282.
27. O. B. Adetoro, W. M. Sim, and P. H. Wen, Stability Lobes Prediction for Corner Radius End Mill using Nonlinear Cutting Force Coefficients, Machining Science and Technology (submitted for publication - August 2009).
28. V. Thevenot, L. Arnaud, G. Dessein and G. Cazenave-Larroche, Influence of Material Removal on the Dynamics Behavior of Thin-walled Structures in Peripheral Milling. Machining Science and Technology, 10, (2006), pp. 275-287.
29. S. Seguy, F. J. Campa, L. N. Lopez de Lacalle, Toolpath dependent stability lobes for the milling of thin-walled parts, International Journal of Machining and Machinability of Materials, 4(4), (2008), pp. 377-392.
30. O. B. Adetoro, W. M. Sim, and P. H. Wen, Accurate Prediction of Stability Lobes using Nonlinear Thin Wall Dynamics, Journal of Material Processing Technology, (submitted for publication - August 2009).
31. R. G. Grimes, J. G. Lewis and H. D. Simon, A Shifted Block Lanczos Algorithm for Solving Sparse Symmetric Generalized Eigenproblems, SIAM Journal on Matrix Analysis and Applications, 15, (1994), pp. 228-272.
32. Karlsson & Sorensen, Inc. Hibbitt, Abaqus Theory Manual, 1080 Main Street Pawtucket Rl 02860-4847 USA, (2006).
33. S. W. Smith, The Scientit & Engineer's Guide to Digital Signal Processing, California Technical Pub. San Diego, 1st edition, (1997). Available: http://www.dspguide.com.
34. Y. Altintas, Manufacturing Automation, Cambridge University Press, New York, NY (2000).
35. O. B. Adetoro, W. M. Sim, P. H. Wen, R. Vepa, Prediction of Proportional Damping Parameters, Journal of Advanced Manufacturing Systems, (submitted for publication - April 2009).
36. O. B. Adetoro, W. M. Sim, P. H. Wen, A New Damping Modelling Approach and its Application in Thin Wall Machining, The International Journal of Advanced Manufacturing Technology (submitted publication - May 2009).