A critical review of two-phase gas-liquid industrial spray systems

International Review of Mechanical Engineering

Volumn 3, Issue 1, 2009, Pages 110-125

  Rahman, M A ^a   Heidrick, T ^a   Fleck, B A ^a  

^a NONE

Author keywords

Advanced measurement techniques; Atomization; Particle dynamic analyzer; Spray; Two phase flow

Indexed keywords

EID: 71549160052     PISSN: 19708734     EISSN: 25325655     Source Type: Journal    
DOI: None     Document Type: Article

References (58)

1. Tafreshi, Z. M., Kirpalani, D., Bennett, A., and McCracken, T. W., Improving the efficiency of fluid cokers by altering two-phase feed characteristics, Powder Technology 125, pp.234-241, 2002.
2. MacGregor, S. A., Air Entrainment in Spray Jets, Int. J. Heat and Fluid Flow 12, pp.279-283, 1991.
3. Ariyapadi, S., Balachandar, R., and Berruti, F., Effect of Cross-Flow on the Spray Characteristics of an Industrial Feed Nozzle, paper 75b Proc. AIChE Spring Annual meeting, Atlanta, GA, 2000,
4. Ariyapadi, S., Balachandar, R., and Berruti, F., Spray Characteristics of Two-phase Feed Nozzles, The Canadian Journal of Chemical Engineering, 81, pp.923-939, October 2003.
5. Balachandar, R., Mulpuru, S. R., and Ungurian, M. H., A Note on Particle Size Measurements in Two-Phase Flows, Journal of Fluids Engineering, Trans. ASME 120, pp.390-397, 1998.
6. Hestroni, G., and Sokolov, M., Distribution of Mass, Velocity and Intensity of Turbulence in a Two-phase Turbulent Jet, ASME Journal of Applied Mechanics 38, pp.315-327, 1971.
7. McDonell, V. G., and Samuelsen, G. S. (1996). Intra- and interlaboratory experiments to assess performance of phase Doppler interferometry. 57.
8. Widmann, J. F., Presser, C., and Leigh, S. D., Improving phase Doppler volume flux measurements in low data rate applications, Meas. Sci. Technol., 12 pp.1180-1190, 2001
9. Zhu, J. Y., Rudoff, R. C., Bachalo, E. J., and Bachalo, W. D., Number density and mass flux measurements using the phase Doppler particle analyser in reacting and non-reacting swirling flows, AIAA 31st Aerospace Sciences Meeting Exhibit. (Reno, NV) paper AIAA-93-0361, 1993.
10. Copan, J., Balachandar, R., and Berruti, F., Droplet Size-Velocity Characteristics of Sprays Generated by Two-Phase Feed Nozzles, Chem. Engg. Comm., 184 pp.105-124, 2001.
11. Crowe, C. T., Multiphase flow handbook, CRC: Taylor & Francis, Boca Raton, FL 2006.
12. Buckner, H. N., and Sojka, P. E., Effervescent atomization of high-viscosity fluids, Part I: Newtonian liquids, Atomizations and Sprays, 1, pp.239-252, 1991.
13. Chen, S. K., and Lefebvre, A. H., Discharge coefficients for plain-orifice effervescent atomizers, Atomizations and Sprays, 4, pp.275-290, 1994.
14. Chin, J. S., and Lefebvre, A. H., Flow patterns in internal-mixing, twin-fluid atomizers, Atomizations and Sprays, 3, pp.463-475, 1993.
15. Kim, J. Y., and Lee, S. Y., Dependence of spraying performance on the internal flow pattern in effervescent atomizers, Atomizations and Sprays, 11, pp.735-756, 2001.
16. Lörcher, M., Schmidt, F., and Mewes, D., Flow field and phase distribution inside effervescent atomizers, CD-ROM, Proceedings of the 9th International Conference on Liquid Atomization and Spray System, ICLASS 2003, Sorrento, Italy, 2003.
17. Lund, M. T., Sojka, P. E., Lefebvre, A. H., and Gosselin, P. G., Effervescent atomization at low mass flow rates, Part 1: the influence of surface tension Atomization Spray, 3, pp.77-89, 1993.
18. Luong, J. T. K., and Sojka, P. E., Unsteadiness in effervescent sprays, Atomization Spray, 9, pp.87-109, 1999.
19. Oshinowo, T., and Charles, M. E., Vertical two-phase flow, Part 1: flow pattern correlations, Can. J. Chem. Eng., 52, pp.25-35, 1974.
20. Richter, H. J., Separated two-phase flow model, application to critical two-phase flow, Int. J. Multiphase Flow, 9, pp.511-530, 1983.
21. Whitlow, J. D., and Lefebvre, A. H., Effervescent atomizer operation and spray characteristics, Atomizations and Sprays, 3, pp.137-155, 1993.
22. Nasr, G. G., Yule, A. J., and Bendig, L., Industrial sprays and atomization: design, analysis and applications, Springer London; New York 2002.
23. Lefebvre, A. H., Atomizations and Sprays, Hemisphere, New York.1989.
24. Mugele, R., and Evans, H. D., Drop size distributions is sprays, Ind. Eng. Chem., 43(6), pp.1317-1324, 1951.
25. Sakai, T., Kito, M., Saito, M., and Kanbe, T., Characteristics of Internal mixing Twin-Fluid Atomizer, Proceedings of the 1st international conference on liquid atomization and sprays, Tokyo, pp. 1783-1785., 1978.
26. Ejim, C. E., Fleck, B. A., and Amirfazli, A., A Scaling Study of the Atomization of a Two-Phase Industrial Nozzle: Part 1 - Effect of Surface Tension and Viscosity on Mean Drop Size Profiles, Proceedings of the 20th ILASS - Europe Meeting, Sept. 5-7, Orléans, France., 2005.
27. Farago, Z., and Chigier, N., Morphological classification of disintegration of round liquid jets in a coaxial air stream, Atomization and Sprays, 2, pp.137-153, 1992.
28. Grant, R. P., and Middleman, S., Newtonian jet stability, AIChE J., 12, pp.669-678, 1966.
29. Levich, V. G., Physicochemical Hydrodynamics, Prentice Hall, NJ.1962.
30. Dombrowski, N., and Johns, W. R., The aerodynamic instability and disintegration of viscous liquid sheets, Chem. Eng. Sci., 18, pp.203-214, 1963.
31. Low, T. B., and List, R., Collision, coalescence and breakup of raindrops, J. Atmos. Sci., 39, pp.1591-1618, 1982.
32. Faeth, G. M., Structure and atomization properties of dense turbulent sprays, 23rd Symposium on Combustion, The Combustion Institute, Pittsburgh, 1990, pp. 1345-1352.
33. Hsiang, L. P., and Faeth, G. M., Near-limit drop deformation and secondary breakup, Int. J. Multiphase Flow, 18, pp.635-652, 1992.
34. Pilch, M., and Erdmann, C. A., Use of breakup time data and velocity history data to predict the maximum size of stable fragments for acceleration-induced breakup of a liquid drop, Int. J. Multiphase Flow, 13, pp.741-757, 1987.
35. Anderson, W. H., and Wolfe, H. E., Aerodynamic breakup of liquid drops-I. Theoretical, Proceedings of the International Shock Tube Symposium, Naval Ordinance Laboratory, White Oak, Maryland, USA, pp.1445-1152., 1965.
36. Yule, A. J., and Dunkley, J. J., Atomization of Melts, Clarendon Press, Oxford. 1994.
37. Qiu, H. H., and Sommerfeld, M., A reliable method for determining the measurement volume size and particle mass fluxes using phase-Doppler anemometry, Experiments in Fluids 13, pp.393-404, 1992.
38. Saffman, M., Automatic calibration of LDA measurement volume size, A. Appl. Opt., 26, pp.2592-2597, 1987.
39. Qiu, H. H., Sommerfeld, M., and Durst, E., High resolution data processing for phase-Doppler measurements in a complex two-phase flow, Meas. Sci. Tech., 2, pp.455-463, 1991.
40. Juo, K. K., Progress in Astronautics and Aeronautics, vol 166, Recent advances in spray Combustion: Spray Atomization and Drop Burning Phenomena, vol 1, American Institute of Aeronautics and Astronautics, Inc., Reston, Virginia.1995.
41. Dullenkopf, K., Willmann, M., Wittig, S., Schone, F., Stieglmeier, M., Tropea, C., and Mundo, C., Comparative Mass Flux Measurements in Sprays using a Patternator and the Phase-Doppler Technique, Part. Part. Syst. Charact., 15 pp. 81-89, 1998.
42. Sommerfeld, M., and Qiu, H. H., Particle concentration measurements by phase-doppler anemometry in complex dispersed two-phase flows, Experiments in Fluids 18 pp.187-198, 1995.
43. Ariyapadi, S., Balachandar, R., and Berruti, F., Characterizing Spray Pulsations Using a Phase-Doppler Particle Analyzer, Ind. Eng. Chem. Res., 40, pp.5282-5290, 2001.
44. Ariyapadi, S. V., A study on droplet-laden jets, Master's thesis, Department of Chemical Engineering, University of Saskatchewan, Saskatoon, SK, Canada, 2000.
45. Ariyapadi, S., Berruti, F., and Ram, B., Effect of Crossflow on the Spray Characteristics of an industrial Feed Nozzle, Chem. Eng. Comm., 190: 1, pp.681-1704, 2003.
46. Kashdan, J. T., Shrimpton, J. S., and Whybrew, A., Two-Phase Flow Characterization by Automated Digital Image Analysis. Part 1: Fundamental Principles and Calibration of the Technique, Part. Part. Syst. Charact., 20 2003.
47. Hofeldt, D. L., and Hanson, R. K., Instantaneous imaging of particle size and spatial distribution in two-phase flows, Applied Optics, 30(33), pp.4936-4948, 1991.
48. Kawaguchi, T., Akasaka, Y., and Maeda, M., Size measurements of droplets and bubbles by advanced interferometric laser imaging technique, Meas. Sci. Technol., 13, pp.308-316, 2002.
49. Zama, Y., Kawahashi, M., and Hirahara, H., Simultaneous Measurement of Droplet Size and Three-Components of Velocity in Spray, Optical Review 11(6), pp.358-364, 2004.
50. Ariyapadi, S., Berruti, F., Briens, C., Knapper, B., Skwarok, R., and Chan, E., Stability of horizontal gas-liquid sprays in open-air and in a gas-solid fluidized bed, Powder Technology 155 pp.161-174, 2005.
51. Kumar, S., Nikitopoulos, D. N., and Michaelides, E. E., Effect of bubbles on the turbulence near the exit of a liquid jet, Experiments in Fluids 7, pp.487-494, 1989.
52. Crowe, C. T., Advanced Experimental Techniques, Multiphase flow handbook, CRC: Taylor & Francis, Boca Raton, FL.2006.
53. Kies, F. K., Benadda, B., and Otterbein, M., Experimental study on mass transfer of a co-current gas-liquid contactor performing under high gas velocities, Chemical Engineering and Processing 43 pp.1389-1395, 2004.
54. Darby, R., Evaluation of Two-Phase Flow Models for Flashing Flow In Nozzles, Process Safety Progress, 19(1), pp.32-39, 2000.
55. Cleary, V., Bowena, P., and Witlox, H., Flashing liquid jets and two-phase droplet dispersion I. Experiments for derivation of droplet atomization correlations, Journal of Hazardous Materials 142 pp.786-796, 2007.
56. Sovania, S. D., Choua, E., Sojkaa, P. E., Gorea, J. P., Eckerleb, W. A., and Crofts, J. D., High pressure effervescent atomization: effect of ambient pressure on spray cone angle, Fuel 80, pp.427-435, 2001.
57. Kennedy, I. M., and Moody, M. H., Particle dispersion in a turbulent round jet, Experimental Thermal and Fluid Science, 18 pp.11-26, 1998.
58. Ziesenis, J., and Bauckhage, K., Absorption and Scattering of Light by Highly Concentrated Two-phase Flows, Part. Part. Syst. Charact., 19 pp.195-202, 2002.