A tensile split hopkinson bar for testing particulate polymer composites under elevated rates of loading

Experimental Mechanics

Volumn 49, Issue 6, 2009, Pages 799-811

  Owens, A T ^a,b   Tippur, H V ^a  

^a AUBURN UNIVERSITY   (United States)

^b US Army AMRDEC Development   (United States)

Author keywords

High strain rate failure; Microstructural effects; Particulate composites; Split Hopkinson bar; Tensile stress strain response

Indexed keywords

BENCHMARK EXPERIMENTS; BRITTLE MATERIALS; CONSTANT VOLUMES; EXPERIMENTAL SETUP; FAILURE STRESS; FILLER PARTICLES; FILLER VOLUME FRACTION; HIGH RATE; HIGH STRAIN RATES; LOADING RATE; MICROMECHANICAL MODEL; MICROSTRUCTURAL EFFECT; PARTICULATE COMPOSITES; PARTICULATE POLYMER COMPOSITES; QUASI-STATIC; QUASI-STATIC LOADING; SPECIFIC ENERGY; SPECIMEN PREPARATION METHOD; SPLIT HOPKINSON BAR; TENSILE RESPONSE; ULTIMATE STRESS;

BARS (METAL); FILLERS; SPECIMEN PREPARATION; STRESS ANALYSIS; TENSILE STRESS; TENSILE TESTING; TITRATION;

STRAIN RATE;

EID: 71449115969     PISSN: 00144851     EISSN: 17412765     Source Type: Journal    
DOI: 10.1007/s11340-008-9192-7     Document Type: Article

References (24)

1. O Ishai LJ Cohen 1967 Elastic properties of filled and porous epoxy composites Int J Mech Sci 9 539 546 10.1016/0020-7403(67)90053-7 doi:10.1016/0020-7403(67)90053-7
2. O Ishai LJ Cohen 1968 Effect of fillers and voids on compressive yield of epoxy composites J Compos Mater 2 302 315 10.1177/002199836800200303 doi:10.1177/002199836800200303
3. J Spanoudakis RJ Young 1984 Crack propagation in a glass particle-filled epoxy resin. Part 1. Effect of particle volume fraction and size J Mater Sci 19 473 486 10.1007/BF02403234 doi:10.1007/BF02403234 (Pubitemid 14528388)
4. Y Nakamura M Yamaguchi 1992 Effects of particle size on the fracture toughness of epoxy resin filled spherical silica Polymer 33 16 3415 3426 10.1016/0032-3861(92)91099-N doi:10.1016/0032-3861(92)91099-N
5. R Kitey HV Tippur 2005 Dynamic crack growth in particulate bimaterials having discrete and diffuse interfaces: role of microstructure Eng Fract Mech 72 2721 2743 10.1016/j.engfracmech.2005.07.006 doi:10.1016/j.engfracmech.2005.07. 006 (Pubitemid 41372543)
6. W Chen F Lu M Cheng 2002 Tension and compression tests of two polymers under quasistatic and dynamic loading Polym Test 21 113 121 10.1016/S0142- 9418(01)00055-1 doi:10.1016/S0142-9418(01)00055-1 (Pubitemid 33125935)
7. B Song W Chen T Yanagita DJ Frew 2005 Temperature effects on dynamic compressive behavior of an epoxy syntactic foam Compos Struct 67 289 298 10.1016/j.compstruct.2004.07.012 doi:10.1016/j.compstruct.2004.07.012 (Pubitemid 40014393)
8. B Song W Chen T Yanagita DJ Frew 2005 Confinement effects on the dynamic compressive properties of an epoxy syntactic foam Compos Struct 67 279 287 10.1016/j.compstruct.2004.07.011 doi:10.1016/j.compstruct.2004.07.011 (Pubitemid 40014392)
9. Gray GT III, Blumenthal WR, Trujillo CP, Carpenter RW II (1997) Influence of temperature and strain rate on the mechanical behavior of Adiprene L-100. J Phys IV France 07:C3-523-C3-528.
10. B Hopkinson 1914 A method of measuring the pressure produced in the detonation of high explosives or by the impact of bullets Philos Trans R Soc Lond, A Contain Pap Math Phys Character 213 437 456 doi:10.1098/rsta.1914.0010
11. H Kolsky 1949 An investigation of the mechanical properties of materials at very high rates of strain Proc Phys Soc B 62 676 700 10.1088/0370-1301/62/11/ 302 doi:10.1088/0370-1301/62/11/302
12. US Lindholm LM Yeakley 1968 High strain-rate testing: tension and compression Exp Mech 8 1 9 10.1007/BF02326244 doi:10.1007/BF02326244
13. T Nicholas 1981 Tensile testing of materials at high rates of strain Exp Mech 21 177 185 10.1007/BF02326644 doi:10.1007/BF02326644
14. GH Staab A Gilat 1991 A direct-tension split Hopkinson bar for high strain-rate testing Exp Mech 31 232 235 10.1007/BF02326065 doi:10.1007/ BF02326065
15. K Ogawa 1984 Impact-tension compression test by using a split-Hopkinson bar Exp Mech 24 81 85 10.1007/BF02324987 775980 doi:10.1007/BF02324987
16. H Huh WJ Kang SS Han 2002 A tension split Hopkinson bar for investigating the dynamic behavior of sheet metals Exp Mech 42 8 17 10.1007/BF02411046 doi:10.1007/BF02411046
17. D Mohr G Gary 2007 M-Shaped specimen for the high-strain rate tensile testing using a split Hopkinson pressure bar apparatus Exp Mech 47 681 692 10.1007/s11340-007-9035-y doi:10.1007/s11340-007-9035-y (Pubitemid 47470716)
18. Owens AT (2007) Development of a tensile split Hopkinson bar for testing stress-strain response of particulate composites under high rates of loading. M.S. Thesis, Auburn University
19. Gray GT (2000) Classic split Hopkinson bar testing. ASM mechanical testing and evaluation handbook. ASM, Pennsylvania, 8:pp 488-496.
20. JC Smith 1976 The elastic constants of a particulate-filled glassy polymer: comparison of experimental values with theoretical predictions Polym Eng Sci 16 394 399 0345.65009 10.1002/pen.760160603 doi:10.1002/pen.760160603
21. GJ Weng 1984 Some elastic properties of reinforced solids, with special reference to isotropic ones containing spherical inclusions Int J Eng Sci 22 7 845 856 0556.73074 10.1016/0020-7225(84)90033-8 doi:10.1016/0020-7225(84)90033-8 (Pubitemid 15427987)
22. MR Piggott J Leidner 1974 Misconceptions about filled polymers J Appl Polym Sci 18 1619 1623 10.1002/app.1974.070180604 doi:10.1002/app.1974.070180604
23. L Nicolais R Mashalkar 1976 The strength of polymeric composites containing spherical fillers J Appl Polym Sci 20 561 563 10.1002/app.1976. 070200226 doi:10.1002/app.1976.070200226
24. M Schrager 1978 The effect of spherical inclusions on the ultimate strength of polymer composites J Appl Polym Sci 22 2379 2381 10.1002/app.1978.070220826 doi:10.1002/app.1978.070220826