Mixed Mode Cracking in Layered Materials

Advances in Applied Mechanics

Volumn 29, Issue C, 1991, Pages 63-191

  Hutchinson, J W ^a   Suo, Z ^b  

^a HARVARD UNIVERSITY   (United States)

^b UNIVERSITY OF CALIFORNIA   (United States)

Author keywords

[No Author keywords available]

Indexed keywords

EID: 71149121504     PISSN: 00652156     EISSN: None     Source Type: Book Series    
DOI: 10.1016/S0065-2156(08)70164-9     Document Type: Article

References (102)

1. Akisanya, A.R., Fleck, N.A., Analysis of a wavy crack in sandwich specimens. Int. J. Fracture., 1990 To be published.
2. Anderson, G.P., DeVries, K.L., Williams, M.L., Mixed mode stress field effect in adhesive fracture. Int. J. Fracture 10 (1974), 565–583.
3. Argon, A.S., Gupta, V., Landis, H.S., Cornie, J.A., Intrinsic toughness of interfaces between SiC coatings and substrates of Si or C fibers. J. Mater. Sci. 24 (1989), 1406–1412.
4. Atkinson, C., Smelser, R.E., Sanchez, J., Combined mode fracture via the cracked Brazilian disk test. Int. J. Fracture. 18 (1982), 279–291.
5. Bao, G., Ho, S., Fan, B., Suo, Z., The role of material orthotropy in fracture specimens for composites. Int. J. Solids Structures, 1990 (in press).
6. Beuth, J., Cracking of thin bonded films in residual tension., 1990 To be published.
7. J. Beuth 1991 Ph.D. thesis research in progress, Harvard University.
8. Cannon, R.M., Fisher, R., Evans, A.G., Decohesion of thin films from ceramics. Proc. Symp. on Thin Films—Interfaces and Phenomena, Boston, Mass. Mater. Res. Soc. 1986, 1986, 799–804.
9. Cao, H.C., Evans, A.G., An experimental study of the fracture resistance of bimaterial interface. Mechanics of Materials 7 (1989), 295–305.
10. Chai, H., A note on crack trajectory in an elastic strip bounded by rigid substrates. Int. J. Fracture 32 (1987), 211–213.
11. Chai, H., Shear fracture. Int. J. Fracture 37 (1988), 137–159.
12. Chai, H., Three-dimensional fracture analysis of thin film debonding. Int. J. Fracture. 46 (1990), 237–256.
13. Chai, H., Babcock, C.D., Knauss, W.G., One dimensional modelling of failure in laminated plates by delamination buckling. Int. J. Solids Structures 17 (1981), 1069–1083.
14. Charalambides, P.G., Cao, H.C., Lund, J., Evans, A.G., Development of test method for measuring the mixed mode fracture resistance of bimaterial interfaces. Mechanics of Materials 8 (1990), 269–283.
15. Charalambides, P.G., Lund, J., Evans, A.G., McMeeking, R.M., A test specimen for determining the fracture resistance of bimaterial interfaces. J. Appl. Mech. 56 (1989), 77–82.
16. Cherepanov, G.P., The stress state in a heterogeneous plate with slits (in Russian). Izvestia AN SSSR, OTN, Mekhan. I Mashin 1 (1962), 131–137.
17. Cherepanov, G.P., “Mechanics of Brittle Materials.”, 1979, McGraw-Hill, New York.
18. Chiao, Y.-H., Clarke, D.R., Residual stress induced fracture in glass-sapphire composites: Planar geometry. Acta Met. 38 (1990), 251–258.
19. Comninou, M., The interface crack. J. Appl. Mech. 44 (1977), 631–636.
20. Comninou, M., Schmueser, D., The interface crack in a combined tension-compression and shear field. J. Appl. Mech. 46 (1979), 345–348.
21. Cotterell, B., Rice, J.R., Slightly curved or kinked cracks. Int. J. Fract. 16 (1980), 155–169.
22. Delannay, F., Warren, P., On crack interaction and crack density in strain-induced cracking of brittle films on ductile substrates. Acta Metall. Mater. 39 (1991), 1061–1072.
23. Drory, M.D., Thouless, M.D., Evans, A.G., On the decohesion of residually stressed thin films. Acta Met. 36 (1988), 2019–2028.
24. Dugdale, D., Yielding of steel sheets containing slits. J. Mech. Phys. Solids. 8 (1960), 100–108.
25. Dundurs, J., Edge-bonded dissimilar orthogonal elastic wedges. J. Appl. Mech. 36 (1969), 650–652.
26. England, A.H., A crack between dissimilar media. J. Appl. Mech. 32 (1965), 400–402.
27. Erdogan, F., Stress distribution in bonded dissimilar materials with cracks. J. Appl. Mech. 32 (1965), 403–410.
28. Erdogan, F., Arin, K., Penny-shaped interface crack between an elastic layer and a half space. Int. J. Engng. Sci. 10 (1972), 115–125.
29. Evans, A.G., Dalgleish, B.J., He, M., Hutchinson, J.W., On crack path selection and the interface fracture energy in bimaterial systems. Acta Metall. 37 (1989), 3249–3254.
30. Evans, A.G., Drory, M.D., Hu, M.S., The cracking and decohesion of thin films. J. Mater. Res. 3 (1988), 1043–1049.
31. Evans, A.G., Hutchinson, J.W., On the mechanics of delamination and spalling in compressed films. Int. J. Solids Structures 20 (1984), 455–466.
32. Evans, A.G., Hutchinson, J.W., Effects of non-planarity on the mixed mode fracture resistance of bimaterial interfaces. Acta Metall. Mater. 37 (1989), 909–916.
33. Evans, A.G., Röhle, M., Dalgleish, B.J., Charalambides, P.G., The fracture energy of bimaterial interfaces. Mater. Sci. Engng. A 126 (1990), 53–64.
34. Farris, R.J., Bauer, C.L., A self-determination method of measuring the surface energy of adhesion of coatings. J. Adhesion 26 (1988), 293–300.
35. Fleck, N.A., Hutchinson, J.W., Suo, Z., Crack path selection in a brittle adhesive layer. Int. J. Solids and Structures. 27 (1991), 1683–1703.
36. Friedrich, K., “Application of Fracture Mechanics to Composite Materials.”, 1989, Elsevier, New York.
37. Gecit, M.R., Fracture of a surface layer bonded to a half space. Int. J. Engng. Sci. 17 (1979), 287–295.
38. Gille, G., Strength of thin films and coatings., Chap. 7. Kaldis, E., (eds.) “Current Topics in Materials Science.”, 12, 1985, North-Holland.
39. Hayashi, K., Nemat-Nasser, S., Energy-release rate and crack kinking under combined loading. J. Appl. Mech. 48 (1981), 520–524.
40. He, M.-Y., Bartlett, A., Evans, A.G., Hutchinson, J.W., Kinking of a crack out of an interface: role of in-plane stress. J. Am. Ceram. Soc. 74 (1991), 767–771.
41. He, M.-Y., Evans, A.G., Initial cracking of thin films., 1990 Manuscript in preparation.
42. He, M.-Y., Evans, A.G., Finite element analysis of beam specimens used to measure delamination resistance of composites. J. Composites Tech. Res., 1990 (in press).
43. He, M.-Y., Hutchinson, J.W., Kinking of crack out of an interface. J. Appl. Mech. 56 (1989), 270–278.
44. He, M.-Y., Hutchinson, J.W., Kinking of a crack out of an interface: Tabulated solution coefficients. Available for a limited period from Marion Remillard, Pierce Hall 314, 1989, Division of Applied Sciences, Harvard University, Cambridge, Massachusetts 02138.
45. Ho, S., Suo, Z., Tunneling cracks in constrained layers., 1990 Manuscript in preparation.
46. Hu, M.S., Evans, A.G., The cracking and decohesion of thin films on ductile substrate. Acta Met. 37 (1989), 917–925.
47. Hu, M.S., Thouless, M.D., Evans, A.G., The decohesion of thin films from brittle substrates. Acta Met. 36 (1988), 1301–1307.
48. Hutchinson, J.W., Mixed mode fracture mechanics of interfaces. Rühle, M., Evans, A.G., Ashby, M.F., Hirth, J.P., (eds.) “Metal-Ceramic Interfaces,”, 1990, Pergamon Press, New York, 295–306.
49. Hutchinson, J.W., Mear, M.E., Rice, J.R., Crack paralleling an interface between dissimilar materials. J. Appl. Mech. 54 (1987), 828–832.
50. Jensen, H.M., Mixed mode fracture analysis of the blister test. Engin. J. Fracture Mech., 1990 (in press).
51. Jensen, H.M., Hutchinson, J.W., Kim, K.-S., Decohesion of a cut prestressed film on a substrate. Int. J. Solids Structures 26 (1990), 1099–1114.
52. Kamada, K., Higashida, Y., A fracture model of radiation blistering. J. Appl. Physics 50 (1979), 4131–4138.
53. Kinloch, A.J., “Adhesion and Adhesives,”, 1987, Chapman and Hall, London.
54. Lekhnitskii, S.G., “Theory of Elasticity of an Anisotropic Body,”, 1981, Mir Publishers, Moscow.
55. Liechti, K.M., Moire of crack-opening interferometry in adhesive fracture mechanics. Experimental Mechanics 25 (1985), 255–261.
56. Liechti, K.M., Chai, Y.-S., Asymmetric shielding in interfacial fracture under inplane shear. J. Appl. Mech, 1990 in press.
57. Liechti, K.M., Chai, Y.-S., Biaxial loading experiments for determining interfacial toughness. J. Appl. Mech, 1990 in press.
58. Liechti, K.M., Hanson, E.C., Nonlinear effects in mixed-mode interfacial delaminations. Int. J. Fracture 36 (1988), 199–217.
59. Malyshev, B.M., Salganik, R.L., The strength of adhesive joints using the theory of cracks. Int. J. fracture. Mech. 5 (1965), 114–128.
60. O'Brien, T.K., Mixed-mode strain-energy-release rate effects on edge delamination of composites. “Effects of Defects in Composite Materials,” ASTM STP 836, 1984, American Society for Testing and Materials, 125–142.
61. O'Dowd, N.P., Shih, C.F., Stout, M.G., Test geometries for measuring interfacial toughness., 1990 Submitted for publication.
62. Reimanis, I.E., Evans, A.G., The fracture resistance of a model metal/ceramic interface. Acta Metall. Mater., 1990 (in press).
63. Rice, J.R., A path independent integral and approximation analysis of strain concentration by notches and cracks. J. Appl. Mech. 35 (1968), 379–386.
64. Rice, J.R., Elastic fracture concepts for interfacial cracks. J. Appl. Mech. 55 (1988), 98–103.
65. Rice, J.R., Sih, G.C., Plane problems of cracks in dissimilar media. J. Appl. Mech. 32 (1965), 418–423.
66. Rice, J.R., Suo, Z., Wang, J.-S., Mechanics and thermodynamics of brittle interfacial failure in bimaterial systems. Rühle, M., Evans, A.G., Ashby, M.F., Hirth, J.P., (eds.) “Metal-Ceramic Interfaces”., 1990, Pergamon Press, New York, 269–294.
67. Rothschilds, R.J., Gillespie, J.W., Carlsson, L.A., Instability-related delamination growth in thermoset and thermo-plastic composites. “Composite Materials: Testing and Design,” ASTM STP 972, 1988, 161–179 J. D. Whitcomb.
68. Röhle, M., Evans, A.G., Ashby, M.F., Hirth, J.P., “Metal-Ceramic Interfaces,” Acta-Scripta Metallurgica Proc. Series 4, 1990, Pergamon Press, New York.
69. Sbaizero, O., Charalambides, P.G., Evans, A.G., Delamination cracking in a laminated ceramic matrix composite. J. Am. Ceram. Soc. 73 (1990), 1936–1940.
70. Shapery, R.A., Davidson, B.D., Prediction of energy release rate for mixed-mode delamination using classical plate theory. Appl. Mech. Rev. 43 (1990), S281–S287.
71. Shih, C.F., Asaro, R.J., Elastic-plastic analysis of cracks on bimaterial interfaces: Part I. Small scale yielding. J. Appl. Mech. 55 (1988), 299–316.
72. Sih, G.C., Paris, P.C., Irwin, G.R., On cracks in rectilinearly anisotropic bodies. Int. J. Fracture Mech. 1 (1965), 189–203.
73. Spearing, S.M., Evans, A.G., The role of fiber bridging in the delamination resistance of fiber-reinforced composites. Acta Metall. Mater., 1990 (in press).
74. Storakers, B., Nonlinear aspects of delamination in structural members. Germain, P., et al. (eds.) “Proc. XVIIth Int. Cong. Theor. Appl. Mech,”, 1988, Elsevier, Grenoble, France, 315–336.
75. Suga, T., Elssner, E., Schmander, S., Composite parameters and mechanical compatibility of material joints. J. Composite Materials 22 (1988), 917–934.
76. Suo, Z., Singularities interacting with interfaces and cracks. Int. J. Solids Structure 25 (1989), 1133–1142.
77. Suo, Z., Singularities, interfaces and cracks in dissimilar anisotropic media. Proc. R. Soc. Lond. A 427 (1990), 331–358.
78. Suo, Z., Failure of brittle adhesive joints. Appl. Mech. Rev. 43 (1990), S276–S279.
79. Suo, Z., Delamination specimens for orthotropic materials. J. Appl. Mech. 57 (1990), 627–634.
80. Suo, Z., Bao, G., Fan, B., Delamination R-curves phenomena due to damage. J. Mech. Phys. Solids, 1990 (in press).
81. Suo, Z., Bao, G., Fan, B., Wang, T.C., Orthotropy rescaling and implications for fracture in composites. Int. J. Solids and Structures, 1990 in press.
82. Suo, Z., Hutchinson, J.W., On sandwich test specimen for measuring interface crack toughness. Mater. Sci. Engng. A 107 (1989), 135–143.
83. Suo, Z., Hutchinson, J.W., Steady-state cracking in brittle substrate beneath adherent films. Int. J. Solids Structure 25 (1989), 1337–1353.
84. Suo, Z., Hutchinson, J.W., Interface crack between two elastic layers. Int. J. Fracture 43 (1990), 1–18.
85. Tada, H., Paris, P.C., Irwin, G.R., “The Stress Analysis of Cracks Handbook,”, 1985, Del Research, St. Louis, Missouri.
86. Thompson, J.M.T., Hunt, G.W., “A General Theory of Elastic Stability,”, 1973, Wiley, New York.
87. Thouless, M.D., Crack spacing in brittle films on elastic substrates. J. Am. Ceram. Soc. 73 (1990), 2144–2146.
88. Thouless, M.D., Fracture of a model interface under mixed-mode loading. Acta Met. 38 (1990), 1135–1140.
89. Thouless, M.D., Cao, H.C., Mataga, P.A., Delamination from surface cracks in composite materials. J. Mater. Sci. 24 (1989), 1406–1412.
90. Thouless, M.D., Evans, A.G., Ashby, M.F., Hutchinson, J.W., The edge cracking and spalling of brittle plates. Acta Met. 35 (1987), 1333–1341.
91. Thouless, M.D., Evans, A.G., Comment on the spalling and edge-cracking of plates. Scripta Met. and Mater. 24 (1990), 1507–1510.
92. Trantina, G.C., Combined mode crack extension in adhesive joints. J. Composite Materials 6 (1972), 271–285.
93. Wang, J.S., Suo, Z., Experimental determination of interfacial toughness using Brazil-nut-sandwich. Aca Met. 38 (1990), 1279–1290.
94. Wang, S.S., Mandell, J.F., McGarry, F.J., An analysis of the crack tip stress field in DCB adhesive fracture specimens. Int. J. Fracture 14 (1978), 39–58.
95. Wang, T.C., Shih, C.F., Suo, Z., Crack extension and kinking in laminates and bicrystals. Int. J. Solids Structures, 1990 (in press).
96. Whitcomb, J.D., Parametric analytical study of instability-related delamination growth. Compos. Sci. Technol. 25 (1986), 19–48.
97. Williams, J.G., On the calculation of energy release rates for cracked laminates. Int. J. Fracture 36 (1988), 101–119.
98. Williams, M.L., The stress around a fault or crack in dissimilar media. Bull. Seismol. Soc. Am. 49 (1959), 199–204.
99. Ye, T., Suo, Z., Evans, A.G., Thin film cracking and the roles of substrate and interface., 1990 Submitted for publication.
100. Yin, W.-L., Axisymmetric buckling and growth of a circular delamination in a compressed laminate. Int. J. Solids Structures 21 (1985), 503–514.
101. Zak, A.R., Williams, M.L., Crack point singularities at a bi-material interface. J. Appl. Mech. 30 (1963), 142–143.
102. Zdaniewski, W.A., Conway, J.C., Kirchner, H.P., Effect of joint thickness and residual stress on the properties of ceramic adhesive joints: II. Experimental results. J. Am. Ceram. Soc. 70 (1987), 104–109.