CrN-Ag nanocomposite coatings: Tribology at room temperature and during a temperature ramp

Surface and Coatings Technology

Volumn 204, Issue 9-10, 2010, Pages 1388-1394

  Mulligan, C P ^a,b   Blanchet, T A ^a   Gall, D ^a  

^a RENSSELAER POLYTECHNIC INSTITUTE   (United States)

^b US Army ARDEC   (United States)

Author keywords

CrN Ag; Friction; High temperature lubrication; Nanocomposite coating; Solid lubrication; Wear

Indexed keywords

ALUMINA BALLS; BALL-ON-DISK; COMPOSITE LAYER; FRICTION AND WEAR; FRICTION COEFFICIENTS; HIGH TEMPERATURE; LOW HARDNESS; LUBRICIOUS SURFACES; MATRIX; NANO-COMPOSITE COATING; OPTICAL PROFILOMETRY; OXIDATIVE DEGRADATION; REACTIVE MAGNETRON CO-SPUTTERING; ROOM TEMPERATURE; STAINLESS STEEL SUBSTRATES; SURFACE LAYERS; TEMPERATURE RAMP; TESTING TEMPERATURE; WEAR RATES; WEAR TRACKS;

COMPOSITE COATINGS; ENERGY DISPERSIVE SPECTROSCOPY; FRICTION; NANOCOMPOSITES; SOLID LUBRICANTS; SPUTTER DEPOSITION; STAINLESS STEEL; SURFACE ROUGHNESS; TRIBOLOGY;

SILVER;

EID: 71049176918     PISSN: 02578972     EISSN: None     Source Type: Journal    
DOI: 10.1016/j.surfcoat.2009.09.018     Document Type: Article

References (33)

1. Voevodin A.A., Zabinski J.S., and Muratore C. Tsinghua Sci. Technol. 10 (2005) 665
2. Wang W. Surf. Coat. Technol. 177-178 (2004) 12
3. Endrino J.L., Nainaparampil J.J., and Krzanowski J.E. Surf. Coat. Technol. 157 (2002) 95
4. Muratore C., Voevodin A.A., Hu J.J., and Zabinski J.S. Wear 261 (2006) 797
5. Muratore C., Hu J.J., and Voevodin A.A. Thin Solid Films 515 (2007) 3638
6. Voevodin A.A., Hu J.J., Jones J.G., Fitz T.A., and Zabinski J.S. Thin Solid Films 401 (2001) 187
7. Basnyat P., Luster B., Kertzman Z., Stadler S., Kohli P., Aouadi S., Xu J., Mishra S.R., Eryilmaz O.L., and Erdemir A. Surf. Coat. Technol. 202 (2007) 1011
8. Aouadi S.M., Bohnhoff A., Sodergren M., Mihut D., Rohde S.L., Xu J., and Mishra S.R. Surf. Coat. Technol. 201 (2006) 418
9. Mulligan C.P., and Gall D. Surf. Coat. Technol. 200 (2005) 1495
10. Kutschej K., Mitterer C., Mulligan C.P., and Gall D. Adv. Eng. Mater. 8 (2006) 1125
11. Sliney H.E. ASLE Trans. 29 (1986) 370
12. Donnet C., and Erdemir A. Surf. Coat. Technol. 180-181 (2004) 76
13. Honda F., and Goto M. Wear 259 (2005) 730
14. Maillat M., Chattopadhyay A.K., and Hintermann H.E. Surf. Coat. Technol. 61 (1993) 25
15. Mulligan C.P., Blanchet T.A., and Gall D. Surf. Coat. Technol. 203 (2008) 584
16. Musil J. Surf. Coat. Technol. 125 (2000) 322
17. Leyland A., and Matthews A. Wear (2000) 1
18. Tsui T.Y., Pharr G.M., Oliver W.C., Bhatia C.S., White R.L., Anders S., Anders A., and Brown I.G. Mater. Res. Soc. Symp. Proc. 383 (1995) 447
19. Marshall D.B., Noma T., and Evans A.G. J. Am. Ceram. Soc. 65 (1982) c175
20. Lima R.S., Kruger S.E., Lamouche G., and Marple B.R. J. Therm. Spray Technol. 14 (2005) 52
21. Leigh S.-H., Lin C.-K., and Berndt C.C. J. Am. Ceram. Soc. 80 (1997) 2093
22. Amitay-Sadovsky E., and Wagner H.D. J. Polym. Sci., B 37 (1999) 523
23. Goldstein J.I., Newbury D.E., Echlin P., Joy D.C., Romig Jr. A.D., Lyman C.E., Fiori C., and Lifshin E. Scanning Electron Microscopy and X-Ray Microanalysis. 2nd Ed. (1992), Plenum Press, New York 89
24. Gall D., Shin C.-S., Spila T., Odén M., Senna M.J.H., Greene J.E., and Petrov I. J. Appl. Phys. 91 (2002) 3589
25. Frederick J.R., and Gall D. J. Appl. Phys. 98 (2005) 054906
26. Gall D., Shin C.-S., Haasch R.T., Petrov I., and Greene J.E. J. Appl. Phys. 91 (2002) 5882
27. Zhao Z.B., Rekb Z.U., Yalisovec S.M., and Bilelloc J.C. Surf. Coat. Technol. 185 (2004) 329
28. Polcar T., Parreira N.M.G., and Novak R. Surf. Coat. Technol. 201 (2007) 5228
29. J.A. Williams, Engineering Tribology, p. 121.
30. Lamastra F.R., Leonardi F., Montanari R., Casadei F., Valente T., and Gusmano G. Surf. Coat. Technol. 200 (2006) 6172
31. Kleiner R.N. In: Lynch C.T. (Ed). Handbook of Materials Science vol. 2 (1975), CRC Press 355
32. Munro R.G. J. Am. Ceram. Soc. 80 (1997) 1919
33. Goto M., and Honda F. In: Erdemir A., and Martin J.-M. (Eds). Superlubricity (2007), Elsevier 179