EU landfill waste acceptance criteria and EU Hazardous Waste Directive compliance testing of incinerated sewage sludge ash

Waste Management

Volumn 30, Issue 1, 2010, Pages 63-71

  Donatello, S ^a   Tyrer, M ^a   Cheeseman, C R ^a  

^a IMPERIAL COLLEGE LONDON   (United Kingdom)

Author keywords

[No Author keywords available]

Indexed keywords

ASH SAMPLES; ECOTOXICITY; HAZARDOUS WASTE LANDFILLS; HAZARDOUS WASTES; LANDFILL WASTES; LEACHING TEST; NON HAZARDOUS WASTES; SEWAGE SLUDGE ASH; SEWAGE SLUDGE INCINERATOR;

HAZARDOUS MATERIALS; LAND FILL; LEACHING; SELENIUM; SEWAGE SLUDGE; SLUDGE DISPOSAL; ZINC;

WASTE MANAGEMENT;

HEAVY METAL; OXIDE; PHOSPHATE; SELENIUM; ZINC;

COMPLIANCE; EUROPEAN UNION; HAZARDOUS WASTE; INCINERATION; LANDFILL; WASTE DISPOSAL; WASTE MANAGEMENT;

ARTICLE; ASH; ECOTOXICITY; HAZARDOUS WASTE; INCINERATION; LANDFILL; LEACHING; PRIORITY JOURNAL; RECYCLING; SLUDGE; SLUDGE TREATMENT; UNITED KINGDOM; WASTE DISPOSAL; WASTE MANAGEMENT; X RAY DIFFRACTION;

CONSERVATION OF NATURAL RESOURCES; CRYSTALLIZATION; EQUIPMENT DESIGN; EUROPEAN UNION; HAZARDOUS WASTE; HYDROGEN-ION CONCENTRATION; METALS; METALS, HEAVY; OXIDES; PHOSPHATES; REFUSE DISPOSAL; SEWAGE; TEMPERATURE; X-RAY DIFFRACTION; ZINC;

EURASIA; EUROPE; UNITED KINGDOM; WESTERN EUROPE;

EID: 70649099128     PISSN: 0956053X     EISSN: None     Source Type: Journal    
DOI: 10.1016/j.wasman.2009.09.028     Document Type: Article

References (46)

1. Al Sayed M.H., Madany I.M., and Buali A.R.M. Use of sewage sludge ash in asphaltic paving mixes in hot regions. Construction and Building Materials 9 (1995) 19-23
2. Anderson M., Skerratt R.G., Thomas J.P., and Clay S.D. Case study involving using fluidised bed incinerator sludge ash as a partial clay substitute in brick manufacture. Water Science and Technology 34 (1996) 507-515
3. Arundel J. Sewage and Industrial Effluent Treatment. 2nd ed. (2000), Blackwell Science, Oxford, UK
4. Bhogal A., Nicholson F.A., Chambers B.J., and Shepherd M.A. Effects of past sewage sludge additions on heavy metal availability in light textured soils: implications for crop yields and metal uptakes. Environmental Pollution 121 (2003) 413-423
5. Cheeseman C.R., and Virdi G.S. Properties and microstructure of lightweight aggregate produced from sintered sewage sludge ash. Resources, Conservation and Recycling 45 (2005) 18-30
6. Cheeseman C.R., Sollars C.J., and McEntee S. Properties, microstructure and leaching of sintered sewage sludge ash. Resources, Conservation and Recycling 40 (2003) 13-25
7. Chen J.C., Wey M.Y., Su J.L., and Hsieh S.M. Two-stage simulation of the major heavy-metal species under various incineration conditions. Environment International 24 (1998) 451-466
8. Chiou I.J., Wang K.S., Chen C.H., and Lin Y.T. Lightweight aggregate made from sewage sludge and incinerated ash. Waste Management 26 (2006) 1453-1461
9. Corella J., and Toledo J.M. Incineration of doped sludges in fluidized bed. Fate and partitioning of six targeted heavy metals. I. Pilot plant used and results. Journal of Hazardous Materials 80 (2000) 81-105
10. Cyr M., Coutand M., and Clastres P. Technological and environmental behaviour of sewage sludge ash (SSA) in cement-based materials. Cement and Concrete Research 37 (2007) 1278-1289
11. Diaz-Somoano M., Unterberger S., and Hein K.R.G. Prediction of trace element volatility during co-combustion processes. Fuel 85 (2006) 1087-1093
12. Eaton A.D., Clesceri L.S., Rice E.W., and Greenberg A.E. Standard methods for the examination of water and wastewater. 21st ed. (2005), American Public Health Association, Washington
13. Endo H., Nagayoshi Y., and Suzuki K. Production of glass ceramics from sewage sludge. Water Science and Technology 36 (1997) 235-241
14. Environment Agency, 2005. Guidance on Sampling and Testing of Wastes to Meet Landfill Waste Acceptance Procedures.
15. Environment Agency, 2008. Interpretation of the Definition and Classification of Hazardous Waste, second ed., version 2.2.
16. Fraissler G., Joller M., Mattenberger H., Brunner T., and Obernberger I. Thermodynamic equilibrium calculations concerning the removal of heavy metals from sewage sludge ash by chlorination. Chemical Engineering and Processing 48 (2009) 152-164
17. Health and Safety Commission, 2005. Approved Supply List. Information Approved for the Classification and Labelling of Substances and Preparations Dangerous for Supply, eighth ed. HSE Books, Norwich.
18. Horwell C.J. Grain-size analysis of volcanic ash for the rapid assessment of respiratory health hazard. Journal of Environmental Monitoring 9 (2007) 1107-1115
19. Jakob A., Stucki S., and Struis R.P.W.J. Complete heavy metal removal from fly ash by heat treatment: influence of chlorides on evaporation rates. Environmental Science and Technology 30 (1996) 3275-3283
20. Kataoka S., Nagatsuka E., and Miyamoto T. Reducing heavy metal contents in sewage sludge incineration ash with high-temperature dust collection method. Journal of Japan Sewage Works Association 43 (2006) 125-132 (in Japanese)
21. Lin K.L., and Lin C.Y. Hydration characteristics of waste sludge ash utilized as raw cement material. Cement and Concrete Research 35 (2005) 1999-2007
22. Lin K.L., Chiang K.Y., and Lin C.Y. Hydration characteristics of waste sludge ash that is reused in eco-cement clinkers. Cement and Concrete Research 35 (2005) 1074-1081
23. 2+ green phosphor nanoparticles obtained by a polymer-assisted sol-gel method. Scripta Materialia 58 (2008) 655-658
24. Marani D., Braguglia C.M., Mininni G., and Maccioni F. Behaviour of Cd, Cr, Mn, Ni, Pb and Zn in sewage sludge incineration by fluidised bed furnace. Waste Management 23 (2003) 117-124
25. 4+ luminescence in glass ceramic silica. Journal of Luminescence 128 (2008) 1787-1790
26. Merino I., Arevalo L.F., and Romero F. Preparation and characterization of ceramic products by thermal treatment of sewage sludge ashes mixed with different additives. Waste Management 27 (2007) 1829-1844
27. Monzo J., Paya J., Borrachero M.V., and Corcoles A. Use of sewage sludge ash (SSA) - cement admixtures in mortars. Cement and Concrete Research 26 (1996) 1389-1398
28. Monzo J., Paya J., Borrachero M.V., and Peris-Mora E. Mechanical behaviour of mortars containing sewage sludge ash (SSA) and Portland cements with different tricalcium aluminate content. Cement and Concrete Research 29 (1999) 87-94
29. Monzo J., Paya J., Borrachero M.V., and Girbes I. Reuse of sewage sludge ash (SSA) in cement mixtures: the effect of SSA on the workability of cement mortars. Waste Management 23 (2003) 373-381
30. Murakami T., Suzuki Y., Nagasawa H., Yamamoto T., Koseki T., Hirose H., and Okamoto S. Combustion characteristics of sewage sludge in an incineration plant for energy recovery. Fuel Processing Technology 90 (2009) 778-783
31. OFWAT, 2007. The June Return: Sewerage Service Explanatory Factors (Table 17g).
32. Pan S.-C., Tseng D.-H., Lee C.-C., and Lee C. Influence of the fineness of sewage sludge ash on the mortar properties. Cement and Concrete Research 33 (2003) 1749-1754
33. Park J.P., Moon S.O., and Heo J. Crystalline phase control of glass ceramics obtained from sewage sludge fly ash. Ceramics International 29 (2003) 223-227
34. Richards B.K., Steenhuis T.S., Peverly J.H., and McBride M.B. Effect of sludge-processing mode, soil texture and soil pH on metal mobility in undisturbed soil columns under accelerated loading. Environmental Pollution 109 (2000) 327-346
35. 2+ containing orthosilicates. Contributions to Mineralogy and Petrology 37 (1972) 221-227
36. 2. Waste Management 17 (1997) 231-236
37. Tay J.H., and Show K.Y. Utilization of municipal wastewater sludge as building and construction materials. Resources, Conservation and Recycling 6 (1992) 191-204
38. Torri S.I., and Lavado R.S. Dynamics of Cd, Cu and Pb added to soil through different kinds of sewage sludge. Waste Management 28 (2008) 821-832
39. Torri S.I., and Lavado R.S. Zinc distribution in soils amended with different kinds of sewage sludge. Journal of Environmental Management 88 (2008) 1571-1579
40. Wainwright P.J., and Cresswell D.J.F. Synthetic aggregates from combustion ashes using an innovative rotary kiln. Waste Management 21 (2001) 241-246
41. Wang K.S., and Chiou I.J. Foamed lightweight materials made from mixed scrap metal waste powder and sewage sludge ash. Waste Management and Research 22 (2004) 383-389
42. 3 on the distribution of the heavy metals Cd, Cu, Cr and Zn in a simulated multimetal incineration system. Environment International 26 (2001) 257-263
43. Wang K.S., Tseng C.J., Chiou I.J., and Shih M.H. The thermal conductivity mechanism of sewage sludge ash lightweight materials. Cement and Concrete Research 35 (2005) 803-809
44. Wang K.-S., Chiou I.-J., Chen C.-H., and Wang D. Lightweight properties and pore structure of foamed material made from sewage sludge ash. Construction and Building Materials 19 (2005) 627-633
45. Wiebusch B., and Seyfried C.F. Utilization of sewage sludge ashes in the brick and tile industry. Water Science and Technology 36 (1997) 251-258
46. Ye C., Dickerson M.B., Haluska M.S., Kang Z., Summers C.J., and Sandhage K.H. Manganese-doped zinc orthosilicate-bearing phosphor microparticles with controlled three-dimensional shapes derived from diatom frustules. Journal of the American Ceramic Society 90 (2007) 1304-1308