Characterization of microstructures, mechanical properties, and oxidation behavior of coherent A2 + L21 Fe-Al-Ti

Journal of Materials Research

Volumn 24, Issue 11, 2009, Pages 3412-3421

  Krein, Ronny ^a,c   Palm, Martin ^a   Heilmaier, Martin ^b  

^a MAX PLANCK INSTITUT FÜR EISENFORSCHUNG GMBH   (Germany)

^b OTTO VON GUERICKE UNIVERSITY   (Germany)

^c SALZGITTER MANNESMANN FORSCHUNG GMBH   (Germany)

Author keywords

[No Author keywords available]

Indexed keywords

AGING TIME; AL-BASED ALLOYS; AL-TI ALLOYS; CREEP PROPERTIES; EVOLUTION OF THE MICROSTRUCTURE; FLOW STRENGTH; HARDNESS MEASUREMENT; OXIDATION BEHAVIORS; TRANSITION TEMPERATURE;

ALUMINUM; BINARY ALLOYS; COMPRESSIVE STRENGTH; CREEP; CREEP RESISTANCE; IRON ALLOYS; MECHANICAL PROPERTIES; MICROSTRUCTURE; OXIDATION; SCANNING ELECTRON MICROSCOPY;

TITANIUM ALLOYS;

EID: 70450137087     PISSN: 08842914     EISSN: None     Source Type: Journal    
DOI: 10.1557/jmr.2009.0403     Document Type: Article

References (53)

1. D. Hardwick and G. Wallwork: Iron-aluminium alloys: A review of their feasibility as high-temperature materials. Rev. HighTemp. Mater. 4, 47 (1978).
2. 3Al, in Intermetallic Compounds, Vol.2, Practice, edited by J.H. Westbrook and R.L. Fleischer (John Wiley & Sons, Chichester, UK, 1995), p. 199.
3. C.G. McKamey: Iron aluminides, in Physical Metallurgy and Processing of Intermetallic Compounds, edited by N.S. Stoloff and V.K. Sikka (Chapman & Hall, New York, 1996), p. 351.
4. D.G. Morris and M.A. Morris: Strengthening at intermediate temperatures in iron aluminides. Mater. Sci. Eng., A 239, 23 (1997).
5. D.G. Morris: Possibilities for high-temperature strengthening in iron aluminides. Intermetallics 6, 753 (1998).
6. M. Palm, R. Krein, S. Milenkovic, G. Sauthoff, D. Risanti, C. Stallybrass, and A. Schneider: Strengthening mechanisms for Fe-Al-based alloys with increased creep resistance at high temperatures, in Advanced Intermetallic-Based Alloys, edited by J. Wiezorek, C.L. Fu, M. Takeyama, D. Morris, and H. Clemens (Mater. Res. Soc. Symp. Proc. 980, Warrendale PA, 2007), 1101-1201
7. 3Al, in High-Temperature Ordered Intermetallic Alloys II, edited by N.S. Stoloff, C.C. Koch, C.T. Liu, and O. Izumi (Mater. Res. Soc. Symp. Proc. 81, Pittsburgh, PA, 1987), p. 329.
8. A. Gorzel, M. Palm, and G. Sauthoff: Constitution-based alloy selection for the screening of intermetallic Ti-Al-Fe alloys. Z. Metallkd. 90, 64 (1999).
9. S-M. Zhu, K. Sakamoto, M. Tamura, and K. Iwasaki: A comparative study of the high temperature deformation behavior of Fe-25A1 and Fe-25Al-10Ti alloys. Scr. Mater. 42, 905 (2000).
10. 3Al. Mater. Trans. Jap. Inst. Met. 42, 484 (2001).
11. U. Prakash and G. Sauthoff: Structure and properties of Fe-Al-Ti intermetallic alloys. Intermetallics 9,107 (2001).
12. 3Al-based Fe-Al-Ti-X alloys with X = V, Cr, Nb, or Mo. Intermetallics 11, 71 (2003).
13. 1-ordered Fe-Al-Ti alloys. Intermetallics 12, 1345 (2004).
14. F. Dobes, P. Kratochvil, and K. Milicka: Creep of cast Fe-36A12Ti alloy. Intermetallics 14, 1199 (2006).
15. R. Krein and M. Palm: The influence of Cr and B additions on the mechanical properties and oxidation behavior of L2i-ordered FeAl-Ti-based alloys at high temperatures. Acta Mater. 56, 2400 (2008).
16. 3Al. Mater. Sci. Eng. 91, 223 (1987).
17. 3Al. Acta Metall. Mater. 43, 3885 (1995).
18. I. Ohnuma, C.G. Schön, R. Kainuma, G. Inden, and K. Ishida: Ordering and phase separation in the b.c.c. phase of the Fe-Al-Ti system. Acta Mater. 46, 2083 (1998).
19. M. Palm and J. Lacaze: Assessment of the Al-Fe-Ti system. Intermetallics 14, 1291 (2006).
20. M. Palm, G. Inden, and N. Thomas: The Fe-Al-Ti system. J. Phase Equilib. 16, 209 (1995).
21. M. Palm: Concepts derived from phase diagram studies for the strengthening of Fe-Al-based alloys. Intermetallics 13, 1286 (2005).
22. S. Matsumura, A. Sonobe, K. Oki, and T. Eguchi: Ordering with phase separation in an Fe-Al-Si alloy, in Phase Transformations in Solids (Mater. Res. Soc. Symp. Proc. 21, 1984), p. 269.
23. 3-B2-a phase relations in Fe-Al-Ti alloys. Metall. Trans. A 18, 509 (1987).
24. 3) phases at a/2 100 anti-phase boundary in a Fe-23 at.%Al-8.5 at.%Ti alloy. Scr. Mater. 57, 917 (2007).
25. T. Maebashi, T. Kozakai, and M. Doi: Phase equilibria in ironrich Fe-Al-V ternary alloy system. Z. Metallkd. 95, 1005 (2004).
26. H. Ackermann: Experimental investigation and Monte-Carlo simulation of chemical ordering reactions in ternary cubic bodycentered Fe-Co-Al alloys. Doctoral thesis (Universität Dortmund, 1988), pp. 1-193.
27. I. Jung and G. Sauthoff: Creep behavior of the intermetallic B2 phase (Ni,Fe)Al with strengthening soft precipitates. Z. Metallk. 80, 484 (1989).
28. G. Marcon and S. Lay: Miscibility gap of the Fe-Ni-Al partial system relative to the physical properties of alloys. II. Alloys with a high Fe content. Rev. Metall. CIT/SGM 96, 155 (1999).
29. C. Stallybrass, A. Schneider, and G. Sauthoff: The strengthening effect of (Ni,Fe)Al precipitates on the mechanical properties at high temperatures of ferritic Fe-Al-Ni-Cr alloys. Intermetallics 13, 1263 (2005).
30. D.J. Larson, T.J. Prosa, S.L.P. Kostrna, M. Ali, T.F. Kelly, C. Stallybrass, A. Schneider, G. Sauthoff, and J. Deges: A correlative study of an iron-base superalloy using transmission electron microscopy and atom probe tomography. Microsc. Microanal. 12 (Supp 2), 1748 (2006).
31. D.M. Dimiduk, M.G. Mendiratta, D. Banerjee, and H.A. Lipsitt: A structural study of ordered precipitates in an ordered matrix within the Fe-Al-Nb system. Ada Metall. 36, 2947 (1988).
32. D.G. Morris, L.M. Requejo, and M.A. Munoz-Morris: A study of precipitation in DO3 ordered Fe-Al-Nb alloy. Intermetallics 13, 862 (2003).
33. D.G. Morris, M.A. Munoz-Morris, L.M. Requejo, and C. Baudin: Strengthening at high temperatures by precipitates in Fe-Al-Nb alloys. Intermetallics 14, 1204 (2006).
34. D.G. Morris, L.M. Requejo, and M.A. Munoz-Morris: Age hardening in some Fe-Al-Nb alloys. Scr. Mater. 54, 393 (2006).
35. F. Stein and M. Palm: Re-determination of transition temperatures in the Fe-Al system by differential thermal analysis. Int. J. Mater. Res. 98, 580 (2007).
36. D. Risanti, J. Deges, L. Falat, S. Kobayashi, J. Konrad, M. Palm, B. Pöter, A. Schneider, C. Stallybrass, and F. Stein: Dependence of the brittle-to-ductile transition temperature (BDTT) on the Al content of Fe-Al alloys. Intermetallics 13, 1337 (2005).
37. M. Palm, N. Thomas, and G. Inden: The Fe-Al-Ti system. Rev. Metall. SF 2M, 197 (1996).
38. 3) twophase microstructure in a Fe-23 Al-7 Ti alloy. Mater. Trans. Jap. Inst. Met. 48, 2993 (2007).
39. C.W. Su, S.C. Jeng, C.G. Chao, and T.F. Liu: Orientation relationship between C14 precipitate and (A2 + DO3) matrix in an Fe-20at.%Al-8at.%Ti alloy. Scr. Mater. 57, 125 (2007).
40. R. Ducher, F. Stein, B. Viguier, M. Palm, and J. Lacaze: A reexamination of the liquidus surface of the Al-Fe-Ti system. Z. Metallkd. 94, 396 (2003).
41. 3Al-based alloy with a-a″ microstructure. Acta Mater. 45, 811 (1997).
42. 1 ordered Fe-Al-Ti based alloys. Mater. Sci. Eng., A 460-461, 174 (2007).
43. 2 single crystals. Acta Metall. 24, 469 (1976).
44. M. Heilmaier and B. Reppich: Creep lifetime prediction of oxide-dispersion-strengthened nickel-base superalloys: A micromechanically based approach. Metall. Mater. Trans. A 27, 3861 (1996).
45. H. Mehrer, M. Eggersmann, A. Gude, M. Salamon, and B. Sepiol: Diffusion in intermetallic phases of the Fe-Al and Fe-Si systems. Mater. Sci. Eng., A 239-240, 889 (1997).
46. A. Lawley, J.A. Coll, and R.W. Cahn: Influence of crystallographic order on creep of iron-aluminum solid solutions. Trans. AIME 218, 166 (1960).
47. J.D. Whittenberger: The influence of grain size and composition on slow plastic flow in FeAl between 1100 and 1400 K. Mater. Sci. Eng. 77, 103 (1986).
48. D.H. Sastry and R.S. Sundar: Effect of alloying elements on high-temperature creep of nickel and iron aluminides, in International Symposium on Nickel and Iron Aluminides: Processing, Properties, and Applications, edited by S.C. Deevi, P.J. Maziasz, V.K. Sikka, and R.W. Cahn (ASM International, Materials Park, OH, 1997), p. 123.
49. S. Milenkovic and M. Palm: Microstructure and mechanical properties of directionally solidified Fe-Al-Nb eutectic. Intermetallics 16, 1212 (2008).
50. 3Al-based alloys with strengthening boride precipitates. Intermetallics 15, 1172 (2007).
51. B. Pöter, F. Stein, R. Wirth, and M. Spiegel: Early stages of protective oxide layer growth on binary iron aluminides. Z. Phys. Chem. 219, 1489 (2005).
52. P.F. Tortorelli and J.H. DeVan: Behavior of iron aluminides in oxidizing and oxidizing/sulfidizing environments. Mater. Sci. Eng., A 153, 573 (1992).
53. R. Krein: Investigation of iron aluminium alloys with strengthening borides for high-temperature applications. Masters thesis (Technische Fachhochschule Georg Agrícola zu Bochum, 2006), pp. 1-78.