Fabrication and characterization of micro dent array produced by laser shock peening on aluminum surfaces

Transactions of the North American Manufacturing Research Institution of SME

Volumn 37, Issue , 2009, Pages 159-166

  Caslaru, R ^a   Sealy, M P ^a   Guo, Y B ^a   Chen, S C ^b  

^a University of Alabama   (United States)

^b The University of Texas at Austin   (United States)

Author keywords

Laser shock peening; Micro dent array; Surface integrity; Surface texturing

Indexed keywords

ALTERNATIVE METHODS; ALUMINUM SURFACE; ARRAY SURFACE; BULK MATERIALS; ENHANCED SURFACE; FREE OF CRACKS; FRICTION AND WEAR; INDUCED STRAIN; LASER POWER; LASER SHOCK PEENING; LUBRICANT RESERVOIRS; ROLLING CONTACTS; STRAIN-RATE HARDENING; SURFACE PATTERNING; SURFACE-TEXTURING; X-Y TABLE;

ALUMINUM; FRICTION; INDUSTRIAL RESEARCH; LASERS; PULSED LASER APPLICATIONS; QUALITY ASSURANCE; STRAIN RATE; SURFACE TOPOGRAPHY; TEXTURING;

SURFACES;

EID: 70449652546     PISSN: 10473025     EISSN: None     Source Type: Conference Proceeding    
DOI: None     Document Type: Conference Paper

References (41)

1. Anderson, P., J. Koskinen, S. Varjus, Y. Gerbig, H. Haefke, S. Georgiou, B. Zmhud, and W. Buss (2007). "Microlubrication effect by laser-textured steel surfaces." Wear, 262, pp. 369-379.
2. Ballard, P., J. Fournier, R. Fabbro, and J. Frelat (1991). "Residual stresses induced by laser-shocks." J. de Physique IV, C3, pp. 487-494.
3. Berthe, L, R. Fabbro, P. Peyre, L. Tollier, and E. Bartnicki (1997). "Shock waves from a water-confined laser-generated plasma." J. App. Physics, 82, pp. 2826-2832.
4. Berthe, L, R. Fabbro, P. Peyre, and E. Bartnicki (1999). "Wavelength dependent laser shock-wave generation in the water-confinement regime." App. Physics, 85, pp. 7552-7555.
5. Blatter, A., M. Maillat, S.M. Pimenov, G. Shafeev, A.V. Simakin, and N. Loubnin (1999). "Lubricated sliding performance of laser-patterned sapphire." Wear, 232, pp. 226-230.
6. Braisted, W. and R. Brockman (1998). "Finite element simulation of laser shock peening." Int. J. Fatigue, 21, pp. 719-724.
7. Chen, H., Y. Wang, J. Kysar, and Y.L. Yao (2004). "Systematical characterization of material response to microscale laser shock peening." J. Manuf. Sci. Eng., 740, pp. 740-749.
8. Clauer, A. and B. Fairland (1979). "Interaction of laser-induced stress waves with metals." ASM Conference Applications of Laser in Material Processing, Washington DC., ASM Int., Material Park, OH 44073-0002, pp. 1-22.
9. Devaux, D., R. Fabbro, L. Tollier, and E. Bartnicki (1993). "Generation of shock waves by laser-matter interaction in confined geometries." Journal de Physique IV, C7, pp. 179-182.
10. Ding, K. and L. Ye (2003). "Three-dimensional dynamic finite element analysis of multiple laser shock peening processes." Surf. Eng. 19-5, pp. 351-358.
11. Ding, K. and L. Ye (2006). "Laser shock peening. Performance and process simulation." Woodhead Publishing Ltd.
12. Dumitru, G., V. Romano, P. Weber, H. Haefke, Y. Gerbig, and E. Pfluger (2000). "Laser microstructuring of steel surfaces for tribological applications." App. Physics A, 70, pp. 485-487.
13. Etsion, I. (2003). "A laser surface textured hydrostatic mechanical seal." Sealing Tech., 2003, pp. 6-10.
14. Etsion, I. (2005). "State of art in laser surface texturing." J. Tribology, 127, pp. 248-253.
15. Fabbro, R., J. Fournier, P. Ballard, D. Devaux, and J. Virmont (1990). "Physical study of laser-produced plasma in confined geometry." J. App. Physics, 68, pp. 745-754.
16. Fairand, B.P., B.A. Wilcox, W.J. Gallagher, and D.N. Williams (1972). "Laser shock-induced microstructural and mechanical property changes in 7075 aluminum." J. App. Physics, 43, pp. 3893-3895.
17. Fairand, B.P. and A.H. Clauer (1976). "Effect of water and paint coatings on the magnitude of laser-generated shock waves." Optics Communications, 14-3, pp. 588-591.
18. Fan, Y., Y. Wang, S. Vukelic, and Y.L. Yao (2005). "Wave-solid interactions in laser-shocked-induced deformation processes." J. App. Physics, 98, pp. 123-131.
19. Fan, Y., Y. Wang, J.W. Kysar, and Y.L. Yao (2007). "Microscale laser peen forming of single crystal: dynamic deformation and anisotropy." Trans. SME/NAMRI, 35, pp. 383-390.
20. Friedrich, C.R. (2002). "Micromechanical machining of high aspect ratio prototypes." Microsystem Tech., 8, pp. 343-350.
21. Geiger, M, U. Popp, and U. Engel (2002). "Excimer laser micro texturing of cold forging tool surfaces-influence on tool life." Ann. CIRP 51/1, pp. 231-234.
22. Haefke, H., Y. Gerbig, G. Dumitru, and V. Romano (2000). "Microtexturing of functional surfaces for improving their tribological performance." Proc. Int. Tri. Conf., Nagasaky.
23. Iordanova, I., V. Antonov, and S. Gurkovsky (2002). "Changes of microstructure and mechanical properties of cold-rolled low carbon-steel due to its surface treatment by Nd:glass pulsed laser." Surf. Coatings Tech., 153, pp. 267-275.
24. Kulkani, K., Z. Chang, and S. Lei (2004). "Surface micro/nanostructuring of cutting tool materials by femtosecond laser." Trans. SME/NAMRI, 32, pp. 25-32.
25. Masse, J.E. and G. Barreau (1995). "Laser generation of stress waves in metal." Surf. Coatings Tech., 70, pp. 179-91.
26. Nakatsuji, T. and A. Mori (2001). "The tribological effect of electrolytically produced micro-pools and phosphoric compounds on medium carbon steel surfaces in rolling-sliding contact." Tri. Trans., 44, pp. 173-178.
27. Nakatsuji, T. and A. Mori (2002). "The tribological effect of mechanically produced micro-dents by a micro diamond pyramid on medium carbon steel surfaces in rolling-sliding contact." Mechanica, 66, pp. 663-674.
28. Nalla, R., I. Altenberg, U. Noster, G.Y. Liu, B. Scholtes, and R. Ritchie (2003). "On the influence of mechanical surface treatments-deep rolling and laser shock peening - on the fatigue behavior of Ti-6AI-4V at ambient and elevated temperatures." Mater. Sci. Eng., A355, pp. 216-230.
29. Pettersson, U. and S. Jacobson (2003). "Influence of surface texture on boundary lubricated sliding contacts." Tri. Int., 36, pp. 857-864.
30. Peyre, P., R. Fabbro, P. Merrien, and H.P. Lieurade (1996). "Laser shock processing of aluminum alloys: application to high cycle fatigue behavior." Mater. Sci. Eng., A210, pp. 102-115.
31. Romano, V., P. Weber, G. Dumitru, S. Pimenov, T.V. Kononenko, V. Konov, H. Haefke, and G. Gerbig (2003). "Laser surface microstructuring to improve tribological systems." Proc. SPIE, 5121, pp. 199-211.
32. Ruschau, J., J. Reji, S.R. Thompson, and N. Theodore (1999). "Fatigue crack nucleation and growth rate behavior of laser shock peened titanium." Int. J. Fatigue, 21, pp. 199-209.
33. Sealy, M.P. and Y.B. Guo (2008). "Fabrication and finite element simulation of μ-laser shock peening for micro dents," Int. J. Comp. Methods in Eng. Sci. & Mech. (in press).
34. Wakuda, M., Y. Yamauchi, S. Kanzaki, and Y. Yasuda (2003). "Effect of surface texturing on friction reduction between ceramic and steel materials under lubricated sliding contact." Wear, 254, pp. 356-363.
35. Warren, A., Y.B. Guo (2007). "FEA modeling and analysis of 3D pressure and mechanical behavior at high strain rate in micro laser peening," Trans. NAMRI/SME, 35, pp. 409-416.
36. Warren, A., Y.B. Guo, and S.C. Chen (2007). "Massive parallel laser shock peening: simulation, analysis, and validation." Int. J. Fatigue, 30, pp. 188-197.
37. White, R.M. (1963). "Elastic wave generation by electron bombardment or electromagnetic wave absorption." J. App. Physics, 34, pp. 2123-2127.
38. Winburn, D.C. (1987). "What every engineer should know about lasers." Marcel Dekker Inc. New York.
39. Yang, J., Y.C. Her, H. Nanlin, and A.CIauer (2000). "Laser shock peening on fatigue behavior of 2024-T3 Al alloy with fastener holes and stopholes." Mater. Sci. Eng., A298, pp. 296-305.
40. Zhang, W. and Y.L. Yao (2002). "Micro scale laser shock processing of metallic components." J. Manuf. Sci. Eng., 124, pp. 369-378.
41. Zhang, H. and C. Yu (1998). "Laser shock processing of 2024-T62 aluminum alloy." Mater. Sci. Eng., A257, pp. 322-327.