Parameter estimation in a multidimensional granulation model

Powder Technology

Volumn 197, Issue 3, 2010, Pages 196-210

  Braumann, Andreas ^a   Kraft, Markus ^a   Mort, Paul R ^b  

^a UNIVERSITY OF CAMBRIDGE   (United Kingdom)

^b PROCTER AND GAMBLE COMPANY   (United States)

Author keywords

Agglomeration; Granulation; Modelling; Multidimensional population balance; Response surface methodology

Indexed keywords

BINDER COMPOSITION; EXPERIMENTAL DESIGN; IMPELLER SPEED; MULTI-DIMENSIONAL MODEL; MULTIDIMENSIONAL POPULATION BALANCE; PARTICLE TECHNOLOGY; PORE VOLUME; POROUS PARTICLE; PROCESS CONDITION; RESPONSE SURFACE METHODOLOGY; RESPONSE SURFACE TECHNIQUES; WET GRANULATION;

AGGLOMERATION; BINDERS; COALESCENCE; COMPACTION; GRANULATION; PARAMETER ESTIMATION; POLYETHYLENE GLYCOLS; POROUS MATERIALS; RATE CONSTANTS; SIMULATORS; SUGAR (SUCROSE); SUGARS; SURFACE PROPERTIES;

PARTICLES (PARTICULATE MATTER);

MACROGOL; SUGAR; WATER;

ARTICLE; CHEMICAL COMPOSITION; CHEMICAL REACTION; CONTROLLED STUDY; DRUG GRANULE; EXPERIMENTAL MODEL; MATHEMATICAL ANALYSIS; PARTICLE SIZE; POROSITY; PREDICTION; PROCESS MODEL; RESPONSE SURFACE METHOD; SENSITIVITY ANALYSIS; VELOCITY; VISCOSITY;

EID: 70449651666     PISSN: 00325910     EISSN: None     Source Type: Journal    
DOI: 10.1016/j.powtec.2009.09.014     Document Type: Article

References (41)

1. Tardos G.I., Khan M.I., and Mort P.R. Critical parameters and limiting conditions in binder granulation of fine powders. Powder Technology 94 (1997) 245-258
2. Hapgood K.P., Litster J.D., and Smith R. Nucleation regime map for liquid bound granules. AIChE Journal 49 (2003) 350-361
3. Iveson S.M., and Litster J.D. Growth regime map for liquid-bound granules. AIChE Journal 44 (1998) 1510-1518
4. Iveson S.M., Wauters P.A.L., Forrest S., Litster J.D., Meesters G.M.H., and Scarlett B. Growth regime map for liquid-bound granules: further development and experimental validation. Powder Technology 117 (2001) 83-97
5. Iveson S.M., Litster J.D., Hapgood K., and Ennis B.J. Nucleation, growth and breakage phenomena in agitated wet granulation processes: a review. Powder Technology 117 (2001) 3-39
6. Ax K., Feise H., Sochon R., Hounslow M., and Salman A. Influence of liquid binder dispersion on agglomeration in an intensive mixer. Powder Technology 179 (2008) 190-194
7. Schæfer T. Growth mechanisms in melt agglomeration in high shear mixers. Powder Technology 117 (2001) 68-82
8. K. P. Hapgood, Nucleation and binder dispersion in wet granulation, Ph.D. thesis, University of Queensland (2000).
9. P. A. L. Wauters, Modelling and mechanisms of granulation, Ph.D. thesis, Technische Universiteit Delft (2001).
10. Gatzke E.P., and Doyle F.J. Model predictive control of a granulation system using soft constraints and prioritized control objectives. Powder Technology 121 (2001) 149-158
11. Sanders C.F.W., Hounslow M.J., and Doyle III F.J. Identification of models for control of wet granulation. Powder Technology 188 (2009) 255-263
12. Bardin M., Knight P.C., and Seville J.P.K. On control of particle size distribution in granulation using high-shear mixers. Powder Technology 140 (2004) 169-175
13. Singh J., Balthasar M., Kraft M., and Wagner W. Stochastic modeling of soot particle size and age distributions in laminar premixed flames. Proceedings of the Combustion Institute 30 (2005) 1457-1465
14. Singh J., Patterson R.I.A., Kraft M., and Wang H. Numerical simulation and sensitivity analysis of detailed soot particle size distribution in laminar premixed ethylene flames. Combustion and Flame 145 (2006) 117-127
15. Gerstlauer A., Gahn C., Zhou H., Rauls M., and Schreiber M. Application of population balances in the chemical industry-current status and future needs. Chemical Engineering Science 61 (2006) 205-217
16. Goodson M., and Kraft M. Simulation of coalescence and breakage: an assessment of two stochastic methods suitable for simulating liquid-liquid extraction. Chemical Engineering Science 59 (2004) 3865-3881
17. Kapur P.C., and Fuerstenau D.W. A coalescence model for granulation. Industrial and Engineering Chemistry: Process Design and Development 8 (1969) 56-62
18. Iveson S.M. Limitations of one-dimensional population balance models of wet granulation processes. Powder Technology 124 (2002) 219-229
19. Braumann A., Goodson M.J., Kraft M., and Mort P.R. Modelling and validation of granulation with heterogeneous binder dispersion and chemical reaction. Chemical Engineering Science 62 (2007) 4717-4728
20. Vikhansky A., and Kraft M. A Monte Carlo methods for identification and sensitivity analysis of coagulation processes. Journal of Computational Physics 200 (2004) 50-59
21. Vikhansky A., Kraft M., Simon M., Schmidt S., and Bart H.-J. Droplets population balance in a rotating disc contactor: an inverse problem approach. AIChE Journal 52 (2006) 1441-1450
22. Simmons T., Turton R., and Mort P. An investigation into the effects of time and shear rate on the spreading of liquids in coating and granulation processes. Fifth World Congress on Particle Technology (2006)
23. Laurent B.F.C. Structure of powder flow in a planetary mixer during wet-mass granulation. Chemical Engineering Science 60 (2005) 3805-3816
24. Muguruma Y., Tanaka T., and Tsuji Y. Numerical simulation of particulate flow with liquid bridge between particles (simulation of centrifugal tumbling granulator). Powder Technology 109 (2000) 49-57
25. Nilpawar A.M., Reynolds G.K., Salman A.D., and Hounslow M.J. Surface velocity measurement in a high shear mixer. Chemical Engineering Science 61 (2006) 4172-4178
26. Darelius A., Lennartsson E., Rasmuson A., Björn I.N., and Folestad S. Measurement of the velocity field and frictional properties of wet masses in a high shear mixer. Chemical Engineering Science 62 (2007) 2366-2374
27. Gantt J.A., Cameron I.T., Litster J.D., and Gatzke E.P. Determination of coalescence kernels for high-shear granulation using DEM simulations. Powder Technology 170 (2006) 53-63
28. Middleman S. Modeling Axisymmetric Flow: Dynamics of Films, Jets, and Drops (1995), Academic Press, London
29. Derkaoui N., Said S., Grohens Y., Olier R., and Privat M. PEG400 novel phase description in water. Journal of Colloid and Interface Science 305 (2007) 330-338
30. González-Tello P., Camacho F., and Blázquez G. Density and viscosity of concentrated aqueous solutions of polyethylene glycol. Journal of Chemical and Engineering Data 39 (1994) 611-614
31. Reynolds G.K., Fu J.S., Cheong Y.S., Hounslow M.J., and Salman A.D. Breakage in granulation: a review. Chemical Engineering Science 60 (2005) 3969-3992
32. Liu L.X., Smith R., and Litster J.D. Wet granule breakage in a breakage-only high shear mixer: effect of formulation properties on breakage behaviour. Third International Granulation Workshop (2007)
33. Fu J., Reynolds G.K., Adams M.J., Hounslow M.J., and Salman A.D. An experimental study of the impact breakage of wet granules. Chemical Engineering Science 60 (2005) 4005-4018
34. van den Dries K., de Vegt O.M., Girard V., and Vromans H. Granule breakage phenomena in a high shear mixer; influence of process and formulation variables and consequences on granule homogeneity. Powder Technology 133 (2003) 228-236
35. Samimi A., Ghadiri M., Boerefijn R., Groot A., and Kohlus R. Effect of structural characteristics on impact breakage of agglomerates. Powder Technology 130 (2003) 428-435
36. Vogel L., and Peukert W. Breakage behaviour of different materials-construction of a mastercurve for breakage probability. Powder Technology 129 (2003) 101-110
37. Iveson S.M., Beathe J.A., and Page N.W. The dynamic strength of partially saturated powder compacts: the effect of liquid properties. Powder Technology 127 (2002) 149-161
38. Kristensen H.G., Holm P., and Schaefer T. Mechanical properties of moist agglomerates in relation to granulation mechanisms-part I: deformability of moist, densified agglomerates. Powder Technology 44 (1985) 227-237
39. Talu I., Tardos G.I., and Khan M.I. Computer simulation of wet granulation. Powder Technology 110 (2000) 59-75
40. Vikhansky A., and Kraft M. Two methods for sensitivity analysis of coagulation processes in population balances by a Monte Carlo method. Chemical Engineering Science 61 (2006) 4966-4972
41. Montgomery D.C., and Runger G.C. Applied Statistics and Probability for Engineers. 3rd ed. (2003), John Wiley & Sons, Inc