-
1
-
-
0034674740
-
Low-operating-temperature solid oxide fuel cell in hydrocarbon-air mixtures
-
T. Hibino, A. Hashimoto, T. Inoue, J. Tokuno, S. Yoshida M. Sano Low-Operating-Temperature Solid Oxide Fuel Cell in Hydrocarbon-Air Mixtures Science, 288 [5473] 2031 2033 (2000).
-
(2000)
Science
, vol.288
, Issue.5473
, pp. 2031-2033
-
-
Hibino, T.1
Hashimoto, A.2
Inoue, T.3
Tokuno, J.4
Yoshida, S.5
Sano, M.6
-
2
-
-
0035891321
-
Materials for fuel-cell technologies
-
B. C. H. Steele A. Heinzel Materials for Fuel-Cell Technologies Nature, 414 [6861] 345 352 (2001).
-
(2001)
Nature
, vol.414
, Issue.6861
, pp. 345-352
-
-
Steele, B.C.H.1
Heinzel, A.2
-
3
-
-
18244397684
-
An octane-fueled solid oxide fuel cell
-
Z. L. Zhan S. A. Barnett An Octane-Fueled Solid Oxide Fuel Cell Science, 308 [5723] 844 847 (2005).
-
(2005)
Science
, vol.308
, Issue.5723
, pp. 844-847
-
-
Zhan, Z.L.1
Barnett, S.A.2
-
5
-
-
38349186557
-
Fabrication and characterization of micro tubular sofcs for advanced ceramic reactors
-
T. Suzuki, Y. Funahashi, T. Yamaguchi, Y. Fujishiro M. Awano Fabrication and Characterization of Micro Tubular SOFCs for Advanced Ceramic Reactors J. Alloys Comp., 451 [1/2] 632 635 (2008).
-
(2008)
J. Alloys Comp.
, vol.451
, Issue.1-2
, pp. 632-635
-
-
Suzuki, T.1
Funahashi, Y.2
Yamaguchi, T.3
Fujishiro, Y.4
Awano, M.5
-
6
-
-
52149115381
-
Fabrication of needle-type micro sofcs for micro power devices
-
T. Suzuki, Y. Funahashi, Z. Hasan, T. Yamaguchi, Y. Fujishiro M. Awano Fabrication of Needle-Type Micro SOFCs for Micro Power Devices Electrochem. Commun., 10 [10] 1563 1566 (2008).
-
(2008)
Electrochem. Commun.
, vol.10
, Issue.10
, pp. 1563-1566
-
-
Suzuki, T.1
Funahashi, Y.2
Hasan, Z.3
Yamaguchi, T.4
Fujishiro, Y.5
Awano, M.6
-
7
-
-
33845603063
-
Fabrication and characterization of components for cube shaped micro tubular SOFC bundle
-
Y. Funahashi, T. Shimamori, T. Suzuki, Y. Fujishiro M. Awano Fabrication and Characterization of Components for Cube Shaped Micro Tubular SOFC Bundle J. Power Sources, 163 [2] 731 736 (2007).
-
(2007)
J. Power Sources
, vol.163
, Issue.2
, pp. 731-736
-
-
Funahashi, Y.1
Shimamori, T.2
Suzuki, T.3
Fujishiro, Y.4
Awano, M.5
-
8
-
-
34548254371
-
Anode-supported micro tubular sofcs for advanced ceramic reactor system
-
T. Suzuki, Y. Funahashi, T. Yamaguchi, Y. Fujishiro M. Awano Anode-Supported Micro Tubular SOFCs for Advanced Ceramic Reactor System J. Power Sources, 171 [1] 92 5 (2007).
-
(2007)
J. Power Sources
, vol.171
, Issue.1
, pp. 92-5
-
-
Suzuki, T.1
Funahashi, Y.2
Yamaguchi, T.3
Fujishiro, Y.4
Awano, M.5
-
9
-
-
33845599055
-
Fracture strength of micro-tubular solid oxide fuel cell anode in redox cycling experiments
-
J. Pusz, A. Smirnova, A. Mohammadi N. M. Sammes Fracture Strength of Micro-Tubular Solid Oxide Fuel Cell Anode in Redox Cycling Experiments J. Power Sources, 163 [2] 900 906 (2007).
-
(2007)
J. Power Sources
, vol.163
, Issue.2
, pp. 900-906
-
-
Pusz, J.1
Smirnova, A.2
Mohammadi, A.3
Sammes, N.M.4
-
10
-
-
33748428742
-
Fabrication and characterization of micro tubular sofcs for operation in the intermediate temperature
-
T. Suzuki, T. Yamaguchi, Y. Fujishiro M. Awano Fabrication and Characterization of Micro Tubular SOFCs for Operation in the Intermediate Temperature J. Power Sources, 160 [1] 73 7 (2006).
-
(2006)
J. Power Sources
, vol.160
, Issue.1
, pp. 73-77
-
-
Suzuki, T.1
Yamaguchi, T.2
Fujishiro, Y.3
Awano, M.4
-
11
-
-
36349017251
-
Development of cube-type sofc stacks using anode-supported tubular cells
-
T. Suzuki, Y. Funahashi, T. Yamaguchi, Y. Fujishiro M. Awano Development of Cube-Type SOFC Stacks Using Anode-Supported Tubular Cells J. Power Sources, 175 [1] 68 74 (2008).
-
(2008)
J. Power Sources
, vol.175
, Issue.1
, pp. 68-74
-
-
Suzuki, T.1
Funahashi, Y.2
Yamaguchi, T.3
Fujishiro, Y.4
Awano, M.5
-
12
-
-
33845677634
-
Current collecting efficiency of micro tubular SOFCs
-
T. Suzuki, T. Yamaguchi, Y. Fujishiro M. Awano Current Collecting Efficiency of Micro Tubular SOFCs J. Power Sources, 163 [2] 737 742 (2007).
-
(2007)
J. Power Sources
, vol.163
, Issue.2
, pp. 737-742
-
-
Suzuki, T.1
Yamaguchi, T.2
Fujishiro, Y.3
Awano, M.4
-
13
-
-
23844465686
-
Design and fabrication of a 100 w anode supported micro-tubular SOFC stack
-
N. M. Sammes, Y. Du R. Bove Design and Fabrication of a 100 W Anode Supported Micro-Tubular SOFC Stack J. Power Sources, 145 [2] 428 434 (2005).
-
(2005)
J. Power Sources
, vol.145
, Issue.2
, pp. 428-434
-
-
Sammes, N.M.1
Du, Y.2
Bove, R.3
-
14
-
-
35748969893
-
Fabrication and characterization of micro-tubular cathode-supported SOFC for intermediate temperature operation
-
DOI 10.1016/j.jpowsour.2007.08.101, PII S0378775307017569, Hybrid Electric Vehicles
-
Y. Liu, S. Hashimoto, H. Nishino, K. Takei, M. Mori, T. Suzuki Y. Funahashi Fabrication and Characterization of Micro-Tubular Cathode-Supported SOFC for Intermediate Temperature Operation J. Power Sources, 174 [1] 95 102 (2007). (Pubitemid 350051654)
-
(2007)
Journal of Power Sources
, vol.174
, Issue.1
, pp. 95-102
-
-
Liu, Y.1
Hashimoto, S.-I.2
Nishino, H.3
Takei, K.4
Mori, M.5
Suzuki, T.6
Funahashi, Y.7
-
15
-
-
38849204202
-
Fabrication and evaluation of cathode-supported small scale SOFCs
-
T. Yamaguchi, S. Shimizu, T. Suzuki, Y. Fujishiro M. Awano Fabrication and Evaluation of Cathode-Supported Small Scale SOFCs Mater. Lett., 62 [10/11] 1518 1520 (2008).
-
(2008)
Mater. Lett.
, vol.62
, Issue.10-11
, pp. 1518-1520
-
-
Yamaguchi, T.1
Shimizu, S.2
Suzuki, T.3
Fujishiro, Y.4
Awano, M.5
-
16
-
-
49649083020
-
Fabrication and characterization of high performance cathode supported small-scale SOFC for intermediate temperature operation
-
T. Yamaguchi, S. Shimizu, T. Suzuki, Y. Fujishiro M. Awano Fabrication and Characterization of High Performance Cathode Supported Small-Scale SOFC for Intermediate Temperature Operation Electrochem. Commun., 10 [9] 1381 1383 (2008).
-
(2008)
Electrochem. Commun.
, vol.10
, Issue.9
, pp. 1381-1383
-
-
Yamaguchi, T.1
Shimizu, S.2
Suzuki, T.3
Fujishiro, Y.4
Awano, M.5
-
17
-
-
0036535101
-
Reactions of hydrocarbons in small tubular SOFC
-
G. J. Saunders K. Kendall Reactions of Hydrocarbons in Small Tubular SOFC J. Power Sources, 106 [1/2] 258 263 (2002).
-
(2002)
J. Power Sources
, vol.106
, Issue.1-2
, pp. 258-263
-
-
Saunders, G.J.1
Kendall, K.2
-
18
-
-
34547905031
-
Examination of wet coating and co-sintering technologies for micro-sofcs fabrication
-
T. Yamaguchi, T. Suzuki, S. Shimizu, Y. Fujishiro M. Awano Examination of Wet Coating and Co-Sintering Technologies for Micro-SOFCs Fabrication J. Membr. Sci., 300 [1/2] 45 50 (2007).
-
(2007)
J. Membr. Sci.
, vol.300
, Issue.1-2
, pp. 45-50
-
-
Yamaguchi, T.1
Suzuki, T.2
Shimizu, S.3
Fujishiro, Y.4
Awano, M.5
-
19
-
-
41949136610
-
Thick-film electrolyte (thickness <20μm)-supported solid oxide fuel cells
-
J. H. Joo G. M. Choi Thick-Film Electrolyte (Thickness <20μm)-Supported Solid Oxide Fuel Cells J. Power Sources, 180 [1] 195 198 (2008).
-
(2008)
J. Power Sources
, vol.180
, Issue.1
, pp. 195-198
-
-
Joo, J.H.1
Choi, G.M.2
-
20
-
-
0034323407
-
3-x membranes
-
3-x Membranes Solid State Ionics, 135 [1/4] 637 642 (2000).
-
(2000)
Solid State Ionics
, vol.135
, Issue.1-4
, pp. 637-642
-
-
Luyten, J.1
Buekenhoudt, A.2
Adriansens, W.3
Cooymans, J.4
Weyten, H.5
Servaes, F.6
Leysen, R.7
-
21
-
-
0035973461
-
Preparation and characterization of inorganic hollow fibre membranes
-
X. Tan, S. Liu K. Li Preparation and Characterization of Inorganic Hollow Fibre Membranes J. Membr. Sci., 188 [1] 87 95 (2001).
-
(2001)
J. Membr. Sci.
, vol.188
, Issue.1
, pp. 87-95
-
-
Tan, X.1
Liu, S.2
Li, K.3
-
22
-
-
11144221884
-
Preparation of LSCF ceramic hollow fiber membranes for oxygen production by a Phase-inversion/sintering technique
-
X. Tan, Y. Liu K. Li Preparation of LSCF Ceramic Hollow Fiber Membranes for Oxygen Production by a Phase-Inversion/Sintering Technique Ind. Eng. Chem. Res., 44 [1] 61 6 (2005).
-
(2005)
Ind. Eng. Chem. Res.
, vol.44
, Issue.1
, pp. 61-6
-
-
Tan, X.1
Liu, Y.2
Li, K.3
-
23
-
-
10344262648
-
Oxygen selective ceramic hollow fibre membranes
-
S. Liu G. R. Gavalas Oxygen Selective Ceramic Hollow Fibre Membranes J. Membr. Sci., 246 [1] 103 108 (2005).
-
(2005)
J. Membr. Sci.
, vol.246
, Issue.1
, pp. 103-108
-
-
Liu, S.1
Gavalas, G.R.2
-
24
-
-
31744444888
-
Single-step fabrication of ceramic hollow fibers for oxygen permeation
-
K. Li, X. Tan Y. Liu Single-Step Fabrication of Ceramic Hollow Fibers for Oxygen Permeation J. Membr. Sci., 272 [1/2] 1 5 (2006).
-
(2006)
J. Membr. Sci.
, vol.272
, Issue.1-2
, pp. 1-5
-
-
Li, K.1
Tan, X.2
Liu, Y.3
-
25
-
-
33644746078
-
Yttria stabilized zirconia hollow fiber membranes
-
L. Liu, X. Tan S. Liu Yttria Stabilized Zirconia Hollow Fiber Membranes J. Am. Ceram. Soc., 89 [3] 1156 1159 (2006).
-
(2006)
J. Am. Ceram. Soc.
, vol.89
, Issue.3
, pp. 1156-1159
-
-
Liu, L.1
Tan, X.2
Liu, S.3
-
26
-
-
33749460833
-
3-δ ceramic hollow fiber membranes for air separation
-
3-δ Ceramic Hollow Fiber Membranes for Air Separation AIChE J., 52, 3452 3461 (2006).
-
(2006)
AIChE J.
, vol.52
, pp. 3452-3461
-
-
Liu, S.1
Tan, X.2
Shao, Z.3
Costa, J.C.D.4
-
27
-
-
46749136344
-
A phase inversion/sintering process to fabricate nickel/yttria-stabilized zirconia hollow fibers as the anode support for micro-tubular solid oxide fuel cells
-
N. Yang, X. Tan Z. Ma A Phase Inversion/Sintering Process to Fabricate Nickel/Yttria-Stabilized Zirconia Hollow Fibers as the Anode Support for Micro-Tubular Solid Oxide Fuel Cells J. Power Sources, 183 [1] 14 9 (2008).
-
(2008)
J. Power Sources
, vol.183
, Issue.1
, pp. 14-9
-
-
Yang, N.1
Tan, X.2
Ma, Z.3
-
28
-
-
49749094693
-
Preparation of electrolyte membranes for micro tubular solid oxide fuel cells
-
X. Tan, W. Yin, B. Meng, X. Meng, N. Yang Z. Ma Preparation of Electrolyte Membranes for Micro Tubular Solid Oxide Fuel Cells Sci. China, B Chem., 51 [9] 808 812 (2008).
-
(2008)
Sci. China, B Chem.
, vol.51
, Issue.9
, pp. 808-812
-
-
Tan, X.1
Yin, W.2
Meng, B.3
Meng, X.4
Yang, N.5
Ma, Z.6
-
29
-
-
29844446128
-
1.9 powder synthesized by carbonate coprecipitation: Sintering and electrical characteristics
-
1.9 Powder Synthesized by Carbonate Coprecipitation: Sintering and Electrical Characteristics Acta Mater., 54 [3] 721 727 (2006).
-
(2006)
Acta Mater.
, vol.54
, Issue.3
, pp. 721-727
-
-
Li, H.1
Xia, C.2
Zhu, M.3
Zhou, Z.4
Meng, G.5
-
30
-
-
61449104794
-
1.9 ceramics for IT-SOFC electrolytes by urea-combustion technique
-
1.9 Ceramics for IT-SOFC Electrolytes by Urea-Combustion Technique Ceramics Intern, 35 [4] 1335 1343 (2009).
-
(2009)
Ceramics Intern
, vol.35
, Issue.4
, pp. 1335-1343
-
-
Chen, M.1
Kim, B.H.2
Xu, Q.3
Ahn, B.K.4
Kang, W.J.5
Huang, D.6
-
31
-
-
33748044330
-
1.9 films fabricated by slurry spin coating
-
DOI 10.1016/j.jpowsour.2005.11.057, PII S0378775305015466
-
1.9 Films Fabricated by Slurry Spin Coating J. Power Sources, 159 [1] 637 640 (2006). (Pubitemid 44301582)
-
(2006)
Journal of Power Sources
, vol.159
, Issue.1 SPEC. ISS.
, pp. 637-640
-
-
Ai, N.1
Lu, Z.2
Chen, K.3
Huang, X.4
Wei, B.5
Zhang, Y.6
Li, S.7
Xin, X.8
Sha, X.9
Su, W.10
-
32
-
-
33846828765
-
2-δ electrolyte synthesized by a polymer assisted combustion method
-
2-δ Electrolyte Synthesized by a Polymer Assisted Combustion Method J. Power Sources, 165 [1] 134 137 (2007).
-
(2007)
J. Power Sources
, vol.165
, Issue.1
, pp. 134-137
-
-
Jiang, C.1
Ma, J.2
Liu, X.3
Meng, G.4
-
33
-
-
50149090694
-
1.9 electrolyte prepared by a suspension spray
-
1.9 Electrolyte Prepared by a Suspension Spray J. Alloys Compounds, 465 [1/2] 285 290 (2008).
-
(2008)
J. Alloys Compounds
, vol.465
, Issue.1-2
, pp. 285-290
-
-
Lin, B.1
Sun, W.2
Xie, K.3
Dong, Y.4
Dong, D.5
Liu, X.6
Gao, J.7
Meng, G.8
-
34
-
-
33744510580
-
Necessity of verification of leakage currents using sm doped ceria electrolytes in SOFCs
-
T. Miyashita Necessity of Verification of Leakage Currents Using Sm Doped Ceria Electrolytes in SOFCs J. Mater. Sci., 41, 3183 3184 (2006).
-
(2006)
J. Mater. Sci.
, vol.41
, pp. 3183-3184
-
-
Miyashita, T.1
-
35
-
-
24944495881
-
Mixed conducting ceramic hollow fiber membranes for air separation
-
X. Tan, Y. Liu K. Li Mixed Conducting Ceramic Hollow Fiber Membranes for Air Separation AIChE J., 51 [7] 1991 2000 (2005).
-
(2005)
AIChE J.
, vol.51
, Issue.7
, pp. 1991-2000
-
-
Tan, X.1
Liu, Y.2
Li, K.3
-
36
-
-
0028989294
-
Study on the effect of spinning conditions and surface treatment on the geometry and performance of polymeric hollow-fibre membranes
-
S. Mok, D. J. Worsfold, A. E. Fouda, T. Matsuura, S. Wang K. Chan Study on the Effect of Spinning Conditions and Surface Treatment on the Geometry and Performance of Polymeric Hollow-Fibre Membranes J. Membr. Sci., 100 [3] 183 192 (1995).
-
(1995)
J. Membr. Sci.
, vol.100
, Issue.3
, pp. 183-192
-
-
Mok, S.1
Worsfold, D.J.2
Fouda, A.E.3
Matsuura, T.4
Wang, S.5
Chan, K.6
-
37
-
-
0029490877
-
Pore formation mechanism of membranes from phase inversion process
-
T.-H. Young L.-W. Chen Pore Formation Mechanism of Membranes from Phase Inversion Process Desalination, 103 [3] 233 247 (1995).
-
(1995)
Desalination
, vol.103
, Issue.3
, pp. 233-247
-
-
Young, T.-H.1
Chen, L.-W.2
-
38
-
-
64549130875
-
Highly asymmetric YSZ hollow fibre membranes
-
W. Yin, B. Meng, X. Meng X. Tan Highly Asymmetric YSZ Hollow Fibre Membranes J. Alloys Compd., 476 [1/2] 566 570 (2009).
-
(2009)
J. Alloys Compd.
, vol.476
, Issue.1-2
, pp. 566-570
-
-
Yin, W.1
Meng, B.2
Meng, X.3
Tan, X.4
|