Pore structure changes of blended cement pastes containing fly ash, rice husk ash, and palm oil fuel ash caused by carbonation

Journal of Materials in Civil Engineering

Volumn 21, Issue 11, 2009, Pages 666-671

  Chindaprasirt, Prinya ^a   Rukzon, Sumrerng ^b  

^a KHON KAEN UNIVERSITY   (Thailand)

^b RAJAMANGALA UNIVERSITY OF TECHNOLOGY PHRA NAKHON   (Thailand)

Author keywords

Carbonation; Cement; Fly ash; Microstructures; Portland cement

Indexed keywords

BLENDED CEMENT PASTES; CALCIUM SILICATE HYDRATE; CEMENT PASTE; FUEL ASH; INFILLING; LARGE PORES; ORDINARY PORTLAND CEMENT; PALM OIL; RELATIVE HUMIDITIES; RICE HUSK ASH; TOTAL POROSITY;

ATMOSPHERIC HUMIDITY; CALCIUM; CARBONATION; CEMENT MANUFACTURE; FLY ASH; HYDRATES; OIL WELL CEMENTING; POLYACRYLONITRILES; PORE SIZE; PORE STRUCTURE; PORTLAND CEMENT; SILICATE MINERALS; SIZE DISTRIBUTION; SPECIFIC SURFACE AREA; VEGETABLE OILS;

POZZOLAN;

CEMENT; FLY ASH; MICROSTRUCTURE; POROSITY; SIZE DISTRIBUTION; TESTING METHOD;

EID: 70350375970     PISSN: 08991561     EISSN: None     Source Type: Journal    
DOI: 10.1061/(ASCE)0899-1561(2009)21:11(666)     Document Type: Article

References (23)

1. ASTM C109. (2001). "Standard test method for compressive strength of hydraulic cement mortars [using 2-in or (50 mm) cube specimens]." ASTM C109M-99, 04.01, 83-88
2. Chindaprasirt, P., Jaturapitakkul, C., and Sinsiri, T. (2005). "Effect of fly ash fineness on compressive strength and pore size of blended cement paste." Cem. Concr. Compos. CCOCEG0958-9465, 27(4), 425-428. 10.1016/j.cemconcomp.2004.07.003
3. Chindaprasirt, P., Jaturapitakkul, C., and Sinsiri, T. (2007). "Efffect of fly ash fineness on microstructure of blended cement paste." Constr. Build. Mater. CBVME20950-0618, 21, 1534-1541. 10.1016/j.conbuildmat.2005.12.024
4. Chindaprasirt, P., and Rukzon, S. (2007). "Strength, porosity and corrosion resistance of ternary blend Portland cement, rice husk ash and fly ash mortar." Constr. Build. Mater. CBVME20950-0618, 22(8), 1601-1606. 10.1016/j.conbuildmat.2007.06.010
5. Chindaprasirt, P., Rukzon, S., and Sirivivatnanon, V. (2008). "Resistance to chloride penetration of blended Portland cement mortar containing palm oil fuel ash, rice husk ash and fly ash." Constr. Build. Mater. CBVME20950-0618, 22, 932-938. 10.1016/ j.conbuildmat.2006.12.001
6. Cook, D. J., and Suwanvitaya, P. (1983). "Properties and behavior of lime-rice husk ash cements." American Concrete Institute, 2, 831-845.
7. Della, V. P., Kuhn, L., and Hotza, D. (2002). "Rice husk ash as an alternative source for active silica production." Mater. Lett. MLETDJ0167-577X, 57, 818-821. 10.1016/S0167-577X(02)00879-0
8. Galle, C. (2001). "Effect of drying on cement-based materials pore structure as identified by mercury intrusion porosimetry: A comparative study between oven, vacuum, and freeze-drying." Cem. Concr. Res. CCNRAI0008-8846, 31, 1467-1477. 10.1016/S0008-8846(01)00594-4
9. Isaia, G. C., Gastaldini, A. L. G., and Moraes, R. (2003). "Physical and pozzolanic action of mineral additions on the mechanical strength of high-performance concrete." Cem. Concr. Compos. CCOCEG0958-9465, 25, 69-76. 10.1016/S0958-9465(01)00057-9
10. Johannesson, B., and Utgenannt, P. (2001). "Microstructural changes caused by carbonation of cement mortar." Cem. Concr. Res. CCNRAI0008-8846, 31, 925-931. 10.1016/S0008-8846(01)00498-7
11. Konecny, L., and Naqui, S. J. (1993). "The effect of different drying techniques on the pore size distribution of blended cement mortars." Cem. Concr. Res. CCNRAI0008-8846, 23, 1223-1228. 10.1016/ 0008-8846(93)90183-A
12. Kumar, R., and Bhattacharjee, B. (2003). "Porosity, pore size distribution and in situ strength of concrete." Cem. Concr. Res.CCNRAI0008-8846, 33, 155-164.10.1016/S0008-8846(02)00942-0
13. Neville, A. M. (1995). Properties of concrete, 4th and final Ed.,Longman's, London.
14. Ngala, V. N., and Page, C. L. (1997). "Effects of carbonation on pore structure and diffusional properties of hydrated cement paste." Cem. Concr. Res. CCNRAI0008-8846, 27(7), 995-1007. 10.1016/ S0008-8846(97)00102-6
15. Payá, J., Monzó, J., Borrachero, M. V., Peris-Mora, E., and González-López, E. (1996). "Mechanical treatment of fly ashes. Part II: Particle morphologies in ground fly ashes (GFA) and workability of GFA-cement mortars." Cem. Concr. Res. CCNRAI0008-8846, 26(2), 225-235. 10.1016/0008-8846(95)00212-X
16. Poon, C. S., Wong, Y. L., and Lam, L. (1997). "The influence of different curing conditions on the pore structure and related properties of fly ash cement pastes and mortars." Constr. Build. Mater. CBVME20950-0618, 11, 383-393. 10.1016/S0950-0618(97)00061-5
17. Rukzon, S., and Chindaprasirt, P. (2008a). "Development of classified fly ash as a pozzolanic material." J. Appl. Sci. JASODW1812-5654, 8(6), 1097-1102. 10.3923/jas.2008.1097.1102
18. Rukzon, S., and Chindaprasirt, P. (2008b). "Mathematical model of strength and porosity of ternary Portland rice husk ash and fly ash cement mortar." Comput. Concr. ZZZZZZ1598-8198, 5(1), 75-88.
19. Sulapha, P., Wong, S. F., Wee, T. H., and Swaddiwudhipong, S. (2003). "Carbonation of concrete containing mineral admixtures." J. Mater. Civ. Eng. JMCEE70899-1561, 15, 134. 10.1061/ (ASCE)0899-1561(2003)15:2(134)
20. Tay, J. H. (1990). "Ash from oil-palm waste as a concrete material." J. Mater. Civ. Eng. JMCEE70899-1561, 2(2), 94-105. 10.1061/(ASCE)0899-1561(1990)2:2(94)
21. Washburn, E. W. (1921). "Note on method of determining the distribution of pore size in porous materials." Proc. Natl. Acad. Sci. U.S.A. PNASA60027-8424, 7, 115-116. 10.1073/pnas.7.4.115
22. Xu, A., and Sarkar, S. L. (1994). "Microstructural Development in High-Volume Fly-Ash Cement System." J. Mater. Civ. Eng. JMCEE70899-1561, 6(1), 117-136. 10.1061/(ASCE)0899-1561(1994)6:1(117)
23. Zhang, X., Wu, K., and Yan, A. (2004). "Carbonation property of hardened binder pastes containing super-pulverized blast-furnace slag." Cem. Concr. Compos. CCOCEG0958-9465, 26, 371-374. 10.1016/ S0958-9465(03)00021-0