Chapter 2 Flow injection techniques

Comprehensive Analytical Chemistry

Volumn 34, Issue , 2000, Pages 213-346

  Beauchemin, Diane ^a  

^a NONE

Author keywords

[No Author keywords available]

Indexed keywords

EID: 70350322479     PISSN: 0166526X     EISSN: None     Source Type: Book Series    
DOI: 10.1016/S0166-526X(00)34004-1     Document Type: Review

References (330)

1. Ruzicka J., and Hansen E.H. Flow injection analyses Part I. A new concept of fast continuous flow analysis. Anal. Chim. Acta 78 (1975) 145
2. Horvai G., and Pungor E. Theoretical backgrounds of flow analysis. CRC Crit. Rev. Anal. Chem. 17 (1987) 231
3. Ruzicka J., and Hansen E.H. Flow Injection Analysis (1981), John Wiley & Sons Inc., New York
4. McLeod C.W. Flow injection techniques in inductively coupled plasma spectrometry. J. Anal. At. Spectrom. 2 (1987) 549
5. Ruzicka J., and Hansen E.H. Flow injection analyses Part X. Theory, Techniques and Trends. Anal. Chim. Acta 99 (1978) 37
6. Fang Z. Flow Injection Separation and Preconcentration (1993), VCH Publishers, Inc., New York
7. In: Burguera J.L. (Ed). Flow Injection Atomic Spectroscopy (1989), Marcel Dekker, Inc., New York
8. van der Linden W.E. In: Burguera J.L. (Ed). Flow Injection Atomic Spectroscopy (1989), Marcel Dekker, Inc., New York
9. Trojanowicz M. Flow Injection Analysis Instrumentation and Applications (2000), World Scientific Publishing Co. Inc., New York
10. Tyson J.F. Flow injection atomic spectrometry. Spectrochim. Acta. Rev. 14 (1991) 169
11. Tyson J.F. Flow injection analysis techniques for atomic-absorption spectrometry: a review. Analyst 110 (1985) 419
12. Browner R.F., and Boorn A.W. Sample introduction techniques for atomic spectroscopy. Anal. Chem. 56 (1984) 875A
13. Christian G.D., and Ruzicka J. Flow injection analysis: a novel tool for plasma spectroscopy. Spectrochim. Acta 42B (1987) 157
14. Ruzicka J. Flow injection analysis-A survey of its potential as solution handling and data gathering technique in chemical research and industry. Fresenius Z. Anal. Chem. 329 (1988) 653
15. Hansen E.H. Exploitation of gradient techniques in flow injection analysis, Fresenius 2. Anal. Chem. 329 (1988) 656
16. Karlberg B. Flow injection extraction in theory and practice. Fresenius Z. Anal. Chem. 329 (1988) 660
17. Tyson J.F. Flow injection calibration techniques. Fresenius Z. Anal. Chem. 329 (1988) 663
18. Frenzel W. Potential of modified reverse flow injection analysis for continuous monitoring and process control. Fresenius Z. Anal. Chem. 329 (1988) 668
19. Tyson J.F. Atomic spectrometry detectors for flow-injection analysis. Anal. Chim. Acta 234 (1990) 3
20. Ruzicka J., and Christian G.D. Flow Injection Analysis and Chromatography: Twins or siblings?. Analyst 115 (1990) 475
21. Valcárcel M., and Luque de Castro M.D. Flow injection analysis: A useful alternative for solving analytical problems. Fresenius J. Anal. Chem. 337 (1990) 2877
22. Beauchemin D. Inductively coupled plasma mass spectrometry in hyphenation: a multielemental analysis technique with almost unlimited potential. Trends Anal. Chem. 10 (1991) 71
23. Denoyer E.R., and Stroh A. Expanding ICP-MS capabilities using flow injection. Am. Lab. 24 3 (1992) 74
24. Tyson J. Flow-injection techniques for analytical atomic spectrometry. Spectroscopy 7 (1992) 14
25. Giné M.F., Reis B.F., Krug F.J., Jacintho A.O., Bergamin Filho H., and Zagatto E.A.G. Flow injection plasma spectrometry. ICP Inf. Newslett. 20 (1994) 413
26. Burguera J.L., and Burguera M. Liquid sample introduction devices in flow injection atomic spectroscopy. J. Anal. At. Spectrom. 10 (1995) 473
27. Luque de Castro M.D., and Tena M.T. Hyphenated flow injection systems and high discrimination instruments. Talanta 42 (1995) 151
28. Tyson J.F. Flow injection techniques in atomic spectroscopy. Anal. Proc. 29 (1992) 436
29. Fang Z., Xu S., and Tao G. Developments and trends in flow injection atomic absorption spectrometry. J. Anal. At. Spectrom. 11 (1996) 1
30. Atienza J., Herrero M.A., Maquieira A., and Puchades R. Flow injection analysis of seawater. Part II. Cationic species. CRC Crit. Rev. Anal. Chem. 23 (1992) 1
31. Andrew K.N., Blundell N.J., Price D., and Worsfold P.J. Flow injection techniques for water monitoring. Anal. Chem. 66 (1994) 917A
32. Hansen E.H. Flow-injection analysis: leaving its teen-years and maturing. A personal reminiscence of its conception and early development. Anal. Chim. Acta 308 (1995) 3
33. Slavin W. A Comparison of Atomic Spectroscopic Analytical Techniques. Spectroscopy 6 (1991) 16
34. Craig J.M., and Beauchemin D. Characterization of inductively coupled plasma mass spectrometry with segmented-flow injection. Analyst 119 (1994) 1677
35. Fogg A.G., and Davies A.E. Reverse flow injection or reagent injection? Normal flow injection, reverse flow injection and single-boundary measurements. Analyst 117 (1992) 1055
36. Stone D.C., and Tyson J.F. Models for dispersion in flow injection analysis, Part 1. Basic requirements and study of factors affecting dispersion. Analyst 112 (1987) 515
37. Smit H.C., and Scheeren P.J.H. Characterization of responses to injection of microliter samples and to peak-shaped input signals for inductively-coupled plasma/atomic emission spectrometry. Anal. Chim. Acta 215 (1988) 143
38. Spence D.M., and Crouch S.R. Factors affecting zone variance in a capillary flow injection system. Anal. Chem. 69 (1997) 165
39. Stone D.C., and Tyson J.F. Models for dispersion in flow injection analysis, Part 2. Two tanks in parallel model. Analyst 114 (1989) 1453
40. Dean J.R., Ebdon L., Crews H.M., and Massey R.C. Characteristics of flow injection inductively coupled plasma mass spectrometry for trace metal analysis. J. Anal. At. Spectrom. 3 (1988) 349
41. Manzoori J.L., Miyazaki A., and Tao H. Rapid differential flow injection of phosphorus compounds in wastewater by sequential spectrophotometry and inductively coupled plasma atomic emission spectrometry using a vacuum ultraviolet emission line. Analyst 115 (1990) 1055
42. Li Y., and Ma H. Two trends of sample dispersion variation with carrier flow rate in a single flow-injection manifold. Talanta 42 (1995) 2033
43. Israel Y., and Barnes R.M. Flow injection dispersion characteristics with inductively coupled plasma atomic emission spectrometry. Part 1. Methodology. Analyst 119 (1994) 1011
44. Jacintho A.O., Zagatto E.A.G., Bergamin F. H., Krug F.J., Reis B.F., Bruns R.E., and Kowalski B.R. Flow injection systems with inductively-coupled plasma atomic emission spectrometry, Part 1. Fundamental considerations. Anal. Chim. Acta 130 (1981) 243
45. Brown M.W., and Ruzicka J. Parameters affecting sensitivity and precision in the combination of flow injection analysis with flame atomicabsorption spectrophotometry. Analyst 109 (1984) 1091
46. Tyson J.F., Adeeyinwo C.E., Appleton J.M.H., Bysouth S.R., Idris A.B., and Sarkissian L.L. Flow injection techniques of method development for flame atomic-absorption spectrometry. Analyst 110 (1985) 487
47. Tyson J.F., and Idris A.B. Flow injection sample introduction for atomicabsorption spectrometry: applications of a simplified model for dispersion. Analyst 106 (1981) 1125
48. Klinkenberg H., Beeren T., and Van Borm W. Multielement analysis using flow injection inductively coupled plasma mass spectrometry: analytical aspects of multielement determinations in highly concentrated solutions of phosphoric acid, sodium phosphate and sodium nitrate. Spectrochim. Acta 49B (1994) 171
49. Selavka C.M., Jiao K.-S., and Krull I.S. Construction and comparison of open tubular reactors for postcolumn reaction detection in liquid chromatography. Anal. Chem. 59 (1987) 2221
50. Israel Y., and Barnes R.M. Flow injection dispersion characteristics with inductively coupled plasma atomic emission spectrometry. 2. Influence of flow modes and manifold configuration. Anal. Chem. 66 (1994) 3937
51. Simonsen K.W., Nielsen B., Jensen A., and Andersen J.R. Direct microcomputer controlled determination of zinc in human serum by flow injection atomic absorption spectrometry. J. Anal. At. Spectrom. 1 (1986) 453
52. Weeks D.A., and Johnson K.S. Solenoid pumps for flow injection analysis. Anal. Chem. 68 (1996) 2717
53. Fang Z., Welz B., and Sperling M. Expansion of dynamic range of flame atomic absorption spectrometry by an efficient flow injection dilution system based on dispersion of microliter-volume samples. Anal. Chem. 65 (1993) 1682
54. Bessoth F.G., deMello A.J., and Manz A. Microstructure for efficient continuous flow mixing. Anal. Commun. 36 (1999) 213
55. Falkner K.K., and Edmond J.M. Determination of gold at femtomolar levels in natural waters by flow injection inductively coupled plasma quadrupole mass spectrometry. Anal. Chem. 62 (1990) 1477
56. Wu M., Ensman R., and Hieftje G.M. Simple, inexpensive system for controlled-dispersion flow analysis in inductively coupled plasma spectrometry. Appl. Spectrosc. 48 (1994) 448
57. Ivaska A., and Ruzicka J. From flow injection to sequential injection: comparison of methodologies and selection of liquid drives. Analyst 118 (1993) 885
58. Ruzicka J., and Scampavia L. From flow injection to bead injection. Anal. Chem. 71 (1999) 257A
59. Ruzicka R. Flow injection-renewable surface techniques. Anal. Chim. Acta 308 (1995) 14
60. Wu M., Madrid Y., Auxier J.A., and Hieftje G.M. New spray chamber for use in flow-injection plasma emission spectrometry. Anal. Chim. Acta 286 (1994) 155
61. Hettipathirana T.D., and Davey D.E. Analytical performance in flow injection-simultaneous multielement-inductively coupled plasma-optical emission spectrometry employing a cyclonic spray chamber. Appl. Spectrosc. 50 (1996) 1015
62. Liu J., Huang B., and Zeng X. Donut-shaped spray chamber for inductively coupled plasma spectrometry. Spectrochim. Acta 53B (1998) 1469
63. Parent M., Vanhoe H., Moens L., and Dams R. Evaluation of a flow injection system combined with an inductively coupled plasma mass spectrometer with thermospray nebulization for the determination of trace levels of platinum. Anal. Chim. Acta 320 (1996) 1
64. Houk R.S., Shum S.C.K., and Wiederin D.R. Frontiers in elemental analysis by mass spectrometry. Anal. Chim. Acta 250 (1991) 61
65. Pergantis S.A., Heithmar E.M., and Hinners T.A. Microscale flow injection and microbore high-performance liquid chromatography coupled with inductively coupled plasma mass spectrometry via a high-efficiency nebulizer. Anal. Chem. 67 (1995) 4530
66. Wankarn S., and Pergantis S.A. Determination of arsenic in organic solvents and wines using microscale flow injection inductively coupled plasma mass spectrometry. J. Anal. At. Spectrom. 14 (1999) 657
67. Fitzgerald N., Tyson J.F., and Leighty D.A. Reduction of water loading effects in inductively coupled plasma mass spectrometry by a Nafion membrane dryer device. J. Anal. At. Spectrom. 13 (1998) 13
68. Denoyer E.R., Lu Q., Stroh A., and Jordan P. Rapid microsampling with flow injection ICP-mass spectrometry. FIAS Application Report (1993), Perkin Elmer SCIEX, New Jersey
69. Richner P. Detection limits versus matrix effects: Analysis of solutions with high amounts of dissolved solids by flow injection inductively coupled plasma mass spectrometry. J. Anal. At. Spectrom. 8 (1993) 927
70. Denoyer E.R. An evaluation of spectral integration in ICP-MS. At. Spectrosc. 13 (1992) 93
71. Denoyer E.R. Optimization of transient signal measurements in ICP-MS. At. Spectrosc. 15 (1994) 7
72. Vanhaecke F., Moens L., Dams R., Allen L., and Georgitis S. Evaluation of the isotope ratio performance of an axial time-of-flight ICP mass spectrometer. Anal. Chem. 71 (1999) 3297
73. Doerffel K., Dost J., and Müller H. Evaluation of noisy FIAS using the cross-covariance function. Fresenius J. Anal. Chem. 348 (1994) 255
74. Lee O., Wade A.P., and Dumont G.A. Generalized Fourier smoothing of flow injection analysis data. Anal. Chem. 66 (1994) 4507
75. Roussin J.A., Li J., and Pardue H.L. Evaluation of a predictive steady-state flow-injection method adapted to an open flow tube with a tracer. Anal. Chim. Acta 303 (1995) 199
76. Ambrose A.J., Ebdon L., Foulkes M.E., and Jones P. Direct atomic spectrometric analysis by slurry atomisation. Part. 8. Flow injection inductively coupled plasma atomic emission spectrometry. J. Anal. At. Spectrom. 4 (1989) 219
77. Brotherton T.J., Pfannerstill P.E., Creed J.T., Heitkemper D.T., Caruso J.A., and Pratsinis S.E. Evaluation of three low-volume interfaces for organic solvent introduction to the inductively coupled plasma-application to flow injection. J. Anal. At. Spectrom. 4 (1989) 341
78. Vijayalakshmi S., Prabhu R.K., Mahalingam T.R., and Mathews C.K. Determination of trace metals in uranium oxide by inductively coupled plasma mass spectrometry combined with on-line solvent extraction. J. Anal. At. Spectrom. 7 (1992) 565
79. Al-Swaidan H.M., Lacy N., and Christian G.D. Flow Injection analysis-inductively coupled plasma/mass spectrometry: study of interelement effects. Anal. Lett. 22 (1989) 2653
80. Wang J., Shen W.-L., Sheppard B.S., Evans E.H., Caruso J.A., and Fricke F.L. Effect of ion-lens tuning and flow injection on non-spectroscopic matrix interferences in inductively coupled plasma mass spectrometry. J. Anal. At. Spectrom. 5 (1990) 445
81. Coedo A.G., and Dorado M.T. Use of flow injection inductively coupled plasma-mass spectrometry for the determination of niobium, vanadium, and titanium in microalloyed steels. Appl. Spectrosc. 49 (1995) 115
82. Hill S.J., Hartley J., and Ebdon L. Determination of impurities in organometallic compounds dissolved in diethyl ether by flow injection inductively coupled plasma mass spectrometry. J. Anal. At. Spectrom. 7 (1992) 895
83. Matousek de Abel de la Cruz A., Burguera J.L., Burguera M., and Rivas C. Factorial design for the response exploration of a flow injection system. Talanta 42 (1995) 701
84. Wade A.P., Shiundu P.M., and Wentzell P.D. Automated exploration and exploitation of flow-injection response surfaces. Anal. Chim. Acta 237 (1990) 361
85. Araújo A., Lima J.L.F.C., Gracia J., Poch M., Alonso J., Bartrolí J., and del Valle M. An integrated design strategy for flow-injection analysis based on the coupling of mathematical modelling and optimization algorithms. Anal. Chim. Acta 310 (1995) 289
86. Dressler V.L., Pozebon D., and Curtius A.J. Introduction of alcohols in inductively coupled plasma mass spectrometry by a flow injection system. Anal. Chim. Acta 379 (1999) 175
87. Hill S.J., Hartley J., and Ebdon L. Determination of trace metals in volatile organic solvents using inductively coupled plasma atomic emission spectrometry and inductively coupled plasma mass spectrometry. J. Anal. At. Spectrom. 7 (1992) 23
88. 88 P. Bruckner, U. Vollkopf and E. Denoyer, The Elan 40-MHz, free-running RF generator: state-of-the-art engineering for ICP-MS, Technical summary TSMS-20.
89. Beauchemin D., Siu K.W.M., and Berman S.S. Determination of organomercury in biological reference materials by inductively coupled plasma mass spectrometry using flow injection analysis. Anal. Chem. 60 (1988) 2587
90. van de Weijer P., Vullings P.J.M.G., Baeten W.L.M., and de Laat W.J.M. Determination of uranium and thorium in aluminium with flow injection and laser ablation inductively coupled plasma mass spectrometry. J. Anal. At. Spectrom. 6 (1991) 609
91. Cambridge. Anderson S.T.G., Taylor M.J.C., and Williams S.J.S. Application of flow injection analysis to ICP-MS. In: Holland G., and Eaton A.N. (Eds). Applications of Plasma Source Mass Spectrometry II. Special Publication No. 124 of the Royal Society of Chemistry (1993) 72-82
92. Lawrence K.E., Rice G.W., and Fassel V.A. Direct liquid sample introduction for flow injection analysis and liquid chromatography with inductively coupled argon plasma spectrometric detection. Anal. Chem. 56 (1984) 289
93. LaFreniere K.E., Rice G.W., and Fassel V.A. Flow injection analysis with inductively coupled plasma-atomic emission spectroscopy: critical comparison of conventional pneumatic, ultrasonic and direct injection nebulization. Spectrochim. Acta 40B (1985) 1495
94. Thompson J.J., and Houk R.S. Inductively coupled plasma mass spectrometric detection for multielement flow injection analysis and elemental speciation by reversed-phase liquid chromatography. Anal. Chem. 58 (1986) 2541
95. Powell M.J., Quan E.S.K., Boomer D.W., and Wiederin D.R. Inductively coupled plasma mass spectrometry with direct injection nebulization for mercury analysis of drinking water. Anal. Chem. 64 (1992) 2253
96. Wang J., Evans E.H., and Caruso J.A. Minimization of non-spectroscopic matrix interferences for the determination of trace elements in fusion samples by flow injection inductively coupled plasma mass spectrometry. J. Anal. At. Spectrom. 6 (1991) 605
97. Coedo A.G., and Dorado M.T. Application of flow injection inductively coupled plasma mass spectrometry to the simultaneous determination of arsenic, antimony, tin, bismuth, selenium and tellurium in steels. J. Anal. At. Spectrom. 9 (1994) 1111
98. Hutton R.C., and Eaton A.N. Analysis of solutions containing high levels of dissolved solids by inductively coupled plasma mass spectrometry. J. Anal. At. Spectrom. 3 (1988) 547
99. Eaton A.N., Hutton R.C., and Holland J.G. Application of flow injection sample introduction to inductively coupled plasma-mass spectrometry for geochemical analysis. Chem. Geol. 95 (1992) 63
100. Stroh A., Voellkopf U., and Denoyer E.R. Analysis of samples containing large amounts of dissolved solids using microsampling flow injection inductively coupled plasma mass spectrometry. J. Anal. At. Spectrom. 7 (1992) 1201
101. Brenner I.B., Liezers M., Godfrey J., Nelms S., and Cantle J. Analytical characteristics of a high efficiency ion transmission interface (S mode) inductively coupled plasma mass spectrometer for trace element determinations in geological and environmental materials. Spectrochim. Acta 54B (1999) 991
102. Coedo A.G., Dorado T., Fernandez B.J., and Alguacil F.J. Isotope dilution analysis for flow injection ICPMS determination of microgram per gram levels of boron in iron and steel after matrix removal. Anal. Chem. 68 (1996) 991
103. Stroh A., and Völlkopf U. Analysis of difficult samples by flow injection inductively coupled plasma mass spectrometry. Anal. Proc. 29 (1992) 274
104. Yoshinaga J., Nakama A., and Takata K. Determination of total tin in sediment reference materials by isotope dilution inductively coupled plasma mass spectrometry after alkali fusion. Analyst 124 (1999) 257
105. Peng Z., Klinkenberg H., Beeren T., and Van Borm W. Determination of germanium, palladium and platinum in highly concentrated solutions of phosphoric acid and ammonium nitrate by flow injection inductively coupled plasma mass spectrometry. Spectrochim. Acta 46B (1991) 1051
106. Makishima A., Nakamura E., and Nakano T. Determination of boron in silicate samples by direct aspiration of sample HF solutions into ICPMS. Anal. Chem. 69 (1997) 3754
107. Persaud A.T., Beauchemin D., Jamieson H.E., and McLean R.J.C. Partial leaching as an aid to slurry nebulization for the analysis of soils by ICP-MS with flow injection and mixed-gas plasmas. Can. J. Chem. 77 (1999) 409
108. Williams J.G., Gray A.L., Norman P., and Ebdon L. Feasibility of solid sample introduction by slurry nebulisation for inductively coupled plasma mass spectrometry. J. Anal. At. Spectrom. 2 (1987) 469
109. Hulsman M., Bos M., and van der Linden W.E. Dispersion behaviour of solid particles in flow-injection analysis. Anal. Chim. Acta 346 (1997) 351
110. Becker J.S., Soman R.S., Sutton K.L., Caruso J.A., and Dietze H.-J. Determination of long-lived radionuclides by inductively coupled plasma quadrupole mass spectrometry using different nebulizers. J. Anal. At. Spectrom. 14 (1999) 933
111. Dressler V.L., Pozebon D., and Curtius A.J. Determination of heavy metals by inductively coupled plasma mass spectrometry after on-line separation and preconcentration. Spectrochim. Acta 53B (1998) 1527
112. Houk R.S., and Thompson J.J. Trace Metal Isotopic Analysis of Microliter Solution Volumes by Inductively Coupled Plasma Mass Spectrometry. Biomed. Mass Spectrom. 10 (1983) 107
113. Reis B.F., Arruda M.A.Z., Ziggatto E.A.G., and Ferreira J.R. An improved monosegmented continuous-flow system for sample introduction in flame atomic spectrometry. Anal. Chim. Acta 206 (1988) 253
114. Tian L.-C., Sun X.-P., Xu Y.-Y., and Zhi Z.-L. Segmental flow-injection analysis: device and applications. Anal. Chim. Acta 238 (1990) 183
115. Buch-Rasmussen T. Determination of D-glucose in undiluted whole blood using chemically modified electrode and segmented sample injection in a flow system. Anal. Chim. Acta 237 (1990) 405
116. Buch-Rasmussen T. Flow system for direct determination of enzyme substrate in undiluted whole blood. Anal. Chem. 62 (1990) 933
117. Attiyat A.S., and Christian G.D. Discrete microsample injection into a gaseous carrier. Talanta 31 (1984) 463
118. Beauchemin D. Preliminary characterization of inductively coupled plasma mass spectrometry with flow injection into a gaseous (air) carrier. Analyst 118 (1993) 815
119. Craig J.M., and Beauchemin D. Univariate optimization of segmented-flow injection for inductively coupled plasma mass spectrometry. J. Anal. At. Spectrom 9 (1994) 1341
120. Stefanova V., Kmetov V., and Futekov L. Air segmented discrete introduction in inductively coupled plasma mass spectrometry. J. Anal. At. Spectrom. 12 (1997) 1271
121. Coedo A.G., Dorado M.T., Padilla I., and Alguacil F. Preconcentration and matrix separation of precious metals in geological and related materials using metalfix-chelamine resin prior to inductively coupled plasma mass spectrometry. Anal. Chim. Acta 340 (1997) 31
122. Rios A., Luque de Castro M.D., and Valcarcel M. Sandwich standardization in flow-injection analysis. Talanta 36 (1989) 612
123. Hsieh Y., and Crouch S.R. Air-segmented flow injection: a hybrid technique for automated, low dispersion determinations. Anal. Chim. Acta 303 (1995) 231
124. Hsieh Y., and Crouch S.R. Flow reversal and flow recycle air-segmented flow injection for simultaneous determination of a binary mixture. Anal. Chim. Acta 304 (1995) 333
125. Cambridge. Rigby I.A., and Stephen S.C. Determination of antimony and other impurities in high purity copper by ICP-MS. In: Holland G., and Eaton A.N. (Eds). Applications of Plasma Source Mass Spectrometry II. The Royal Society of Chemistry, Special Publication No. 124 (1993) 158-164
126. Wiederin D.R., Smyczek R.E., and Houk R.S. On-line standard additions with direct injection nebulization for inductively coupled plasma mass spectrometry. Anal. Chem. 63 (1991) 1626
127. Beauchemin D. On-line standard addition method with ICPMS using flow injection. Anal. Chem. 67 (1995) 1553
128. Tyson J.F., and Idris A.B. Determination of chromium in steel by flame atomic-absorption spectrometry using a flow injection standard additions method. Analyst 109 (1984) 23
129. Fang Z., Harris J.M., Ruzicka J., and Hansen E.H. Simultaneous flame photometric determination of lithium, sodium, potassium, and calcium by flow injection analysis with gradient scanning standard addition. Anal. Chem. 57 (1985) 1457
130. Zagatto E.A.G., Jacintho A.O., Krug F.J., Reis B.F., Bruns R.E., and Araújo M.C.U. Flow injection systems with inductively-coupled argon plasma atomic emission spectrometry, Part 2. The generalized standard addition method. Anal. Chim. Acta 145 (1983) 169
131. Rottmann L., and Heumann K.G. Development of an on-line isotope dilution technique with HPLC/ICP-MS for the accurate determination of elemental species. Fresenius J. Anal. Chem. 350 (1994) 221
132. Lásztity A., Viczián M., Wang X., and Barnes R.M. Sample analysis by on-line isotope dilution inductively coupled plasma mass spectrometry. J. Anal. At. Spectrom. 4 (1989) 761
133. Viczián M., Lásztity A., and Barnes R.M. Identification of potential environmental sources of childhood lead poisoning by inductively coupled plasma mass spectrometry. Verification and case studies. J. Anal. At. Spectrom. 5 (1990) 293
134. Alves L.C., Allen L.A., and Houk R.S. Measurement of vanadium, nickel, and arsenic in seawater and urine reference materials by inductively coupled plasma mass spectrometry with cryogenic desolvation. Anal. Chem. 65 (1993) 2468
135. Eroglu A.E., McLeod C.W., Leonard L.S., and McCubbin D. Determination of plutonium in seawater using co-precipitation and inductively coupled plasma mass spectrometry with ultrasonic nebulization. Spectrochim. Acta 53B (1998) 1221
136. Colodner D.C., Boyle E.A., and Edmond J.M. Determination of rhenium and platinum in natural waters and sediments, and iridium in sediments by flow injection isotope dilution inductively coupled plasma mass spectrometry. Anal. Chem. 65 (1993) 1419
137. Application of flow injection techniques with the VG PlasmaQuad 1. Determination of ng/g levels of uranium in NBS 1577A bovine liver,. Technical Information PQ 704 (1987)
138. Beauchemin D., and Kisilevsky R. A method based on ICP-MS for the analysis of Alzheimer's amyloid plaques. Anal. Chem. 70 (1998) 1026
139. Ackley K.L., Day J.A., Sutton K.L., and Caruso J.A. Investigation of problems associated with the determination of iodine in glacial acetic acid samples using flow injection analysis-inductively coupled plasma mass spectrometry. Anal. Commun. 36 (1999) 295
140. Al-Swaidan H.M. The determination of lead, nickel and vanadium in Saudi Arabian crude oil by sequential injection analysis/inductively-coupled plasma mass spectrometry. Talanta 43 (1996) 1313
141. Fucsko J., Tan S.S., and Balazs M.K. Measurement of trace metallic contaminants on silicon wafer surfaces in native and dielectric silicon oxides by vapor phase decomposition flow injection inductively coupled plasma-mass spectrometry. J. Electrochem. Soc. 140 (1993) 1105
142. Aggarwal J.K., Shabani M.B., Palmer M.R., and Ragnarsdottir K.V. Determination of the rare earth elements in aqueous samples at sub-ppt levels by inductively coupled plasma mass spectrometry and flow injection ICPMS. Anal. Chem. 68 (1996) 4418
143. Cambridge. Godfrey J., and McCurdy E. Investigation into the feasibility of ICP-MS as an alternative to fire assay measurements for gold and the platinum group elements. In: Holland G., and Eaton A.N. (Eds). Applications of Plasma Source Mass Spectrometry II. The Royal Society of Chemistry, Special Publication No. 124 (1993) 64-71
144. Valcárcel M., and Gallego M. In: Burguera J.L. (Ed). Flow Injection Atomic Spectroscopy (1989), Marcel Dekker, Inc., Norwalk
145. Haj-Hussein A.T., Christian G.D., and Ruzicka J. Determination of cyanide by atomic absorption using a flow injection conversion method. Anal. Chem. 58 (1986) 38
146. Giné F., Bergamin F. H., Reis B.F., and Tuon R.L. Intelligent flow-injection-inductively coupled plasma system for matrix matching. Anal. Chim. Acta 234 (1990) 207
147. Vickers G.H., Ross B.S., and Hieftje G.M. Reduction of mass-dependent interferences in inductively coupled plasma-mass spectrometry by using flow-injection analysis. Appl. Spectrosc. 43 (1989) 1330
148. Israel Y., Lásztity A., and Barnes R.M. On-line dilution, steady-state concentrations for inductively coupled plasma atomic emission and mass spectrometry achieved by tandem injection and merging-stream flow injection. Analyst 114 (1989) 1259
149. Huang K.S., and Jiang S.J. Determination of trace levels of metal ions in water samples by inductively coupled plasma mass spectrometry after on-line preconcentration on SO3-oxine CM-cellulose. Fresenius' J. Anal. Chem. 347 (1993) 238
150. Bloxham M.J., Hill S.J., and Worsfold P.J. Determination of trace metals in sea-water and the on-line removal of matrix interferences by flow injection with inductively coupled plasma mass spectrometric detection. J. Anal. At. Spectrom. 9 (1994) 935
151. Lu P.-L., Huang K.-S., and Jiang S.J. Determination of traces of copper, cadmium and lead in biological and environmental samples by flow-injection isotope dilution inductively coupled plasma mass spectrometry. Anal. Chim. Acta 284 (1993) 181
152. Ebdon L., Fisher A.S., Worsfold P.J., Crews H., and Baxter M. On-line removal of interferences in the analysis of biological materials by flow injection inductively coupled plasma mass spectrometry. J. Anal. At. Spectrom. 8 (1993) 691
153. Hollenbach M., Grohs J., Mamich S., Kroft M., and Denoyer E.R. Determination of technetium-99, thorium-230 and uranium-234 in soils by inductively coupled plasma mass spectrometry using flow injection preconcentration. J. Anal. At. Spectrom. 9 (1994) 927
154. Becotte-Haigh P., Tyson J.F., and Denoyer E. Flow injection manifold for matrix removal in inductively coupled plasma mass spectrometry by solid phase extraction: determination of Al, Be, Li and Mg in a uranium matrix. J. Anal. At. Spectrom. 13 (1998) 1327
155. Israel Y., and Barnes R.M. Standard Addition Method in flow injection analysis with inductively coupled plasma atomic emission spectrometry. Anal. Chem. 56 (1984) 1188
156. Reis F., Giné M.F., Krug F.J., and Bergamin F. H. Multipurpose Flow Injection System Part 1. Programmable Dilutions and Standard Additions for Plant Digests Analysis by Inductively Coupled Plasma Atomic Emission Spectrometry. J. Anal. At. Spectrom. 7 (1992) 865
157. Beauchemin D., and Specht A.A. On-line isotope dilution analysis with ICPMS using reverse flow injection. Anal. Chem. 69 (1997) 3183
158. Specht A.A., and Beauchemin D. Automated on-line isotope dilution analysis with ICP-MS using sandwich flow injection. Anal. Chem. 70 (1998) 1036
159. Menegário A.A., and Giné M.F. On-line removal of anions for plant analysis by inductively coupled plasma mass spectrometry. J. Anal. At. Spectrom. 12 (1997) 671
160. Lorber A., Karpas Z., and Halicz L. Flow injection method for determination of uranium in urine and serum by inductively coupled plasma mass spectrometry. Anal. Chim. Acta 334 (1996) 295
161. Dundar M.S., and Haswell S.J. Use of a model gut system to study the effects of dietary fibre and multivitamins on the speciation of copper, zinc and iron. Analyst 120 (1995) 2085
162. 8 by extraction chromatography. Anal. Chim. Acta 274 (1993) 237
163. Chen J.-S., Berndt H., and Tölg G. A contribution to the trace analysis of high-purity iron by atomic spectrometry (flame-AAS, furnace-AAS, ICP-OES). Fresenius J. Anal. Chem. 344 (1992) 526
164. Sun Y.-C., Mierzwa J., Lin C.-F., Yeh T.I., and Yang M.-H. Selective precipitation separation and inductively coupled plasma mass spectrometric determination of trace metal impurities in high purity silver. Analyst 122 (1997) 437
165. Krivan V., Hausbeck R., Willhartitz P., Krismer R., and Ortner H.M. Analysis of tantalum by ICP-AES involving trace-matrix separation. Fresenius J. Anal. Chem. 341 (1991) 550
166. Yang X.-J., and Guan J.-S. End-on viewed inductively coupled plasma for the determination of trace impurities in high-purity scandium oxide by extraction chromatography. Anal. Chim. Acta 279 (1993) 261
167. Yang X.-J. Extractive chromatographic separation and inductively coupled plasma atomic emission spectrometric determination of trace impurities in high purity europium oxide. Talanta 41 (1994) 1807
168. Goossens J., and Dams R. Anion exchange for the elimination of spectral interferences caused by chlorine and sulfur in inductively coupled plasma mass spectrometry. J. Anal. At. Spectrom. 7 (1992) 1167
169. Arpadjan S., Vassileva E., and Momchilova S. Preconcentration methods for determination of trace amounts of impurities in high-purity copper salts by atomic absorption spectrometry and inductively coupled plasma atomic emission spectrometry. Analyst 117 (1992) 1933
170. López Garcia I., Viñas P., and Hernández Córdoba M. Flow injection dilution system for the analysis of highly concentrated samples using flame atomic absorption spectrometry. J. Anal. At. Spectrom. 9 (1994) 1167
171. Brito V.O., and Raimundo Jr. I.M. Simultaneous multiple injection in monosegmented flow analysis. Anal. Chim. Acta 371 (1998) 317
172. Tyson J.F., Ge H., and Denoyer E.R. On-line dilution for ICP-MS with a flow injection recirculating loop manifold. J. Anal. At. Spectrom. 12 (1997) 1163
173. Silva E.C., Araújo M.C.U., Honorato R.S., Lima J.L.F.C., Zagatto E.A.G., and Boscolo Brienza S.M. Standard additions in flow injection analysis based on merging zones and gradient exploitation: application to copper determination in spirits. Anal. Chim. Acta 319 (1996) 153
174. Bloxham M.J., Hill S.J., and Worsfold P.J. Analysis of trace metals in seawater by inductively coupled plasma mass spectrometry and related techniques. Anal. Proc. 30 (1993) 159
175. Valcarcel M., and Luque de Castro M.D. Continuous separation techniques in flow injection analysis A review. J. Chromatogr. 393 (1987) 3
176. Fang Z., Xu S., and Zhang S. Fundamental and practical considerations in the design of on-line column preconcentration for flow-injection atomic spectrometric systems. Anal. Chim. Acta 200 (1987) 35
177. Fang Z. Flow-injection on-line column preconcentration in atomic spectrometry. Spectrochim. Acta Rev. 14 (1991) 235
178. Horváth Z., Lásztity A., and Barnes R.M. Preconcentration and separation techniques for inductively coupled plasma atomic and mass spectrochemical analyses. Spectrochim. Acta Rev. 14 (1991) 45
179. Ruzicka J., and Arndal A. Sorbent extraction in flow injection analysis and its application to enhancement of atomic spectrometry. Anal. Chim. Acta 216 (1989) 243
180. Luque de Castro M.D., and Gámiz-Gracia L. Miniaturisation: a well-defined trend in separation and preconcentration techniques. Anal. Chim. Acta 351 (1997) 23-40
181. Zolotova Yu.A., and Kuz'min N.M. In: Svehla G. (Ed). Wilson and Wilson's Comprehensive Analytical Chemistry Vol. XXV (1990), Elsevier, New York
182. Vicente O., Padró A., Martinez L., Olsina R., and Marchevsky E. Determination of some rare earth elements in seawater by inductively coupled plasma mass spectrometry using flow injection preconcentration. Spectrochim. Acta 53B (1998) 1281
183. Caroli S., Alimonti A., Petrucci F., and Horváth Zs. On-line preconcentration and determination of trace elements by flow injection-inductively coupled plasma atomic emission spectrometry. Anal. Chim. Acta 248 (1991) 241
184. Porta V., Sarzanini C., Abollino O., Mentasti E., and Carlini E. Preconcentration and inductively coupled plasma atomic emission spectrometric determination of metal ions with on-line chelating ion exchange. J. Anal. At. Spectrom. 7 (1992) 19
185. Lee M.L., Tölg G., Beinrohr E., and Tschöpel P. Preconcentration of palladium, platinum and rhodium by on-line sorbent extraction for graphite furnace atomic absorption spectrometry and inductively coupled plasma atomic emission spectrometry. Anal. Chim. Acta 272 (1993) 193
186. Obata H., Karatani H., and Nakayama E. Automated determination of iron in seawater by chelating resin concentration and chemiluminescence detection. Anal. Chem. 65 (1993) 1524
187. Aldstadt J.A., Kuo J.M., Smith L.L., and Erickson M.D. Determination of uranium by flow injection inductively coupled plasma mass spectrometry. Anal. Chim. Acta 319 (1996) 135
188. Fairman B., Sanz-Medel A., and Jones P. Field sampling technique for the 'fast reactive' aluminium fraction in waters using a flow injection minicolumn system with inductively coupled plasma atomic emission spectrometric and inductively coupled plasma mass spectrometric detection. J. Anal. At. Spectrom. 10 (1995) 281
189. Wen B., Shan X.-Q., and Xu S.-G. Preconcentration of ultratrace rare earth elements in seawater with 8-hydroxyquinoline immobilized polyacrylonitrile hollow fiber membrane for determination by inductively coupled plasma mass spectrometry. Analyst 124 (1999) 621
190. Wang X., Zuang Z., Yang C., and Zhyu F. The application of flow injection iminodiacetic acid-ethycellulose membrane preconcentration and separation technique to atomic spectrometry. Spectrochim. Acta 53B (1998) 1437
191. Machado L.F.R., Jacintho A.O., Menegário A.A., Zagatto E.A.G., and Giné M.F. Electrochemical and chemical processes for hydride generation in flow injection ICP-MS: determination of arsenic in natural waters. J. Anal. At. Spectrom. 13 (1998) 1343
192. Beauchemin D. Hydride generation interface for the determination of inorganic As and organoarsenic by ICP-MS using open-focused microwave digestion to enhance the pre-reduction process. J. Anal. At. Spectrom. 13 (1998) 1
193. van Elteren J.T., Šlejkovec Z., and Das H.A. A mathematical model for optimisation of flow injection-hydride generation atomic fluorescence spectrometry. Spectrochim. Acta 54B (1999) 311
194. Hanna C.P., Haigh P.E., Tyson J.F., and McIntosh S. Examination of separation efficiencies of mercury vapour for different gas-liquid separators in flow injection cold vapour atomic absorption spectrometry with amalgam preconcentration. J. Anal. At. Spectrom. 8 (1993) 585
195. Carrero P.E., and Tyson J.F. Determination of selenium by atomic absorption spectrometry with simultaneous retention of selenium(IV) and tetrahydroborate(III) on an anion-exchange resin followed by flow injection hydride generation from the solid phase. Analyst 122 (1997) 915
196. Tao G.-H., and Sturgeon R.E. Sample nebulization for minimization of transition metal interferences with selenium hydride generation ICP-AES. Spectrochim. Acta 54B (1999) 481
197. Creed J.T., Magnuson M.L., Brockhoff C.A., Chamberlain I., and Sivaganesan M. Arsenic determination in saline waters utilizing a tubular membrane as a gas-liquid separator for hydride generation inductively coupled plasma mass spectrometry. J. Anal. At. Spectrom. 11 (1996) 505
198. Luque de Castro M.D., and Papaefstathiou I. Pervaporation: a useful tool for speciation analysis. Spectrochim. Acta 53B (1998) 311
199. Zhang L.S., and Combs S.M. Determination of selenium and arsenic in plant and animal tissues by hydride generation inductively coupled plasma mass spectrometry. J. Anal. At. Spectrom. 11 (1996) 1049
200. Knight R., Haswell S.J., Lindow S.W., and Batty J. Determination of mercury in hair by coupled CVAA-ICP-MS. J. Anal. At. Spectrom. 14 (1999) 127
201. Reamer D.C., Veillon C., and Tokousbalides P.T. Radiotracer techniques for evaluation of selenium hydride generation systems. Anal. Chem. 53 (1981) 245
202. Ng J.C., Johnson D., Imray P., Chiswell B., and Moore M.R. Speciation of arsenic metabolites in the urine of occupational workers and experimental rats using an optimised hydride cold-trapping method. Analyst 123 (1998) 929
203. Haraldsson C., Westerlund S., and Öhman P. Determination of mercury in natural samples at the sub-nanogram level using inductively coupled plasma/mass spectrometry after reduction to elemental mercury. Anal. Chim. Acta 221 (1989) 77
204. Brown R., Gray D.J., and Tye D. Hydride generation ICP-MS (HG-ICP-MS) for the ultra lowlevel determination of mercury in biota. Water Air Soil Pollut. 80 (1995) 1237
205. Gomez M.M., and McLeod C.W. Trace enrichment and determination of gold by flow injection inductively coupled plasma spectrometry, Part 1. Inductively coupled plasma atomic emission spectrometry. J. Anal. At. Spectrom. 8 (1993) 461
206. Karunasagar D., Arunachalam J., and Gangadharan S. Development of a 'collect and punch' cold vapour inductively coupled plasma mass spectrometric method for the direct determination of mercury at nanograms per litre levels. J. Anal. At. Spectrom. 13 (1998) 679
207. van Staden J.F. In: Burguera J.L. (Ed). Flow Injection Atomic Spectroscopy (1989), Marcel Dekker, Inc., Amsterdam
208. Lucy C.A., and Yeung K.K.-C. Solvent extraction-flow injection without phase separation through the use of the differential flow velocities within the segmented flow. Anal. Chem. 66 (1994) 2220
209. Kubán V. Crit. Rev. Anal. Chem. 22 (1991) 477
210. Manzoori J.L., and Miyazaki A. Indirect inductively coupled plasma atomic emission determination of fluoride in water samples by flow injection solvent extraction. Anal. Chem. 62 (1990) 2457
211. Yamamoto M., Obata Y., Nitta Y., Nakata F., and Kumamaru T. Microporous polytetrafluoroethylene tube separator for the determination of beryllium by flow injection-or suction-flow-solvent extraction followed by inductively coupled plasma atomic emission spectrometry. J. Anal. At. Spectrom. 3 (1988) 441
212. Peterson K.L., Logan B.K., Christian D.G., and Ruzicka J. Sequential-injection extraction for sample preparation. Anal. Chim. Acta 337 (1997) 99
213. Yan X.-P., Kerrich R., and Hendry M.J. Flow injection on-line group preconcentration and separation of (ultra)trace rare earth elements in environmental and geological samples by precipitation using a knotted reactor as a filterless collector for inductively coupled plasma mass spectrometric determination. J. Anal. At. Spectrom. 14 (1999) 215
214. Pretty J.R., and Caruso J.A. Signal enhancement of lead and thallium in inductively coupled plasma atomic emission spectrometry using on-line anodic stripping voltammetry. J. Anal. At. Spectrom. 8 (1993) 545
215. Pretty J.R., Evans E.H., Blubaugh E.A., Shen W.L., Caruso J.A., and Davidson T.M. Minimisation of sample matrix effects and signal enhancement for trace analytes using anodic stripping voltammetry with detection by inductively coupled plasma atomic emission spectrometry and inductively coupled plasma mass spectrometry. J. Anal. At. Spectrom. 5 (1990) 437
216. Pretty J.R., Blubaugh E.A., Evans E.H., Caruso J.A., and Davidson T.M. Determination of copper and cadmium using an on-line anodic stripping voltammetry flow cell with detection by inductively coupled plasma mass spectrometry. J. Anal. At. Spectrom. 7 (1992) 1131
217. Pretty J.R., Blubaugh E.A., Caruso J.A., and Davidson T.M. Determination of chromium(VI) and vanadium(V) using an on-line anodic stripping voltammetry flow cell with detection by inductively coupled plasma mass spectrometry. Anal. Chem. 66 (1994) 1540
218. Pretty J.R., Duckworth D.C., and Van Berkel G.J. Anodic stripping voltammetry coupled on-line with inductively coupled plasma mass spectrometry: optimization of a thin-layer flow cell system for analyte signal enhancement. Anal. Chem. 69 (1997) 3544
219. Akatsuka K., McLaren J.W., Lam J.W., and Berman S.S. Determination of iron and ten other trace elements in the open ocean seawater reference material NASS-3 by inductively coupled plasma mass spectrometry. J. Anal. At. Spectrom. 7 (1992) 889
220. Dadfarnia S., and McLeod C. On-line trace enrichment and determination of uranium in waters by flow injection inductively coupled plasma mass spectrometry. Appl. Spectrosc. 48 (1994) 1331
221. Lan C.-R., and Yang M.-H. Synthesis, properties and applications of silica-immobilized 8-quinolinol Part 2. On-line column preconcentration of copper, nickel and cadmium from sea water and determination by inductively-coupled plasma atomic emission spectrometry. Anal. Chim. Acta 287 (1994) 101
222. Lofthouse S.D., Greenway G.M., and Stephen S.C. Miniaturisation of a matrix separation/preconcentration procedure for inductively coupled plasma mass spectrometry. Anal. Comm. 35 (1998) 177
223. Pasullean B., Davidson C.M., and Littlejohn D. On-line preconcentration of chromium(III) and speciation of chromium in waters by flame atomic absorption spectrometry. J. Anal. At. Spectrom. 10 (1995) 241
224. Martin F.M., and Donard O.F.X. Aqueous ethylation of organotin compounds in simple solution for speciation analysis by cryofocussing and detection by atomic absorption spectrometry-comparison with hydride generation. Fresenius J. Anal. Chem. 348 (1994) 1768
225. Martinez L.D., Saidman E., Marchevsky E., and Olsina R. Determination of selenium in geochemical samples by flow injection hydride generation inductively coupled plasma atomic emission spectrometry following on-line removal of iron interference by anion exchange. J. Anal. At. Spectrom. 12 (1997) 487
226. Becotte-Haih P., Tyson J.F., Denoyer E., and Hinds M.W. Determination of arsenic in gold by flow injection inductively coupled plasma mass spectrometry with matrix removal by reductive precipitation. Spectrochim. Acta 51B (1996) 1823
227. Tyson J.F. High-performance, flow-based, sample pre-treatment and introduction procedures for analytical atomic spectrometry. J. Anal. At. Spectrom. 14 (1999) 169
228. Vuchkova L., and Arpadjan S. Behaviour of the dithiocarbamate complexes of arsenic, antimony, bismuth, mercury, lead, tin and selenium in methanol with a hydride generator. Talanta 43 (1996) 479
229. Chatterjee A., and Irgolic K.J. Behaviour of selenium compounds in FI-HG-AAS. Anal. Commun. 35 (1998) 337
230. Pyrzynska K. Speciation Analysis of Some Organic Selenium Compounds. Analyst 121 (1996) 77R
231. Le X.C., Cullen W.R., and Reimer K.J. Effect of cysteine on the speciation of arsenic by using hydride generation atomic absorption spectrometry. Anal. Chim. Acta 285 (1994) 277
232. Chen H., Brindle I.D., and Le X.C. Prereduction of arsenic(V) to arsenic(III), enhancement of the signal, and reduction of interferences by L-cysteine in the determination of arsenic by hydride generation. Anal. Chem. 64 (1992) 667
233. Gómez M.M., Gasparic T., Palacios M.A., and Camara C. Determination of five selenium compounds in urine by liquid chromatography with focused microwave assisted digestion and hydride generation-atomic absorption spectrometric detection. Anal. Chim. Acta 374 (1998) 241
234. Howard A.G., and Salou C. Arsenic speciation by cryogenic trap hydride generation atomic absorption spectroscopy: performance enhancement by pre-derivatization. J. Anal. At. Spectrom. 13 (1998) 683
235. Rubio R., Padró A., and Rauret G. Photoreduction-hydride generation: a new on-line system for the determination of selenate and selenite. Anal. Chim. Acta 353 (1997) 91
236. Santosa S.J., Mokudai H., and Tanaka S. Automated continuous-flow hydride generation with inductively coupled plasma mass spectrometric detection for the determination of trace amounts of selenium(IV), and total antimony, arsenic and germanium in sea-water. J. Anal. At. Spectrom. 12 (1997) 409
237. Ebdon L., Fisher A.S., and Worsfold P.J. Determination of arsenic, chromium, selenium and vanadium in biological samples by inductively coupled plasma mass spectrometry using on-line elimination of interference and preconcentration by flow injection. J. Anal. At. Spectrom. 9 (1994) 611
238. Cox A.G., Cook I.G., and McLeod C.W. Rapid sequential determination of chromium(III)-chromium(VI) by flow injection analysis-inductively coupled plasma atomic-emission spectrometry. Analyst 110 (1985) 331
239. Sahayam A.C., Arunachalam J., and Gangadharan S. Determination of Cr(VI) in potable waters after selective separation of Cr(III) using ZnO. Can. J. Anal. Sci. Spectrosc. 43 (1998) 4
240. Vercoutere K., Cornelis R., Mees L., and Quevauviller Ph. Certification of the contents of the chromium(III) and chromium(VI) species and total chromium in a lyophilised solution (CRM 544). Analyst 123 (1998) 965
241. Campanella L., Pyrzynska K., and Trojanowicz M. Chemical speciation by flow-injection analysis. A review. Talanta 43 (1996) 825
242. Luque de Castro M.D. Speciation studies by flow-injection analysis. Talanta 33 (1986) 45
243. Luque de Castro M.D., Bryce D.W., and Izquierdo A. Speciation with unsegmented continuous systems. Talanta 42 (1995) 1215
244. Elwaer A.R., McLeod C.W., and Thompson K.C. Stability of bromate species immobilised on microcolumns of activated alumina. Analyst 123 (1998) 981
245. Beauchemin D., and Berman S.S. Determination of trace metals in reference water standards by inductively coupled plasma mass spectrometry with on-line preconcentration. Anal. Chem. 61 (1989) 1857
246. Willie S.N., Sturgeon R.E., and Berman S.S. Comparison of i-quinolinol-bonded polymer supports for the preconcentration of trace metals from seawater. Anal. Chim. Acta 149 (1983) 59
247. Greenway G.M., and Townshend A. On-line immobilized chelating agents in flow injection systems. Anal. Proc. 30 (1993) 438
248. Lan C.-R., and Yang M.-H. Synthesis, properties and applications of silica-immobilized 8-quinolinol Part 1. Characterization of silica-immobilized 8-quinolinol synthesized via a Mannich reaction. Anal. Chim. Acta 287 (1994) 101
249. Seubert A., Petzold G., and McLaren J.W. Synthesis and application of an inert type of 8-hydroxyquinoline-gased chelating ion exchanger for seawater analysis using on-line inductively c coupled plasma mass spectrometry detection. J. Anal. At. Spectrom. 10 (1995) 371
250. Greenway G.M., Nelms S.M., and Koller D. Application of a novel iminodiacetate chelating material to automated matrix separation for inductively coupled plasma mass spectrometry. Anal. Commun. 33 (1996) 57
251. Peixoto C.R.M., Gushikem Y., and Baccan N. Selective spectrophotometric determination of trace amounts of chromium(VI) using a flow injection system with a microcolumn of zirconium(IV) oxide modified silica gel. Analyst 117 (1992) 1029
252. Maquieira A., Elmahadi H.A.M., and Puchades R. Immobilized cyanobacteria for on-line trace metal enrichment by flow injection atomic absorption spectrometry. Anal. Chem. 66 (1994) 3638
253. Maquieira A., Elmahadi H.A.M., and Puchades R. Use of Saccharomyces cerevisiae in flow injection atomic absorption spectrometry for trace metal preconcentration. Anal. Chem. 66 (1994) 1462
254. de la Calle-Guntiñas M.B., Madrid Y., and Cámara C. Fructose-6-phosphate kinase immobilized on controlled-pore glass as a substrate for selective separation of antimony(III). J. Anal. At. Spectrom. 8 (1993) 745
255. Drake L.R., and Rayson G.D. Plant-derived materials for metal ionselective binding and preconcentration. Anal. Chem. 68 (1996) 22A
256. Yan X.-P., Kerrich R., and Hendry M.J. Determination of (ultra)trace amounts of arsenic(III) and arsenic(V) in water by inductively coupled plasma mass spectrometry coupled with flow injection on-line sorption preconcentration and separation in a knotted reactor. Anal. Chem. 70 (1998) 4736
257. Gáspár A., and Posta J. On-line sorption preconcentration of chromium(VI) and its determination by flame atomic absorption spectrometry. Anal. Chim. Acta 354 (1997) 151
258. Gallego M., Petit de Peña Y., and Valcárcel M. Fullerenes as sorbent materials for metal preconcentration. Anal. Chem. 66 (1994) 4074
259. Story W.C., Caruso J.A., Heitkemper D.T., and Perkins L. Elimination of the chloride interference on the determination of arsenic using hydride generation inductively coupled plasma mass spectrometry. J. Chromatogr. Sci. 30 (1992) 427
260. Anderson S.T.G., Robért R.V.D., and Farrer H.N. Determination of total and leachable arsenic and selenium in soils by continuous hydride generation inductively coupled plasma mass spectrometry. J. Anal. At. Spectrom. 9 (1994) 1107
261. Fang Z. In: Burguera J.L. (Ed). Flow Injection Atomic Spectroscopy (1989), Marcel Dekker, Inc., New York
262. Howard A.G. (Boro)hydride techniques in trace element speciation. J. Anal. At. Spectrom. 12 (1997) 267
263. Nakahara T. Hydride generation techniques and their applications in inductively coupled plasma-atomic emission spectrometry. Spectrochim. Acta Rev. 14 (1991) 95
264. Godden R.G., and Thomerson D.R. Generation of covalent hydrides in atomic absorption spectroscopy. Analyst 105 (1980) 1137
265. Branch C.H., and Hutchison D. Simultaneous determination of arsenic and selenium in geochemical samples by hydride evolution and atomicabsorption spectrometry: success and failure. Analyst 110 (1985) 163
266. Agterdenbos J., and Bax D. Mechanisms in hydride generation AAS. Fresenius' Z. Anal. Chem. 323 (1986) 783
267. Tesfalidet S., and Irgum K. Polymer-bound tetrahydroborate for arsine generation in a flow injection system. Anal. Chem. 61 (1989) 2079
268. Narasaki H., Kato Y., and Kimura H. Anal. Sci. 8 (1992) 893
269. Tesfalidet S., and Irgum K. Heterogeneous hydride generation in a packed membrane cell. Fresenius' Z. Anal. Chem. 341 (1991) 532
270. Brockmann A., Nonn C., and Golloch A. New concept for hydride generation technique: electrochemical hydride generation. J. Anal. At. Spectrom. 8 (1993) 397
271. Lin Y., Wang X., Yuan D., Yang P., Huang B., and Zhuang Z. Flow injection-electrochemical hydride generation technique for atomic absorption spectrometry. J. Anal. At. Spectrom. 7 (1992) 287
272. Hwang T.-J., and Jiang S.-J. Determination of cadmium by flow injection inductively coupled plasma mass spectrometry with vapour generation sample introduction. J. Anal. At. Spectrom. 12 (1997) 579
273. Blais J.S., Momplaisir G.M., and Marshall W.D. Determination of arsenobetaine, arsenocholine, and tetramethylarsonium cations by liquid chromatography-thermochemical hydride generation-atomic absorption spectrometry. Anal. Chem. 62 (1990) 1161
274. Fernández de la Campa M.F., Sgovia García E., Valdés-Hevia y Temprano M.C., Aizpún Fernández B., Marchante Gayón J.M., and Sanz-Medel A. Effects of organised media on the generation of volatile species for atomic spectrometry. Spectrochim. Acta 50B (1995) 377
275. Camuña F., Sanchez Uria J.E., and Sanz Medel A. Continuous flow and flow injection halogen generation for chloride, bromide and iodide determinations by microwave induce plasma atomic emission spectroscopy. Spectrochim. Acta 48B (1993) 1115
276. Cox R.J., Pickford C.J., and Thompson M. Determination of iodine-129 in vegetable samples by inductively coupled plasma mass spectrometry. J. Anal. At. Spectrom. 7 (1992) 635
277. Lopez-Molinero A., Benito M., Aznar Y., Villareal A., and Castillo J.R. Volatile species of arsenic(III) with fluoride for gaseous sample introduction into the inductively coupled plasma. J. Anal. At. Spectrom. 13 (1998) 215
278. Grégoire D.C. Sample introduction techniques for the determination of osmium isotope ratios by inductively coupled plasma mass spectrometry. Anal. Chem. 62 (1990) 141
279. Park C.J., and Yim S.A. Determination of nickel in water samples by isotope dilution inductively coupled plasma mass spectrometry with sample introduction by carbonyl vapor generation. J. Anal. At. Spectrom. 14 (1999) 1061
280. Wilke T., Wildner H., and Wünsch G. Ester generation for the determination of ultratrace amounts of boron in volatile high-purity process chemicals by inductively coupled plasma mass spectrometry. J. Anal. At. Spectrom. 12 (1997) 1083
281. Rapsomanikis S. Derivatization by ethylation with sodium tetraethylborate for the speciation of metals and organometallics in environmental samples. Analyst 119 (1994) 1429
282. Sturgeon R.E., Liu J., Boyko V.J., and Luong V.T. Determination of copper in environmental matrices following vapor generation. Anal. Chem. 68 (1996) 1883
283. Zhuang Z., Wang X., Yang P., Yang C., and Huang B. Flow-injection online Co-APDC copreciptation preconcentration and determination of lead and copper in seawater with graphite furnace atomic absorption spectrometry. Can. J. Appl. Spectrosc. 39 (1994) 101
284. Bersier P.M., Howell J., and Bruntlett C. Advanced electroanalytical techniques versus atomic absorption spectrometry, inductively coupled plasma atomic emission spectrometry and inductively coupled plasma mass spectrometry in environmental analysis. Analyst 119 (1994) 219
285. Plantz R., Fritz J.S., Smith F.G., and Houk R.S. Separation of trace metal complexes for analysis of samples of high salt content by inductively coupled plasma mass spectrometry. Anal. Chem. 61 (1989) 149
286. Warnken K.W., Gill G.A., Wen L.-S., Griffin L.L., and Santschi P.H. Trace metal analysis of natural waters by ICP-MS with on-line preconcentration and ultrasonic nebulization. J. Anal. At. Spectrom. 14 (1999) 247
287. Hwang T.-J., and Jiang S.-J. Determination of trace amounts of zinc in water samples by flow injection isotope dilution inductively coupled plasma mass spectrometry. Analyst 122 (1997) 233
288. Taylor D.B., Kingston H.M., Nogay D.J., Koller D., and Hutton R. On-line solid-phase chelation for the determination of eight metals in environmental waters by inductively coupled plasma mass spectrometry. J. Anal. At. Spectrom. 11 (1996) 187
289. Beauchemin D., and Specht A.A. Analysis of river water by ICP-MS with on-line preconcentration using flow injection. Can. J. Anal. Sci. Spectrosc. 43 (1998) 43
290. Gómez Gómez M.M., and McLeod C.W. Trace enrichment and determination of gold by flow injection inductively coupled plasma spectrometry Part II. Inductively coupled plasma mass spectrometry. J. Anal. At. Spectrom. 10 (1995) 89
291. Martín-Esteban A., Fernández P., Pérez-Conde C., Gutiérrez A., and Cámara C. On-line preconcentration of aluminium with immobilized Chromotrope 2B for the determination by flame atomic absorption spectrometry and inductively coupled plasma mass spectrometry. Anal. Chim. Acta 304 (1995) 121
292. Sayama Y., Hayashibe Y., and Fukuda M. Determination of cadmium and bismuth in high-purity zinc metal by inductively coupled plasma mass spectrometry with on-line matrix separation. Fresenius J. Anal. Chem. 353 (1995) 162
293. Coedo A.G., López T.D., and Alguacil F. On-line ion-exchange separation and determination of niobium, tantalum, tungsten, zirconium and hafnium in high-purity iron by flow injection inductively coupled plasma mass spectrometry. Anal. Chim. Acta 315 (1995) 331
294. Nickson R.A., Hill S.J., and Worsfold P.J. Solid phase techniques for the preconcentration of trace metals from natural waters. Anal. Proc. 32 (1995) 387
295. Porta V., Sarzanini C., Mentasti E., and Abollino O. On-line preconcentration system for inductively coupled plasma atomic emission spectrometric with quinolin-8-ol and Amberlite XAD-2 resin. Anal. Chim. Acta 258 (1992) 237
296. Furuta N., Brushwyler K.R., and Hieftje G.M. Flow-injection analysis utilizing a spectrally segmented photodiode-array inductively coupled plasma emission spectrometer-I. Microcolumn preconcentration for the determination of molybdenum. Spectrochim. Acta 44B (1989) 349
297. Schramel P., Xu L., Knapp G., and Michaelis M. Multi-elemental analysis in biological samples by on-line preconcentration on 8-hydroxyquinoline-cellulose microcolumn coupled to simultaneous ICP-AES. Fresenius J. Anal. Chem 345 (1993) 600
298. Schramel P., Xu L.-Q., Knapp G., and Michaelis M. Application of an on-line preconcentration system in simultaneous ICP-AES. Mikrochim. Acta 106 (1992) 191
299. Peng X., Jiang Z., and Zen Y. On-line microcolumn preconcentration with desolvation and determination of trace elements by flow-injection inductively coupled plasma atomic emission spectrometry. Anal. Chim. Acta 283 (1993) 887
300. Yang X.-J., Guan J.-S., and Shen T.-J. Determination of trace zirconium and hafnium in high-purity scandium oxide by inductively coupled plasma atomic emission spectrometry and extraction chromatography. Anal. Chim. Acta 277 (1993) 157
301. Voldet P. From neutron activation to inductively coupled plasma-atomic emission spectrometry in the determination of rare-earth elements in rocks. Trends Anal. Chem. 12 (1993) 339
302. Beneteau S.B., and Richardson J.M. Rhenium-osmium isotope ratio determination by ICP-MS. At. Spectrosc. 13 (1992) 118
303. Watkins P.J., and Nolan J. Determination of rare-earth elements, yttrium, scandium and hafnium using cation-exchange separation and inductively coupled plasma-atomic emission spectrometry. Chem. Geol. 95 (1992) 131
304. Luo X.-Y., Su Z.-X., Gao W.-Y., Zhan G.-Y., and Chang X.-J. Separation and preconcentration of traces of gallium, titanium and zirconium by means of a new chelating resin containing pyrocatechol violet as functional group Determination by ICP-OES. Fresenius J. Anal. Chem 344 (1992) 252
305. Orians K.J., and Boyle E.A. Determination of picomolar concentrations of titanium, gallium and indium in sea water by inductively coupled plasma mass spectrometry following an 8-hydroxyquinoline chelating resin preconcentration. Anal. Chim. Acta 282 (1993) 63
306. Möller P., Dulski P., and Luck J. Determination of rare earth elements in seawater by inductively coupled plasma-mass spectrometry. Spectrochim. Acta 47B (1992) 1379
307. Vasconcelos M.T.S.D., and Leal M.F.C. Speciation of Cu, Pb, Cd and Hg in waters for the Oporto coast in Portugal, using pre-concentration in a Chelamine resin column. Anal. Chim. Acta 353 (1997) 189
308. Lee C.H., Kim J.S., Suh M.Y., and Lee W. A chelating resin containing 4-(2-thiazolylazo)resorcinol as the functional group. Synthesis and sorption behaviour for trace metal ions. Anal. Chim. Acta 339 (1997) 303
309. Durrant S.F., Krushevska A., Amarasiriwardena D., Argentine M.D., Romon-Guesnier S., and Barnes R.M. Matrix separation by chelation to prepare biological materials for isotopic zinc analysis by inductively coupled plasma mass spectrometry. J. Anal. At. Spectrom. 9 (1994) 199
310. Israel Y., Krushevska A.P., Foner H., Martines L.J., and Barnes R.M. Flow configurations for interfacing automatic ion-exchange devices with sequential inductively coupled plasma atomic emission spectrometry: application to trace metal determination in pure alkali metal salts. J. Anal. At. Spectrom. 8 (1993) 467
311. Stroh A., Denoyer E.R., Lu Q., and Völlkopf U. Optimization and use of flow injection vapor generation for ICP-MS. FIAS Application Report (1993), Perkin Elmer SCIEX, New York
312. Voellkopf U., Guensel A., Paul M., and Wiesmann H. Applications of ICP-MS with sample introduction by electrothermal vaporization and flow injection techniques. In: Holland G., and Eaton A.N. (Eds). Applications of Plasma Source Mass Spectrometry (1991), The Royal Society of Chemistry, Norwalk 162-177
313. Bowman J., Fairman B., and Catterick T. Development of a multi-element hydride generation-inductively coupled plasma mass spectrometry procedure for the simultaneous determination of arsenic, antimony and selenium in waters. J. Anal. At. Spectrom. 12 (1997) 313
314. Ibrahim H., Issa Y.M., and Kamal R. Mikrochim. Acta 109 (1992) 201
315. Alonso E.V., de Torres A.G., and Pavón J.M.C. Determination of nickel in biological materials after microwave dissolution using inductively coupled plasma atomic emission spectrometry with prior extraction into butan-1-ol. Analyst 117 (1992) 1157
316. Almendro J.M.L., Ojeda C.B., de Torres A.G., and Pavón J.M.C. Determination of cadmium in biological samples by inductively coupled plasma atomic emission spectrometry after extraction with 1,5-bis(di-2-pyridyl-methylene)thiocarbonohydrazide. Analyst 117 (1992) 1749
317. Alonso E.V., de Torres A.G., and Pavón J.M.C. Determination of nickel in biological samples by inductively coupled plasma atomic emission spectrometry after extraction with 1,5-bis[phenyl-(2-pyridyl)methylene]thiocarbonohydrazide. J. Anal. At. Spectrom. 8 (1993) 843
318. Patterson K.Y., Veillon C., Moser-Veillon P.B., and Wallace G.F. Determination of zinc stable isotopes in biological materials using isotope dilution inductively coupled plasma mass spectrometry. Anal. Chim. Acta 258 (1992) 317
319. Al-Swaidan H.M. Determination of lead and nickel in Saudi Arabian crude oils by ICP/MS using MIBK for sample pretreatment. Anal. Lett. 25 (1992) 2157
320. Lord III C.J. Determination of lead and lead isotope ratios in gasoline by inductively coupled plasma mass spectrometry. J. Anal. At. Spectrom. 9 (1994) 599
321. Makishima A., Inamoto I., and Chiba K. Determination of gallium in pure aluminum by isotope dilution analysis with solvent extraction using inductively coupled plasma mass spectrometry. Appl. Spectrosc. 44 (1990) 91
322. Hall G.E.M., Pelchat J.C., and Loop J. Determination of zirconium, niobium, hafnium and tantalum at low levels in geological materials by inductively coupled plasma mass spectrometry. J. Anal. At. Spectrom. 5 (1990) 339
323. Kujirai O., Yamada K., and Hasegawa R. Simultaneous determination of trace impurities in high-purity chromium metal and chromium disilicide by inductively coupled plasma atomic emission spectrometry after coprecipitation. J. Anal. At. Spectrom. 8 (1993) 481
324. Zucheng J., and Schramel P. Determination of trace amounts of molybdenum in water samples by inductively coupled plasma atomic emission spectrometry after cobalt-dithiocarbamate coprecipitation. Fresenius J. Anal. Chem. 343 (1992) 600
325. Pretty J.R., Duckworth D.C., and Van Berkel G.J. Electrochemical sample pretreatment coupled on-line with ICP-MS: analysis of uranium using an anodically conditioned glassy carbon working electrode. Anal. Chem. 70 (1998) 1141
326. Yuan D., Wang X., Yang P., and Huang B. On-line electrolytic dissolution of alloys and multi-element determination by inductively coupled plasma atomic emission spectrometry. Anal. Chim. Acta 251 (1991) 187
327. Gluodenis Jr. T.J., and Tyson J.F. Flow injection systems for directly coupling on-line digestions with analytical atomic spectrometry, Part 2. Reactions in a microwave field. J. Anal. At. Spectrom. 8 (1993) 697
328. Cabrera C., Madrid Y., and Camara C. Determination of lead in wine, other beverages and fruit slurries by flow injection hydride generation atomic absorption spectrometry with on-line microwave digestion. J. Anal. At. Spectrom. 9 (1994) 1423
329. Haswell S.J. Development and operating characteristics of micro flow injection analysis systems based on electroosmotic flow. Analyst 122 (1997) 1R
330. Ruzicka J., and Hansen E.H. Flow injection analysis: From beaker to microfluidics. Anal. Chem. 72 (2000) 212A