Cogging torque of permanent magnet electric machiens: An overview

Canadian Conference on Electrical and Computer Engineering

Volumn , Issue , 2009, Pages 1172-1177

  Guo, Zhenhong ^a   Chang, Liuchen ^a   Xue, Yaosuo ^a  

^a UNIVERSITY OF NEW BRUNSWICK   (Canada)

Author keywords

Analytical analysis; Cogging torque; FEM; PMEM

Indexed keywords

ANALYTICAL ANALYSIS; COGGING TORQUE; COGGING TORQUE CALCULATION; DESIGN SPECIFICATION; ELECTRIC MACHINES; FEM; MAGNET POLES; PMEM; STATOR TOOTH;

ELECTRIC MACHINERY; FINITE ELEMENT METHOD; MAGNETIC DEVICES; PERMANENT MAGNETS; SAFETY FACTOR;

TORQUE;

EID: 70350233600     PISSN: 08407789     EISSN: None     Source Type: Conference Proceeding    
DOI: 10.1109/CCECE.2009.5090310     Document Type: Conference Paper

References (41)

1. Liuchen Chang, Quincy Wang and Pinggang Song, "Application of Finite Element Method in Design of a 50kW Direct Drive Synchronous Generator for Variable Speed Wind Turbine", IPEMC 2004, Vol. 2, Aug. 14-16, 2004, pp:591 - 596.
2. Renyuan Tang, GuangRen Xu, Zhenhong Guo, et al., Modern Permanent Magnet Machines, Theory and Design, Mechanical Industry Press, 1997.
3. Zhenhong Guo and Liuchen Chang, "FEM study on permanent magnet synchronous generators for small wind turbines", Proceedings of CCECE'05, 1-4 May 2005 Page(s):641 - 644
4. Zhenhong Guo, Liuchen Chang, "Calculation and study on cogging torque of small wind turbine PMSG", Proceedings of CCECE'08, Page(s): 589-594.
5. Yubo Yang, Xiuhe Wang, et al., "The optimization of pole arc coefficient to reduce cogging torque in surface-mounted permanent magnet motors", IEEE Trans. On Magnetics, Vol. 42, No. 4, pp. 1135-1138, 2006.
6. R. Carlson, A. A. Tavares, et al., "Torque Ripple Attenuation in Permanent Magnet Synchronous Motors", Conference Record of the 1989 IEEE Industry Applications Society Annual Meeting, Vol.1, pp.57-62.
7. G. Sooriyakumar, R. Perryman and S. J. Dodds, "Improved Cogging Calculation Methods for Surface Mounted Permanent Magnet Synchronous Motors", Proceedings of the 41st International Universities Power Engineering Conference, 2006, UPEC'06, pp. 753-757.
8. G. Sooriyakumar, R. Perryman and S. J. Dodds, "Cogging Analysis for Fractional Slot/Pole Permanent Magnet Synchronous Motors", Proceedings of the 42nd International Universities Power Engineering Conference, 2007, UPEC'07, pp. 188-191.
9. Yongping Lu, Yong Li, "Tooth-slot cogging torque and noise analysis of permanent magnet motors", Proceedings of the 5th International Conference on Electrical Machines and Systems, August 2001, Vol.2, pp. 860-826.
10. A. B. Proca, A. K.Keyhani, et al., "Analytical Model for Permanent Magnet Motors with Surface Mounted Magnets", IEEE Trans. On Energy Conversion, Vol. 18, No. 3, 2003, pp. 386-391.
11. Lijian Wu, Wanbing Jin et al, "A Cogging Torque Reduction Method for Surface Mounted Permanent Magnet Motor", Proceedings of ICEMS'07, pp.769-773.
12. Jacek F. Gieras, "Analytical Approach to Cogging Torque Calculation of PM Brushless Motors", IEEE Transactions on Industry Applications, Vol. 40, No.5, 2004, pp.1310-1316.
13. Yubo Yang, Xiuhe Wang, et al., "Reducing Cogging Torque in Surface-Mounted Permanent Magnet Motors by Teeth Nothing", 2nd IEEE Conference on Industrial Electronics and Applications, 2007. ICIEA 2007., pp.265-268.
14. Ramdane Lateb, Moureddine Takorabet and Farid Meibody-Tabar, "Effect of Magnet Segmentation on the Cogging Torque in Surface-Mounted Permanent-Magnet Motors", IEEE Transactions on Magnetics, Vol. 42, No.3, 2006, pp.442-445.
15. Touzhu Li and Gordon Slemon, "Reduction of Cogging Torque in Permanent Magnet Motors", IEEE Transactions on Magnetics, Vol. 24, No. 6, 1988, pp.2901-2903.
16. Gyu-Hong Kang, Jin Hur, "Analytical Prediction and Reduction of the Cogging Torque in Interior Permanent Magnet Motor", 2005 IEEE International Conference on Electric Machines and Drives, pp. 1620-1624, 2005.
17. Z. Q. Zhu, D. Howe, et al., "Instantaneous magnetic field distribution in brushless permanent magnet motors, part I: Open-circuit Field", IEEE Transactions on Magnetics, Vol.29, No. 1, pp.124-134, 1993.
18. Z. Q. Zhu, D. Howe, "Instantaneous magnetic field distribution in brushless permanent magnet motors, part III: Effect of stator slotting", IEEE Transactions on Magnetics, Vol. 29, No. 1, pp.143-151, 1993.
19. Damir Zarko, Drago Ban and T. A. Lipo, "Analytical Solution for Cogging Torque in Surface Permanent-Magnet Motors Using Conformal Mapping", IEEE Transactions on Magnetics, Vol. 44, No. 1, 2008, pp.52-65.
20. J. Steinbrink, "Analytical Determination of the Cogging Torque in Brushless Motors Excited by Permanent Magnets", IEEE international Conference on Electric Machines & Drives, 2007. IEMDC '07. Vol. 1, pp.172-177.
21. Z. J. Liu, J. T. Li and M. A. Jabbar, "Cogging Torque Prediction by Superposition of Torque due to Pole Transition over Slot", IEEE International Conference on Electric Machines and Drives, 2005, pp. 1219-1224.
22. Z. Q. Zhu, S. Ruangsinchaiwanich and D. Howe, "Synthesis of Cogging Torque Waveform from Analysis of a Single Stator Slot", 2005 IEEE International Conference on Electric Machines and Drives, pp.125-130, 2005.
23. Sang-Moon Hwang, Jae-Boo Eom, et al., "Various Design Techniques to Reduce Cogging Torque by Controlling Energy Variation in Permanent Magnet Motors", IEEE Trans on Magn., Vol.37, No. 4, 2001, pp.2806-2809.
24. Nishiguchi, I.; Kameari, A. and Haseyama, K., "On the local force computation of deformable bodies in magnetic field", IEEE Trans. on Magnetics, Vol. 35, No.3, pp.1650-1653, 1999.
25. Guo, Y.G. and Zhu, J.G., "Improved Methods for Force and Torque Calculation in Electrical Machines by 3D FE Analysis", Proceedings of the Fifth International Conference on Electrical Machines and Systems, pp.1191-1194, Vol.2, 2001.
26. L. Chang, A. R. Eastham and G. E. Dawson, "Permanent Magnet Synchronous Motors: Finite Element Torque Calculations", IEEE IAS Annual Meeting 89, pp.69-73.
27. Mizia, J.; Adamiak, K.; Eastham, A.R.; Dawson, G.E., "Finite element force calculation: comparison of methods for electric machines", IEEE Trans. on Magnetics, Vol. 24, No. 1, pp.447-450, 1988.
28. M. Miwa, D. Dibben and T. Yamada, "High Accuracy Torque Calculation for a Rotating Machine Using Adaptive Meshing", IEEE Transactions on Magnetics, Vol. 40, No. 2, pp. 1001-1004, 2004.
29. Y. Kawaguchi, T. Sato, et al., "A Reduction Method of Cogging Torque for IPMSM", Proceedings of ICEMS2005, Vol.1, pp.248-250.
30. Dong-Hun Kim, Il-Han Park, et al., "Optimal Shape Deisng of Iron Core to Reduce Cogging Torque of IPM Motor", IEEE Transactions on Magetics, Vol. 39, No. 3, 2003, pp.1456-1459.
31. Masashi Kitamura, Yuji Enomoto, Junya Kaneda, and Mathahiro Komuro, "Cogging Torque Due to Roundness Errors of the Inner Stator Core Surface", IEEE Transactions on Magnetics, Vol. 39, No.3, 2003, pp.1622-1625.
32. Z. Q. Zhu, S. Ruangsinchaiwanich, et al., "Reduction of Cogging Torque in Interior-Magnet Brushless Machines", IEEE Transactions on Magnetics, Vol. 39, No.5, 2003, pp.3238-3240
33. Zhenhong Guo, Renyuan Tang, Yanzhong Wu, Tuan Lin, "Comparison on Various PMSM Rotor Geometries", Proceedings of CICEM'95, Hangzhou, P. R. China, 1995: 381-383
34. Qing Zhao, Xiulian Wang, et al., "Study and design for large line-start permanent magnet synchronous motors", Proceedings of ICEMS2003, 6th International Converence on Electrical Machines and Systems, Nov. 9-11, 2003, Vol. 1, pp132-133.
35. Nicola Bianchi and Silverio Bolognani, "Design Techniques for Reducing the Cogging Torque in Surface-Mounted PM Motors", IEEE Transactions on Industry Applications, Vol. 38, No.5, 2002, pp.1259-1265.
36. Chenyuan Wang, Meiwen Zhou and Qingdin Guo, Vector Control of AC Servo Motors, Mechanical Industry Press, 1995.
37. Zhenhong Guo, Renyuan Tang, Yanzhong Wu, Wenbin Wan, "Study on Noload Air-gap Flux Density Waveform of PMSM", Proceedings of CICEM'99, Xi'an, P. R. China, 1999: 199-202
38. E. R. Braga Filho and A. M. N. Lima, "Reducing Cogging Torque in Interior Permanent Magnet Machines without Skewing", IEEE Transactions on Magnetics, Vol. 34, No. 5, pp. 3652-3655, 1998
39. Anton Hamler, Bozidar Hribernik, "Impact of shape of stator pole of one phase brushless motor on cogging torque", IEEE Trans. on Magnetics, Vol. 32, no. 3, 1996, pp. 1545-1548.
40. Tae Kyuang Chung and Suk Ki Kim, "Optimal pole shape design for the reduction of cogging torque of brushless dc motor using evolution strategy", IEEE Trans. on Magnetics, Vol. 33, No. 2, 1997, pp.1908-1911
41. Jang-Sung Chun and Hyun-Kyo Jung, "Shape optimization of closed slot type PM motors for cogging torque reduction using evolution strategy", IEEE Trans. on Magn., Vol. 33, No.2, 1997, pp.1912-1915.