A conical indentation technique based on fea solutions for property evaluation

Transactions of the Korean Society of Mechanical Engineers, A

Volumn 33, Issue 9, 2009, Pages 859-869

  Hyun, Hong Chul ^a   Kim, Minsoo ^a   Lee, Jin Haeng ^a   Lee, Hyungyil ^a  

^a NONE

Author keywords

Conical indenter; Dual conical Indentation; FEM; Tip radius

Indexed keywords

FINITE ELEMENT METHOD; STRAIN HARDENING; STRESS-STRAIN CURVES; TUNGSTEN CARBIDE;

CONICAL INDENTATION; CONICAL INDENTATION TESTS; CONICAL INDENTERS; LOAD-DEFLECTION CURVE; PROPERTY EVALUATION; SELF-SIMILARITIES; STRAIN-HARDENING EXPONENT; TIP RADIUS;

INDENTATION;

EID: 70350123299     PISSN: 12264873     EISSN: 22885226     Source Type: Journal    
DOI: 10.3795/KSME-A.2009.33.9.859     Document Type: Article

References (24)

1. Giannakopoulos, A. E., Larsson, P.-L. and Vestergaard, R., 1994, "Analysis of Vickers Indentation," International Journal of Solids and Structures, Vol. 31, pp. 2679-2708.
2. Larsson, P. -L., Giannakopoulos, A. E., Soderlund, E., Rowcliffe, D. J. and Vestergaard, R., 1996, "Analysis of Berkovich Indentation," International Journal of Solids and Structures, Vol. 33, pp. 221-248.
3. Taljat, B., Zacharia, T. and Kosel, F., 1997, "New Analytical Procedure to Determine Stress-Strain Curve from Spherical Indentation Data," International Journal of Solids and Structures, Vol. 35, pp. 4411-4426.
4. Giannakopoulos, A. E. and Suresh, S., 1999, "Determination of Elastoplastic Properties by Instrumented Sharp Indentation," Scripta Materialia, Vol. 40, pp. 1191-1198.
5. Dao, M, Chollacoop, N., Van Vliet, K. J., Venkatesh, T. A. and Suresh, S., 2001, "Computational Modeling of the Forward and Reverse Problems in Instrumented Sharp Indentation," Acta Materialia, Vol. 49, pp. 3899-3918.
6. Lee, J. H. and Lee, H., 2006, "An Indentation Method Based on FEA for Equi-biaxial Residual Stress Evaluation," Transactions of KSME, Vol. 30, No. 1, pp. 42-51.
7. Lee, J. H., 2006, A Numerical Approach and Experimental Verification of the Indentation Techniques for Material Property and Residual Stress Evaluation, Ph. D. Dissertation, Department of Mechanical Engineering, Sogang University.
8. Shim, S., Oliver, W. C. and Pharr, G. M., 2007, "A Comparison of 3D Finite Element Simulation for Berkovich and Conical Indentation of Fused Silica,"International Journal of Surface Science and Engineering, Vol. 1, pp. 259-273.
9. Lee, J. H., Yu, H. S. and Lee, H., 2007, "A Numerical Approach to Indentation Techniques for Thin-film Property Evaluation," Transactions of KSME, Vol. 31, No. 3, pp. 313-321.
10. Xu, Z. -H. and Li, X., 2008, "Effect of Indenter Geometry and Material Properties on the Correction Factor of Sneddon's Relationship for Nanoindentation of Elastic-plastic Materials," Acta Materialia, Vol. 56, pp. 1399-1405.
11. Lee, J. Lee, J. H., Lee, H. and Pharr, G M., 2005, "A Numerical Approach to Spherical Indentation Tech-niques for Material Property Evaluation," Journal of the Mechanics and Physics Solid, Vol. 53, pp. 2037- 2069.
12. Lee J.H. and Lee, H., 2007, "Enhanced Spherical Indentation Techniques for Property Evaluation," Transactions of KSME, Vol. 31, No. 43, pp. 461-471.
13. Cheng, Y. T. and Cheng, C. M., 1998, "Scaling Approach to Conical Indentation in Elasto-plastic Solids with Work Hardening," Journal of Applied Physics, Vol. 84, pp. 1284-1291.
14. Capehart,T.W.,Cheng,Y.-T.,2003, "Determination Constitutive Models from Conical Indentation: Sensitivity Analysis," Journal of Materials Research, Vol. 18, pp. 827-832
15. Tho, K. K., Swaddiwudhipong, S., Liu, Z. S., Zeng, K., Hua, J., 2004, "Uniqueness of Reverse Analysis from Conical Indentation Test," Journal of Materials Research, Vol. 19, pp. 2498-2502.
16. Chen, X., Ogasawara, N., Zhao, M. and Chiba, N., 2007, "On the Uniqueness of Measuring Elastoplastic Properties from Indentation: The Indistinguishable Mystical Materials," Journal of the Mechanics and Physics Solid, Vol. 55, pp. 1618 -1660. (Pubitemid 46978407)
17. Lee, J. H., Lee, H. and Kim, D. H., 2008, "A Numerical Approach to Elastic Modulus Evaluation Using Conical Indenter with Finite Tip Radius," Journal of Materials Research, Vol. 23, No. 1, pp. 2528-2537.
18. Chollacoop, N., Dao, M. and Suresh, S., 2003, "Depth-sensing Instrumented Indentation with Dual Sharp Indenters," Acta Materialia, Vol. 51, pp. 3713-3 729.
19. Bucaille, J. L., Stauss, S., Felder, E. and Michler, J., 2003, "Determination of Plastic Properties of Metals by Instrumented Indentation Using Different Sharp Indenters," Acta Materialia, Vol. 51, pp. 1663-1678.
20. ABAQUS User's Manual, 2005, Version 6.5, Hibbitt, Karlsson and Sorensen, Inc., Pawtucket, RI.
21. Sneddon, I. N., 1965, "The Relation between Load and Penetration in the Axisymmetric Boussinesq Problem for a Punch of Arbitrary Profile," International Journal of Engineering Science, Vol. 3, pp. 47-57.
22. Pharr, G M., Oliver, W. C. and Brotzen, F. R., 1992, "On the Generality of the Relationship among Contact Stiffness, Contact Area and Elastic Modulus during Indentation," Journal of Material Research, Vol. 7, pp. 613-617.
23. Rice, J. R. and Rosengren, G F., 1968, "Plane Strain Deformation Near a Crack-tip in a Power Law Hardening Material," Journal of the Mechanics and Physics of Solids, Vol. 16, pp. 1-12.
24. Hyun, H. C, Lee, J. H. and Lee, H., 2008, "Mathematical Expressions for Stress-strain Curve of Metallic Material," Transactions of KSME, Vol. 32, No. 1, pp. 21-28.