Upper Bound limit analysis model for FRP-reinforced masonry curved structures. Part I: Unreinforced masonry failure surfaces

Computers and Structures

Volumn 87, Issue 23-24, 2009, Pages 1516-1533

  Milani, Gabriele ^a   Milani, Enrico ^b   Tralli, Antonio ^b  

^a POLITECNICO DI MILANO   (Italy)

^b UNIVERSITY OF FERRARA   (Italy)

Author keywords

3D analysis; Curved structures; Kinematic approach; Limit analysis; Macroscopic strength domain; Masonry

Indexed keywords

3D ANALYSIS; CURVED STRUCTURES; LIMIT ANALYSIS; MACROSCOPIC STRENGTH DOMAIN; MASONRY;

BRICK; BRICKMAKING; BUILDING MATERIALS; CELL MEMBRANES; FIBER REINFORCED PLASTICS; KINEMATICS; KNOWLEDGE BASED SYSTEMS; MORTAR; REINFORCED PLASTICS; THREE DIMENSIONAL;

FOUNDATIONS;

EID: 70349997027     PISSN: 00457949     EISSN: None     Source Type: Journal    
DOI: 10.1016/j.compstruc.2009.07.007     Document Type: Article

References (46)

1. Corradi M., Borri A., and Vignoli A. Strengthening techniques tested on masonry structures struck by the Umbria-Marche earthquake of 1997-1998. Constr Build Mater 16 (2002) 229-239
2. Schwegler G. Masonry construction strengthened with composites in seismically endangered zone. In: Proceedings of the 10th European conference on earthquake engineering, Wien; 1994. p. 2299-303.
3. Eshani MR. Strengthening of earthquake damaged masonry structures with composite materials. In: Proceedings of the nonmetallic (FRP) reinforcement for concrete structures. Proceedings of the 2nd international RILEM symposium FRPRCS-2; 1997. p. 681-7.
4. Saadmantesh H. Fiber composites of new and existing structures. ACI Struct J 91 3 (1991) 346-354
5. Luciano R., and Sacco E. Damage of masonry panels reinforced by FRP sheets. Int J Solids Struct 35 15 (1998) 1723-1741
6. Marfia S., and Sacco E. Modelling of reinforced masonry elements. Int J Solids Struct 38 (2001) 4177-4198
7. Triantafillou T.C. Composites: a new possibility for the shear strengthening of concrete, masonry and wood. Compos Sci Technol 58 (1998) 1285-1295
8. Triantafillou T.C., and Fardis M.N. Strengthening of historic masonry structures with composite materials. Int J Mater Struct (1997) 30
9. CNR-DT200 2006. Guide for the design and construction of externally bonded FRP systems for strengthening existing structures. C.N.R., National Research Council, Italy; 2006.
10. Huerta S. Mechanics of masonry vaults: the equilibrium approach. In: Lourenço PB, Roca, P, editors. Proceedings of the historical constructions, Guimarães, PT; 2001.
11. Heyman J. The safety of masonry arches. Int J Mech Sci 43 (1969) 209-224
12. Heyman J. Equilibrium of shell structures (1977), Oxford University Press, Oxford
13. Heyman J. The masonry arch (1982), John Wiley & Sons
14. Caporale A., Luciano R., and Rosati L. Limit analysis of masonry arches with externally bonded FRP reinforcements. Comput Methods Appl Mech Eng 196 (2006) 247-260
15. Gazzola EA, Drysdale RG, Essawy AS. Bending of concrete masonry walls at different angles to the bed joints. In: Proceedings of the 3rd North American Masonry Conference, Arlington, Texas, USA, Paper 27; 1985.
16. Sinha B.P. A simplified ultimate load analysis of laterally loaded model orthotropic brickwork panels of low tensile strength. J Struct Eng ASCE 56B 4 (1978) 81-84
17. Milani G., Lourenço P.B., and Tralli A. Homogenization approach for the limit analysis of out-of-plane loaded masonry walls. J Struct Eng 132 10 (2006) 1650-1663
18. Page A.W. A biaxial failure criterion for brick masonry in the tension-tension range. Int J Masonry Constr 1 (1981) 26-30
19. de Buhan P., and de Felice G. A homogenisation approach to the ultimate strength of brick masonry. J Mech Phys Solids 45 7 (1997) 1085-1104
20. Milani G., Lourenço P.B., and Tralli A. Homogenised limit analysis of masonry walls. Part I: failure surfaces. Comput Struct 84 (2006) 166-180
21. Luciano R., and Sacco E. Homogenization technique and damage model for old masonry material. Int J Solids Struct 34 4 (1997) 3191-3208
22. Pegon P., and Anthoine A. Numerical strategies for solving continuum damage problems with softening: application to the homogenization of masonry. Comput Struct 64 4 (1997) 623-642
23. Massart T., Peerlings R.H.J., and Geers M.G.D. Mesoscopic modeling of failure and damage-induced anisotropy in brick masonry. Eur J Mech A/Solids 23 (2004) 719-735
24. Lourenço P.B., and Rots J. A multi-surface interface model for the analysis of masonry structures. J Eng Mech ASCE 123 7 (1997) 660-668
25. Lourenço P.B., de Borst R., and Rots J. A plane stress softening plasticity model for orthotropic materials. Int J Numer Methods Eng 40 (1997) 4033-4057
26. Anthoine A. Derivation of the in-plane elastic characteristics of masonry through homogenisation theory. Int J Solids Struct 32 2 (1995) 137-163
27. Milani G., Lourenço P.B., and Tralli A. Homogenised limit analysis of masonry walls. Part II: structural examples. Comput Struct 84 (2006) 181-195
28. Begg D, Fishwick R. Numerical analysis of rigid block structures including sliding. In: Middleton J, Pande G, editors. Computer methods in structural masonry, vol. 3; 1995. p. 177-83.
29. Ferris M., and Tin-Loi F. Limit analysis of frictional block assemblies as a mathematical program with complementarity constraints. Int J Mech Sci 43 (2001) 209-224
30. Milani G. Homogenized limit analysis of FRP-reinforced masonry walls out-of-plane loaded. Comput Mech 43 5 (2009) 617-639
31. D'Ayala D, Casapulla C. Limit state analysis of hemispherical domes with finite friction. In: Lourenço PB, Roca P, editors. Proceedings of the historical constructions, Guimarães, PT; 2001.
32. Suquet P. Analyse limite et homogeneisation. CR Acad Sci IIB- Mech 296 (1983) 1355-1358
33. Andrianov I.V., Verbonol V.M., and Awrejcewicz J. Buckling analysis of discretely stringer-stiffened cylindrical shells. Int J Mech Sci 48 (2006) 1505-1515
34. Habbal A. An effective model for Lipschitz wrinkled arches. J Math Anal Appl 285 (2003) 155-173
35. Cecchi A., Milani G., and Tralli A. A Reissner-Mindlin limit analysis model for out-of-plane loaded running bond masonry walls. Int J Solids Struct 44 5 (2007) 1438-1460
36. Milani E., Milani G., and Tralli A. Limit analysis of masonry vaults by means of curved shell finite elements and homogenization. Int J Solids Struct 45 (2008) 5258-5288
37. Orduña A., and Lourenço P.B. Cap model for limit analysis and strengthening of masonry structures. J Struct Eng 129 10 (2003) 1367-1375
38. Orduña A., and Lourenço P.B. Three-dimensional limit analysis of rigid blocks assemblages. Part I: Torsion failure on frictional joints and limit analysis formulation. Int J Solids Struct 42 18-19 (2005) 5140-5160
39. Zienkiewicz O.C., and Taylor R.L. The finite element method. Basic formulations and linear problems vol. I (1989), McGraw-Hill, London
40. Vermeltfoort AV. Analysis and experiments of masonry arches. In: Lourenço PB, Roca, P, editors. Proceedings of the historical constructions, Guimarães, PT; 2001.
41. Faccio P., Foraboschi P., and Siviero E. Masonry vaults reinforced with FPR strips [In Italian: Volte in muratura con rinforzi in FRP]. L'Edilizia 7/8 (1999) 44-50
42. Foraboschi P. Strengthening of masonry arches with fiber-reinforced polymer strips. J Compos Constr 8 (2004) 191-202
43. Foraboschi P. Masonry structures externally reinforced with FRP strips: tests at the collapse. In: Proceeding of the I Convegno Nazionale "Sperimentazioni su Materiali e Strutture", Venice; 2006 [in Italian].
44. DIANA 9.3 version user's manual, TNO Building and Construction Research, Department of Computational Mechanics, Delft, The Netherlands; 2008.
45. Creazza G., Saetta A., Matteazzi R., and Vitaliani R. Analyses of masonry vaults: a macro approach based on three-dimensional damage model. J Struct Eng 128 5 (2002) 646-654
46. Creazza G, Saetta A, Matteazzi R, Vitaliani R. Analyses of masonry vaulted structures by using a 3-D damage model. In: European congress on computational methods in applied sciences and engineering, ECCOMAS 2000, Barcelona, SP; 2000.