The tribological mechanism of poly(vinylidene fluoride) composites reinforced with carbon fibers

Polymer - Plastics Technology and Engineering

Volumn 48, Issue 6, 2009, Pages 646-651

  Li, J ^a   Yang, X H ^a  

^a SHANGHAI SECOND POLYTECHNIC UNIVERSITY   (China)

Author keywords

Poly(vinylidene fluoride) (PVDF); SEM; Tribological; Wear reduction

Indexed keywords

DRY SLIDING; POLY(VINYLIDENE FLUORIDE); POLY(VINYLIDENE FLUORIDE) (PVDF); POLY(VINYLIDENE FLUORIDE) COMPOSITES; POLYIMIDE COMPOSITES; POLYVINYLIDENE FLUORIDES; REPRESENTATIVE TESTING; SEM; TRIBOLOGICAL; TRIBOLOGICAL CHARACTERISTICS; TRIBOLOGICAL MECHANISM; TRIBOLOGICAL PERFORMANCE; TRIBOLOGICAL PROPERTIES; WEAR MECHANISMS; WEAR REDUCTION; WORN SURFACE MORPHOLOGY;

FIBERS; POLYIMIDES; REINFORCED PLASTICS; REINFORCEMENT; SCANNING ELECTRON MICROSCOPY; TRIBOLOGY;

CARBON FIBERS;

CARBON FIBER; FIBER REINFORCED COMPOSITE; MORPHOLOGY; POLYIMIDE; POLYVINYLIDENE FLUORIDE; TRIBOLOGY; WEAR;

EID: 70349943969     PISSN: 03602559     EISSN: 15256111     Source Type: Journal    
DOI: 10.1080/03602550902824507     Document Type: Article

References (30)

1. Henshaw, J.M.; Han, W.J.; Owens, A.D. An overview of recycling issues for composite materials. J. Thermoplast. Compos. Mater. 1996, 1, 4-20.
2. Svensson, N.; Shishoo, R.; Gilchrist, M. Manufacturing of thermoplastic composites from commingled yarns - a review. J. Thermoplast. Compos. Mater. 1998, 11, 22-56.
3. Priya, L.; Jog, J.P. Poly(vinylidene fluoride)=clay nanocomposites prepared by melt intercalation: Crystallization and dynamic mechanical behavior studies. J. Polym. Sci. B 2002, 40 (15), 1682-1689.
4. Drobny, J.G. Blends and composites based on fluoropolymers. Macromol. Symp. 2001, 170, 149-156.
5. Bijwe, J.; Logani, C.M.; Tewari, U.S. Influence of fillers and fiber reinforcement on abrasive wear of some polymeric composites. Wear 1990, 138, 70
6. Mcgee, A.C.; Dharan, C.K.H.; Finnie, I. Abrasive wear of graphite fiber-reinforced polymer composite materials. Wear 1987, 114, 97.
7. Yoo, J.H.; Eiss, N.S. Tribological behaviour of blends of poly(ether ether ketone) and poly(ether imide). Wear 1993, 162, 418.
8. Bijwe, J.; Indumathi, J.; Rajesh, J.J.; Fahim, M. Friction and wear behaviour of polyetherimide composites in various wear modes. Wear 2001, 249, 715.
9. Xian, G.; Zhang, Z. Sliding wear of polyetherimide matrix composites. II: Influence of graphite flakes. Wear 2005, 258, 776.
10. Palabiyik, M.; Bahadur, S. Tribological studies of polyamide 6 and high density polyethylene blends filled with PTFE and coper oxide and reinforced with short glass fibers. Wear 2002, 253, 369.
11. Friedrich, K.; Lu, Z.; Hager, A.M. Recent advances in polymer composites' tribology. Wear 1995, 190, 139.
12. Bahadur, S.; Fu, Q.; Dong, D. The effect of reinforcement and the synergism between CuS and carbon fiber on the wear of nylon. Wear 1994, 178, 123.
13. Wang, J.; Gu, M.; Songhao, B.; Ge, S. The role of copper composites as fillers in the transfer film formation and wear of Nylon. Wear 2003, 255, 774.
14. Ibarra, L.; Panos, D.J. Dynamic properties of thermoplastic butadiene-styrene (SBS) and oxidized short carbon fiber composite materials. Appl. Polym. Sci. 1998, 67, 1819.
15. Amash, A.; Zugenmaier, P. Thermal and dynamic mechanical investigations on fiber-reinforced polypropylene composites. J. Appl. Polym. Sci. 1997, 63, 1143.
16. Lu, Z.P.; Friedrich, K. On sliding friction and wear of PEEK and its composites. Wear 1995, 181-183, 624.
17. Simm, W.; Freti, S. Abrasive wear of multiphase materials. Wear 1989, 129, 105.
18. Thorp, J.M. Abrasive wear of some commercial polymers. Tribol. Int. 1982, 15, 59.
19. Liu, J. Material Wear Principle and Wear Resistance, Tsinghua University Press: Beijing, 1993.
20. Flock, J.; Friedrich, K.; Yuan, Q. On the friction and wear behaviour of Pan-and pitch-carbon fiber reinforced PEEK composites. Wear 1999, 225-229, 304.
21. Kukureka, S.N.; Hooke, C.J.; Rao, M.; Liao, P.; Chen, Y.K. The effect of fibre reinforcement on the friction and wear of polyamide 66 under dry rolling-sliding contact. Tribol. Int. 1999, 32, 107.
22. Lhymn, C.; Tempelmeyer, K.E.; Davis, P.K. Abrasive wear of short fiber composites. Composites 1985, 16, 127.
23. Pihtili, H.; Tosun, N. Effect of load and speed on the wear behaviour of woven glass fabrics and aramid fibre-reinforced composites. Wear 2002, 252, 979.
24. Reinicke, R.; Haupert, F.; Friedrich, K. On the tribological behavior of selected, injection moulded thermoplastic composites. Composites A 1998, 29, 763.
25. Zhang, G.; Liao, H.; Li, H.; Mateus, C.; Bordes, J.M.; Coddet, C. On dry sliding friction and wear behaviour of PEEK and PEEK/SiCcomposite coatings. Wear 2006, 260, 594.
26. Li, J.; Liao, H.; Coddet, C. Friction and wear behavior of flamesprayed PEEK coatings. Wear 2002, 252, 824.
27. Hanmin, Z.; Guoren, H.; Guicheng, Y. Friction and wear of poly(phenylene sulphide) and its carbon fibre composites: I unlubricated. Wear 1987, 116, 59.
28. Friedrich, K.; Flock, J.; Varadi, V.; Neder, Z. Experimental and numerical evaluation of the machanical properties of compacted wear debris layers formed between composites and steel surfaces in sliding contact. Wear 2001, 251, 12.
29. Jahanmir, S.; Suh, N.P. An overview of the delamination theory of wear. Wear 1997, 44, 17.
30. Hu, M.S. Some effect of particle size on the flow behaviour of Al-SiCp composites. Scripta Metall. 1991, 25, 695.