Deposition and investigation of functionally graded calcium phosphate coatings on titanium

Acta Biomaterialia

Volumn 5, Issue 9, 2009, Pages 3563-3572

  Bai, Xiao ^a   Sandukas, Stefan ^a   Appleford, Mark R ^b   Ong, Joo L ^b   Rabiei, Afsaneh ^a  

^a North Carolina State University   (United States)

^b University of Texas at San Antonio   (United States)

Author keywords

Adhesion strength; Bioactivity; Biomedical implants; Calcium phosphate coatings

Indexed keywords

ADHESION; BOND STRENGTH (MATERIALS); CALCIUM PHOSPHATE; CELL CULTURE; ELASTIC MODULI; FOURIER TRANSFORM INFRARED SPECTROSCOPY; HIGH RESOLUTION TRANSMISSION ELECTRON MICROSCOPY; INTERFACES (MATERIALS); ION BEAMS; PHOSPHATE COATINGS; QUALITY CONTROL; SUBSTRATES; THICKNESS MEASUREMENT; X RAY DIFFRACTION;

BIOMEDICAL IMPLANTS; CALCIUM-PHOSPHATE COATINGS; COATING THICKNESS; CRISTALLINITY; DEGREE OF CRYSTALLINITY; FUNCTIONALLY GRADED; ION BEAM-ASSISTED DEPOSITION; PROCESSING PARAMETERS; TITANIA; TITANIUM SUBSTRATES;

X RAY PHOTOELECTRON SPECTROSCOPY;

CALCIUM PHOSPHATE; INTEGRIN; TITANIUM;

ANALYTIC METHOD; ARTICLE; CELL ADHESION; CONTROLLED STUDY; HARDNESS; HUMAN; HUMAN CELL; HUMAN CELL CULTURE; IMMUNOFLUORESCENCE; INFRARED SPECTROSCOPY; MATERIAL COATING; MESENCHYME CELL; OSTEOBLAST; PRIORITY JOURNAL; PROTEIN EXPRESSION; TEMPERATURE; THICKNESS; TRANSMISSION ELECTRON MICROSCOPY; X RAY PHOTOELECTRON SPECTROSCOPY;

EID: 70349883803     PISSN: 17427061     EISSN: None     Source Type: Journal    
DOI: 10.1016/j.actbio.2009.05.013     Document Type: Article

References (29)

1. Shi D., and Wen X. Bioactive ceramics: structure, synthesis, and mechanical properties. In: Shi D. (Ed). Introduction to biomaterials (2006), Tsinghua University Press, World Scientific, Beijing, Singapore, Hackensack, NJ 13
2. Yaszemski M.J. Biomaterials in orthopedics (2004), Marcel Dekker, New York
3. Ducheyne P. Bioceramics-material characteristics versus in vivo behavior. J Biomed Mater Res A 21 (1987) 219
4. Hench L.L. Bioceramics. J Am Ceram Soc 81 (1998) 1705
5. Suchanek W., and Yoshimura M. Processing and properties of hydroxyapatite-based biomaterials for use as hard tissue replacement implants. J Mater Res 13 (1998) 94
6. Yang Y.Z., Kim K.H., and Ong J.L. Review on calcium phosphate coatings produced using a sputtering process-an alternative to plasma spraying. Biomaterials 26 (2005) 327
7. Ong J.L., and Chan D.C.N. Hydroxyapatite and their use as coatings in dental implants: a review. Crit Rev Biomed Eng 28 (2000) 667a
8. Zhao B.H., Lee I.S., Bai W., Cui F.Z., and Feng H.L. Improvement of fibroblast adherence to titanium surface by calcium phosphate coating formed with IBAD. Surf Coat Technol 193 (2005) 366
9. Luo Z.S., Cui F.Z., Feng Q.L., Li H.D., Zhu X.D., and Spector M. In vitro and in vivo evaluation of degradability of hydroxy apatite coatings synthesized by ion beam-assisted deposition. Surf Coat Technol 131 (2000) 192
10. Xue W.C., Tao S.Y., Liu X.Y., Zheng X.B., and Ding C.X. In vivo evaluation of plasma sprayed hydroxyapatite coatings having different crystallinity. Biomaterials 25 (2004) 415
11. Chou L., Marek B., and Wagner W.R. Effects of hydroxylapatite coating crystallinity on biosolubility, cell attachment efficiency and proliferation in vitro. Biomaterials 20 (1999) 977
12. Filiaggi M.J., Pilliar R.M., and Coombs N.A. Post-plasma-spraying heat-treatment of the HA coating/Ti-6Al-4V implant system. J Biomed Mater Res 27 (1993) 191
13. Zhang Q., Chen J., Feng J., Cao Y., Deng C., and Zhang X. Dissolution, mineralization behaviors of HA coatings. Biomaterials 24 (2003) 4741
14. Limin Sun C.C.B., Gross Karlis A., and Ahmet K. Material fundamentals and clinical performance of plasma-sprayed hydroxyapatite coatings: a review. J Biomed Mater Res A 58 (2001) 570
15. Whitehead R.Y., Lacefield W.R., and Lucas L.C. Structure and integrity of a plasma-sprayed hydroxylapatite coating on titanium. J Biomed Mater Res 27 (1993) 1501
16. Filiaggi M.J., Coombs N.A., and Pilliar R.M. Characterization of the interface in the plasma-sprayed HA Coating/Ti-6Al-4V implant system. J Biomed Mater Res 25 (1991) 1211
17. Ong J.L., Lucas L.C., Lacefield W.R., and Rigney E.D. Structure, solubility and bond strength of thin calcium-phosphate coatings produced by ion-beam sputter deposition. Biomaterials 13 (1992) 249
18. Yoshinari M., Ohtsuka Y., and Derand T. Thin hydroxyapatite coating produced by the ion-beam dynamic mixing method. Biomaterials 15 (1994) 529
19. Yang Y.Z., Kim K.H., Agrawal C.M., and Ong J.L. Effect of post-deposition heating temperature and the presence of water vapor during heat treatment on crystallinity of calcium phosphate coatings. Biomaterials 24 (2003) 5131
20. Yang Y., Kim K.H., Agrawal C.M., and Ong J.L. Influence of post-deposition heating time and the presence of water vapor on sputter-coated calcium phosphate crystallinity. J Dent Res 82 (2003) 833
21. Yang Y., Bumgardner J.D., Cavin R., Carnes D.L., and Ong J.L. Osteoblast precursor cell attachment on heat-treated calcium phosphate coatings. J Dent Res 82 (2003) 449
22. Blalock T., Bai X., and Rabiei A. A study on microstructure and properties of calcium phosphate coatings processed using ion beam assisted deposition on heated substrates. Surf Coat Technol 201 (2007) 5850
23. Rabiei A., Thomas B., Neville B., Lee J.W., and Cuomo J. A novel technique for processing functionally graded HA coatings. Mater Sci Eng C Biol Sci 27 (2007) 523
24. Blalock T.L., Bai X., Narayan R., and Rabiei A. Effect of substrate temperature on mechanical properties of calcium phosphate coatings. J Biomed Mater Res B 85B (2008) 60
25. Rabiei A., Thomas B., Jin C., Narayan R., Cuomo J., Yang Y., et al. A study on functionally graded HA coatings processed using ion beam assisted deposition with in situ heat treatment. Surf Coat Technol 200 (2006) 6111
26. Rabiei A., Blalock T., Thomas B., Cuomo J., Yang Y., and Ong J. Microstructure, mechanical properties, and biological response to functionally graded HA coatings. Mat Sci Eng C Biol Sci 27 (2007) 529
27. Ding S.J., Ju C.P., and Lin J.H.C. Characterization of hydroxyapatite and titanium coatings sputtered on Ti-6Al-4V substrate. J Biomed Mater Res 44 (1999) 266
28. Cui F.Z., Luo Z.S., and Feng Q.L. Highly adhesive hydroxyapatite coatings on titanium alloy formed by ion beam assisted deposition. J Mater Sci Mater Med 8 (1997) 403
29. Choi J.M., Kim H.E., and Lee I.S. Ion-beam-assisted deposition (IBAD) of hydroxyapatite coating layer on Ti-based metal substrate. Biomaterials 21 (2000) 469