Influence of organically modified nanoclay on the performance of pineapple leaf fiber-reinforced polypropylene nanocomposites

Journal of Applied Polymer Science

Volumn 114, Issue 6, 2009, Pages 4091-4103

  Biswal, Manoranjan ^a   Mohanty, Smita ^a   Nayak, Sanjay K ^a  

^a CENTRAL INSTITUTE OF PLASTICS ENGINEERING AND TECHNOLOGY   (India)

Author keywords

DMA; Nanocomposites; PALF; TEM; TGA

Indexed keywords

CLAY GALLERY; CLOISITE; CRYSTALLIZATION BEHAVIOR; D-SPACING; DAMPING FACTORS; DMA; FLEXURAL STRENGTH; IMPACT PROPERTY; IN-FIBER; MATRIX; MECHANICAL PERFORMANCE; MELT BLENDING; NANO CLAYS; NANOMORPHOLOGIES; PALF; PINEAPPLE LEAF FIBER; POLYPROPYLENE NANOCOMPOSITES; REINFORCED NANOCOMPOSITE; STORAGE MODULI; TEM; TGA; THERMAL PROPERTIES; THERMAL STABILITY; TWIN SCREW EXTRUDERS; WIDE ANGLE XRAY DIFFRACTION;

BENDING STRENGTH; BLENDING; CLAY MINERALS; DIFFERENTIAL SCANNING CALORIMETRY; DYNAMIC ANALYSIS; DYNAMIC MECHANICAL ANALYSIS; IMPACT STRENGTH; MECHANICAL PROPERTIES; MORPHOLOGY; NANOSTRUCTURED MATERIALS; PLASTIC PRODUCTS; POLYMER MATRIX COMPOSITES; PUMPING PLANTS; REINFORCED PLASTICS; TENSILE STRENGTH; THERMODYNAMIC PROPERTIES; THERMOGRAVIMETRIC ANALYSIS; TRANSMISSION ELECTRON MICROSCOPY; WATER ABSORPTION;

NANOCOMPOSITES;

BLENDING; CRYSTALLIZATION; EXTRUSION; FABRICATION; FIBER REINFORCED COMPOSITE; MORPHOLOGY; NANOCOMPOSITE; NATURAL FIBER; ORGANOCLAY; PINEAPPLE LEAF FIBER; POLYPROPYLENE; TENSILE PROPERTY; THERMAL STABILITY; THERMOGRAVIMETRY;

EID: 70349854560     PISSN: 00218995     EISSN: 10974628     Source Type: Journal    
DOI: 10.1002/app.31121     Document Type: Article

References (42)

1. Yong, L.; Qinglin, W.; Craig, M.; Clemons, Fei, Y.; Yanjun, X. J Reinf Plast Compos 2007, 22, 3959.
2. Thwe, M. M.; Liao, K. Composite 2002, 33, 43.
3. Plackett, D. Presented at the 7th Toronto Conference on "Progress in Woodfibre-plastic Composites", Toronto, Canada, 2002.
4. Ellison, G. C.; McNaught, R. (2000). Research and development report of ministry of agriculture fisheries and food agri -industrial materials, Reference NF0309, 10 Whitehall Place London SW1A 2HH, February 2000.
5. Felix, J. M.; Gatenholm, P. J Appl Polym Sci 2001, 42, 609.
6. George, J.; Bhagawan, S. S.; Thomas, S. J Appl Polym Sci 1997, 64.
7. Devi, L. U.; Joseph, K.; Manikanada Nair, K. C.; Thomas, S. J Appl Polym Sci 2004, 94, 503.
8. Cantero, G.; Arbelaiz, A.; Mugika, F.; Valea, A.; Mondragon, I. J Reinf Plast Compos 2003, 22, 37.
9. Stamboulis, A.; Ballie, C. A.; Garkhail, S. K.; Van Melick, H. G. H.; Peijs, T. Appl Compos Mater 2000, 7, 273.
10. Rout, J.; Tripathy, S. S.; Mishra, M.; Mohanty, A. K.; Nayak, S. K. Polym Compos 2002, 22, 468.
11. Robson, D.; Hague, J. Presented at the 3rd International Conference on Woodfiber-Plastic Composites, Madison, Wisconsin, 1995.
12. Rowell, R. M.; Han, J. S.; Rowell, J. S. In Natural Polymers and Agrofibres Composites E.L.A.L.A.M. Frolline, L. H. C., Ed. Embrapa Instrumentacao Agropecuaria: Sao Carlos, Brazil, 2000; 115-134.
13. Patel, M.; Bastioili, C.; Marini, L.; Wurdinger, E. Environmental Assessment of Bio-based Polymers and Natural Fibers; Utrecht University: Netherlands, 2002;
14. Mohanty, S.; Verma, S. K.; Tripathy, S. S.; Nayak, S. K. Int Plast Technol 2003, 6, 75.
15. Wong, S.; Shanks, R. A.; Hodzic, H. Macromol Mater Eng 2004, 289, 447.
16. Shah, A. N.; Lakkad, S. C. Fiber Sci Technol 1981, 15, 41.
17. Vaia, R. A.; Ishii, H.; Giannelis, E. P. Chem Mater 1993, 5, 1694.
18. Usuki, A.; Kawasumi, M.; Kojima, Y.; Okada, A.; Kurauchi, T.; Kamigaito, O. J Mater Res 1993, 8, 1174.
19. Usuki, A.; Kojima, Y.; Kawasumi, M.; Okada, A.; Fukushima, Y.; Kurauchi, T.; Kamigaito, O. J Mater Res 1993, 8, 1179.
20. Cho, J. W.; Paul, D. R. Polymer 2001, 42, 1083.
21. Chin, I.; Thurn-Albrecht, T.; Kim, H.; Russell, T. P.; Wang, J. Polymer 2001, 42, 5947.
22. Botev, M.; Betchev, H.; Bikiaris, D.; Panayiotou, C. J Appl Polym Sci 1999, 74, 523.
23. Vaia, R. A.; Price, G.; Ruth, P. N.; Nguyen, H. T.; Lichtenhan, J. Appl Clay Sci 1999, 15, 67.
24. C.C.M. MA. Presented at the First Asian Australasian conference on comporiste materials (ACCM-I), Osaka, Japan, 1998; p 205.
25. Herrera-Franco, P. J.; Valadez-Gonzalez, A. Compos B 2005, 36, 597.
26. Lundin, T.; Cramer, S. M.; Falk, R. H.; Felton, C. J Mater Civil Eng 2004, 16, 547.
27. Ratna, D.; Manoj, N. R.; Varley, R.; Raman, R. K. S.; Simon, G. P. Polym Int 2003, 52, 1403.
28. Bikiaris, D.; Matzinos, P.; Prinos, J.; Flaris, V.; Larena, A.; Panayiotou, C. J Appl Polym Sci 2001, 80, 2877.
29. Foulk, J. A.; Chao, W. Y.; Akin, D. E.; Dodd, R. B.; Layton, P. A. J Polym Environ 2004, 12, 165.
30. Mohanty, S.; Verma, S. K.; Tripathy, S. S.; Nayak, S. K. J Reinf Plast Compos 2004, 23, 625.
31. Rana, A. K.; Mandal, A.; Bandyopadhyay, B. Compos Sci Technol 2003, 31, 143.
32. Lei, Y.; Wu, Q. L.; Clemons, C. M. J Appl Polym Sci 2007, 103, 3056.
33. Ismail, K. In Polypropylene: An A-Z Reference, Karger-Kocsis, J., Ed. Kluwer Academic Publishers: Dordrecht, 1999; 783.
34. Klaus-Peter, M. In Polypropylene: An A-Z Reference, Karger-Kocsis, J., Ed. Kluwer Academic Publishers: Dordrecht, 1999; 527-532.
35. Razdan, S.; Patra, P. K.; Warner, S. Polym Mater Sci Eng 2003, 69, 722.
36. Usuki, A.; Kojima, Y.; Okada, A.; Fukushima, Y.; Kurauchi, T.; Kamigaito, O. J. Mater Res 1993, 8, 1185.
37. Creighton, C. J.; Clyne, T. W. Compos Sci Technol 2000, 60, 525.
38. Yin, S.; Rials, T. G.; Wolcott, M. P. Presented at the Fifth International Conference on Wood Fiber-Plastic Composites, Madison, 1999.;
39. Colom, X.; Carraso, F.; Pages, P.; Canavate, J. Compos Sci Technol 2003, 63, 161.
40. Hashmi, S. A. R.; Kitano, T.; Chand, N. Polym compos 2003, 24, 149.
41. Karger-Kocsis, J. Polypropylene: Structure, Blends and Composites, Vol. 3; Chapman and Hall: London, 1995.
42. Calleja, R. D.; Ribelles, J. L. G.; Padas, M. M.; Greus, A. R.; Colomer, F. R. Polym Compos 1991, 12, 428.