메뉴 건너뛰기




Volumn 5, Issue 2-3, 2009, Pages 135-154

Predictive modelling of average heat partition in high speed machining of AISI/SAE 4140 steel

Author keywords

Finite element analysis; Heat generation; Heat partition models; High speed machining; HSM; TiN coated tools

Indexed keywords

COATINGS; FINITE ELEMENT METHOD; HEAT GENERATION; LOW CARBON STEEL; MACHINING; MOLYBDENUM STEEL; TITANIUM NITRIDE;

EID: 70349753221     PISSN: 17485711     EISSN: 1748572X     Source Type: Journal    
DOI: 10.1504/IJMMM.2009.023388     Document Type: Article
Times cited : (7)

References (27)
  • 2
    • 0002547242 scopus 로고
    • Theoretical study of temperature rise at surfaces of actual contact under oiliness lubricating conditions
    • Institute of Mechanical Engineers London, pp
    • Blok, H. (1938) 'Theoretical study of temperature rise at surfaces of actual contact under oiliness lubricating conditions', Proceedings of General Discussion on Lubrication and Lubricants, Institute of Mechanical Engineers London, pp.222-235.
    • (1938) Proceedings of General Discussion on Lubrication and Lubricants , pp. 222-235
    • Blok, H.1
  • 4
    • 0024737782 scopus 로고
    • Measurement of temperature distribution within tool in metal cutting. Experimental tests and numerical analysis
    • Casto, S.L., Valvo, E.L. and Micari, F. (1989) 'Measurement of temperature distribution within tool in metal cutting. Experimental tests and numerical analysis', Journal of Mechanical Working Technology, Vol. 20, pp.35-46.
    • (1989) Journal of Mechanical Working Technology , vol.20 , pp. 35-46
    • Casto, S.L.1    Valvo, E.L.2    Micari, F.3
  • 5
    • 85135764144 scopus 로고
    • Temperature distribution at the tool-chip interface in metal cutting
    • Chao, B.T. and Trigger, K.J. (1955) 'Temperature distribution at the tool-chip interface in metal cutting', Transactions of the ASME, Vol. 72, pp.1107-1121.
    • (1955) Transactions of the ASME , vol.72 , pp. 1107-1121
    • Chao, B.T.1    Trigger, K.J.2
  • 6
    • 85135756269 scopus 로고
    • Temperature distribution at tool-chip and tool-work interface in metal cutting
    • Chao, B.T. and Trigger, K.J. (1958) 'Temperature distribution at tool-chip and tool-work interface in metal cutting', Transactions of the ASME, Vol. 80, pp.311-320.
    • (1958) Transactions of the ASME , vol.80 , pp. 311-320
    • Chao, B.T.1    Trigger, K.J.2
  • 8
    • 0024127169 scopus 로고
    • Surface metallurgical and tribological characteristics of tin-coated bearing steels
    • Erdemir, A. and Hochman, R.F. (1988) 'Surface metallurgical and tribological characteristics of tin-coated bearing steels', Surface Coatings and Technology, Vol. 36, pp.755-763.
    • (1988) Surface Coatings and Technology , vol.36 , pp. 755-763
    • Erdemir, A.1    Hochman, R.F.2
  • 11
    • 0022093955 scopus 로고
    • Transient temperatures in the vicinity of an asperity contact
    • Gecim, B. and Winer, W.O. (1985) 'Transient temperatures in the vicinity of an asperity contact', Transactions of the ASME Journal of Tribology, Vol. 107, pp.333-342.
    • (1985) Transactions of the ASME Journal of Tribology , vol.107 , pp. 333-342
    • Gecim, B.1    Winer, W.O.2
  • 12
    • 0042890316 scopus 로고    scopus 로고
    • A computational approach to evaluate temperature and heat partition in machining with multilayer coated tools
    • Grzesik, W. and Nieslony, P. (2003) 'A computational approach to evaluate temperature and heat partition in machining with multilayer coated tools', International Journal of Machine Tools and Manufacture Vol. 43, pp.1311-1317.
    • (2003) International Journal of Machine Tools and Manufacture , vol.43 , pp. 1311-1317
    • Grzesik, W.1    Nieslony, P.2
  • 13
    • 2642568508 scopus 로고    scopus 로고
    • Physics based modelling of interface temperatures in machining with multilayer coated tools at moderate cutting speeds
    • Grzesik, W. and Nieslony, P. (2004) 'Physics based modelling of interface temperatures in machining with multilayer coated tools at moderate cutting speeds', International Journal of Machine Tools and Manufacture, Vol. 44, pp.889-901.
    • (2004) International Journal of Machine Tools and Manufacture , vol.44 , pp. 889-901
    • Grzesik, W.1    Nieslony, P.2
  • 14
    • 0001100671 scopus 로고
    • Moving sources of heat and the temperature at sliding contacts
    • Jaeger, J.C. (1942) 'Moving sources of heat and the temperature at sliding contacts', Proceedings Royal Society of NSW, Vol. 76, pp.203-224.
    • (1942) Proceedings Royal Society of NSW , vol.76 , pp. 203-224
    • Jaeger, J.C.1
  • 15
    • 0035217239 scopus 로고    scopus 로고
    • Thermal modelling of the metal cutting process Part II: Temperature rise distribution due to frictional heat source at the tool-chip interface
    • Komanduri, R. and Hou, Z.B. (2001) 'Thermal modelling of the metal cutting process Part II: Temperature rise distribution due to frictional heat source at the tool-chip interface', International Journal of Mechanical Sciences, Vol. 43, pp.57-88.
    • (2001) International Journal of Mechanical Sciences , vol.43 , pp. 57-88
    • Komanduri, R.1    Hou, Z.B.2
  • 16
    • 0027097469 scopus 로고
    • New approaches to characterise cutting tool coatings
    • König, W. (1992) 'New approaches to characterise cutting tool coatings', Annals of the CIRP, Vol. 41, No. 1, pp.49-52.
    • (1992) Annals of the CIRP , vol.41 , Issue.1 , pp. 49-52
    • König, W.1
  • 17
    • 85135261331 scopus 로고
    • On the analysis of cutting tool temperatures
    • Loewen, E.G. and Shaw, M.C. (1954) 'On the analysis of cutting tool temperatures', Transactions of the ASME, Vol. 71, pp.217-231.
    • (1954) Transactions of the ASME , vol.71 , pp. 217-231
    • Loewen, E.G.1    Shaw, M.C.2
  • 19
    • 14344252997 scopus 로고    scopus 로고
    • High speed gear hobbing
    • Rech, J. and Djouadi, M.A. (2001) 'High speed gear hobbing', Wear, Vol. 250, pp.45-53.
    • (2001) Wear , vol.250 , pp. 45-53
    • Rech, J.1    Djouadi, M.A.2
  • 20
    • 0026972515 scopus 로고
    • High-speed machining
    • Schulz, H. and Moriwaki, T. (1992) 'High-speed machining', Annals of the CIRP, Vol. 41, No. 2, pp.637-643.
    • (1992) Annals of the CIRP , vol.41 , Issue.2 , pp. 637-643
    • Schulz, H.1    Moriwaki, T.2
  • 21
    • 0027589740 scopus 로고
    • Experimental and finite element predictions of residual stresses due to orthogonal metal cutting
    • Shih, A.J. and Yang, H.T.Y. (1993) 'Experimental and finite element predictions of residual stresses due to orthogonal metal cutting', International Journal for Numerical Methods in Engineering, Vol. 36, pp.1487-1507.
    • (1993) International Journal for Numerical Methods in Engineering , vol.36 , pp. 1487-1507
    • Shih, A.J.1    Yang, H.T.Y.2
  • 23
    • 0019926678 scopus 로고
    • Improvement in the working accuracy of an nc lathe by compensating for thermal expansion
    • Takeuchi, Y., Sakamoto, M. and Sata, T. (1982) 'Improvement in the working accuracy of an nc lathe by compensating for thermal expansion', Precision Engineering, Vol. 4, No. 1, pp.19-24.
    • (1982) Precision Engineering , vol.4 , Issue.1 , pp. 19-24
    • Takeuchi, Y.1    Sakamoto, M.2    Sata, T.3
  • 24
    • 0024626081 scopus 로고
    • Influence of TiN coating on wear of high speed steel at elevated temperature
    • Wallen, P. and Hogmark, S. (1989) 'Influence of TiN coating on wear of high speed steel at elevated temperature', Wear, Vol. 130, pp.123-135.
    • (1989) Wear , vol.130 , pp. 123-135
    • Wallen, P.1    Hogmark, S.2
  • 25
    • 19944395206 scopus 로고    scopus 로고
    • Progressive tool-wear in machining with coated grooved tools and its correlation with cutting temperature
    • Wanigarathne, P.C., Kardekar, A.S., Dillon, O.W., Poulachon, G. and Jawahir, I.S. (2005) 'Progressive tool-wear in machining with coated grooved tools and its correlation with cutting temperature', Wear, Vol. 259, pp.1215-1224.
    • (2005) Wear , vol.259 , pp. 1215-1224
    • Wanigarathne, P.C.1    Kardekar, A.S.2    Dillon, O.W.3    Poulachon, G.4    Jawahir, I.S.5
  • 27
    • 6344264017 scopus 로고    scopus 로고
    • Computer simulation of orthogonal cutting using a tool with multiple coatings
    • Yen, Y-C., Jain, A., Chigurupati, P., Wu, W-T. and Altan, T. (2004) 'Computer simulation of orthogonal cutting using a tool with multiple coatings', Machining Science and Technology, Vol. 8, No. 2, pp.305-326.
    • (2004) Machining Science and Technology , vol.8 , Issue.2 , pp. 305-326
    • Yen, Y.-C.1    Jain, A.2    Chigurupati, P.3    Wu, W.-T.4    Altan, T.5


* 이 정보는 Elsevier사의 SCOPUS DB에서 KISTI가 분석하여 추출한 것입니다.