Doubly fed induction generator model-based sensor fault detection and control loop reconfiguration

IEEE Transactions on Industrial Electronics

Volumn 56, Issue 10, 2009, Pages 4229-4238

  Rothenhagen, Kai ^a   Fuchs, Friedrich Wilhelm ^a  

^a UNIVERSITY OF KIEL   (Germany)

Author keywords

Doubly fed induction machine; Fault tolerant control; Observers; Sensors

Indexed keywords

CLOSED LOOPS; CLOSED-LOOP CONTROL; CONTROL LOOP; DISTRIBUTED ENERGY SYSTEMS; DOUBLY FED INDUCTION GENERATORS; DOUBLY FED INDUCTION MACHINE; FAULT-TOLERANT CONTROL; FAULTY SENSOR; MACHINE OPERATION; MEASUREMENT RESULTS; OBSERVERS; OPEN LOOP OPERATION; OPEN LOOPS; PARITY EQUATION; POSITION SENSORS; RELIABILITY AND AVAILABILITY; SENSOR FAULT DETECTION; SHORT PERIODS; STABILITY ANALYSIS;

ASYNCHRONOUS GENERATORS; CLOSED LOOP CONTROL SYSTEMS; ELECTRIC GENERATORS; FAULT DETECTION; QUALITY ASSURANCE; SENSORS; SIGNAL DETECTION; WIND POWER;

FAULT TOLERANCE;

EID: 70349620384     PISSN: 02780046     EISSN: None     Source Type: Journal    
DOI: 10.1109/TIE.2009.2013683     Document Type: Article

References (43)

1. A. D. Hansen, F. Iov, F. Blaabjerg, and L. H. Hansen, "Review of contemporary wind turbine concepts and their market penetration," J. Wind Eng., vol. 28, no. 3, pp. 247-263, May 2004.
2. R. Patton, P. Frank, and R. Clark, Issues of Fault Diagnosis for Dynamic Systems. Berlin, Germany: Springer-Verlag, 2000.
3. R. Isermann, "Supervision, fault-detection and fault diagnosis methods - An introduction," Control Eng. Pract., vol. 5, no. 5, pp. 639-652, May 1997.
4. R. Isermann and P. Balle, "Trends in the application of model-based fault detection and diagnosis of technical processes," Control Eng. Pract., vol. 5, no. 5, pp. 709-719, May 1997.
5. D. Casadei, F. Filippetti, A. Stefani, C. Rossi, A. Yazidi, and G. Capolino, "Experimental fault characterization of doubly fed induction machines for wind power generation," in Proc. SPEEDAM, 2006, pp. 1281-1286.
6. S. Bachir, S. Tnani, J. Trigeassou, and G. Champenois, "Diagnosis by parameter estimation of stator and rotor faults occurring in induction machines," IEEE Trans. Ind. Electron., vol. 53, no. 3, pp. 963-973, Jun. 2007.
7. A. Kia, H. Henao, and G. Capolino, "A high-resolution frequency estimation method for three-phase induction machine fault detection," IEEE Trans. Ind. Electron., vol. 54, no. 4, pp. 2305-2314, Aug. 2007.
8. F. Filippetti, G. Franceschini, C. Tassoni, and P. Vas, "Recent developments of induction motor drives fault diagnosis using AI techniques," IEEE Trans. Ind. Electron., vol. 47, no. 5, pp. 994-1004, Oct. 2000.
9. O. Wallmark, L. Harnefors, and O. Carlson, "Control algorithms for a fault-tolerant PMSM drive," IEEE Trans. Ind. Electron., vol. 54, no. 4, pp. 1973-1980, Aug. 2007.
10. S. Bolognani, M. Zordan, and M. Zigliotto, "Experimental fault-tolerant control of a PMSM drive," IEEE Trans. Ind. Electron., vol. 47, no. 5, pp. 1134-1141, Oct. 2000.
11. P. Rodriguez, A. Timbus, R. Teodorescu, M. Liserre, and F. Blaabjerg, "Flexible active power control of distributed power generation systems during grid faults," IEEE Trans. Ind. Electron., vol. 54, no. 5, pp. 2583-2592, Oct. 2007.
12. S. Bennett, "Model based methods for sensor fault-tolerant control of rail vehicle traction," Ph.D. dissertation, Univ. Hull, Hull, U.K., 1998.
13. S. Bennett, R. Patton, S. Daley, and D. Newton, "Model based intermittent fault tolerance in an induction motor drive," in Proc. Symp. Control, Optimization Supervision, Lille, France, 1996, vol. 1, pp. 678-683.
14. C. Thybo, "Fault-tolerant control of inverter fed induction motor drives," Ph.D. dissertation, Univ. Aalborg, Aalborg, Denmark, 1999.
15. L. Baghli, P. Poure, and A. Rezzoug, "Sensor fault detection for fault tolerant vector controlled induction machine," in Proc. EPE, 2005, pp. 1-10.
16. Y. Jeong, S. Sul, S. Schulz, and N. Patel, "Fault detection and fault-tolerant control of interior permanent-magnet motor drive system for electric vehicle," IEEE Trans. Ind. Appl., vol. 41, no. 1, pp. 46-51, Jan./Feb. 2005.
17. M. Benbouzid, D. Diallo, and A. Makouf, "A fault-tolerant control management system for electric-vehicle or hybrid-electric-vehicle induction motor drives," Electromotion, vol. 10, no. 1, pp. 45-55, 2003.
18. F. Zidani, M. Benbouzid, D. Diallo, and A. Benchaib, "Active faulttolerant control of induction motor drives in EV and HEV against sensor failures using a fuzzy decision system," in Proc. Int. Elect. Mach. Drives Conf., 2003, vol. 2, pp. 677-683.
19. K. Rothenhagen and F. W. Fuchs, "Current sensor fault detection by bilinear observer for a doubly fed induction generator," in Proc. IEEE IECON, Paris, France, 2006, pp. 1369-1374.
20. K. Rothenhagen, S. Thomsen, and F. W. Fuchs, "Voltage sensor fault detection and reconfiguration for a doubly fed induction generator," in Proc. SDEMPED, Krakow, Poland, 2007, pp. 377-382.
21. K. Rothenhagen and F. W. Fuchs, "Current sensor fault detection and reconfiguration for a doubly fed induction machine," in Proc. IEEE PESC, Orlando, FL, 2007, pp. 2732-2738.
22. K. Rothenhagen and F.W. Fuchs, "Current sensor fault detection, isolation and control reconfiguration for doubly fed induction generators," in Proc. IEEE IECON, Taipei, Taiwan, 2007, pp. 1115-1120.
23. A. Petersson, L. Hernefors, and T. Thiringer, "Evaluation of current control methods for wind turbines using doubly-fed induction machines," IEEE Trans. Power Electron., vol. 20, no. 1, pp. 227-235, Jan. 2005.
24. A. Timbus, R. Teodorescu, F. Blaabjerg, and M. Liserre, "Synchronization methods for three phase distributed power generation systems. An overview and evaluation," in Proc. IEEE PESC, Orlando, FL, 2007, pp. 2474-2481. CD-ROM.
25. H. Kubota and K. Matsuse, "Speed sensorless field oriented control of induction machines using flux observer," in Proc. IEEE IECON, 1994, vol. 3, pp. 1611-1615.
26. H. Kubota and K. Matsuse, "The improvement of performance at low speed by offset compensation of stator voltage sensorless vector controlled induction machines," in Conf. Rec. IEEE IAS Annu. Meeting, San Diego, CA, 1996, vol. 1, pp. 257-261.
27. M. Abrate, G. Griva, F. Profumo, and A. Tenconi, "High speed sensorless fuzzy-like Luenberger observer," in Proc. IEEE PESC, 1999, vol. 1, pp. 477-481.
28. R. Datta and V. T. Ranganathan, "A simple position sensorless algorithm for rotor side field oriented control of wound rotor induction machine," IEEE Trans. Ind. Electron., vol. 48, no. 4, Aug. 2001. pp. 786-368.
29. D. G. Luenberger, "Observing the state of a linear system," IEEE Trans. Military Electron., vol. ME-8, no. 2, pp. 74-80, Apr. 1964.
30. J. Lunze, Regelungstechnik 2. New York: Springer-Verlag, 2005.
31. M. Abdellatif, M. Pietrzak-David, and I. Slama-Belkhodja, "Sensitivity of the currents input-output decoupling vector control of the DFIM versus current sensors fault," in Proc. EPE-PEMC, Poznan, Poland, 2008, pp. 953-959.
32. H. Kubota, K. Matsuse, and T. Nakano, "New adaptive flux observer of induction motor for wide speed range motor drives," in Proc. IEEE IECON, 1990, pp. 921-926.
33. K. Rothenhagen and F. W. Fuchs, "Implementation of state and input observers for doubly-fed induction generators," in Proc. EUROCON, Warsaw, Poland, 2007, pp. 2110-2117.
34. S. Thomsen, K. Rothenhagen, and F.W. Fuchs, "Analysis of stator voltage observers for a doubly fed induction generator," in Proc. EPE, Aalborg, Denmark, 2007, pp. 1-9.
35. S. Krzemiński and T. Kaczorek, Perfect Reduced-Order Unknown-Input Observer for Standard Systems, vol. 52. Warsaw, Poland: Polish Acad. Sci., 2004.
36. S. Hui and S. ? Zak, "Observer design for systems with unknown inputs," Int. J. Appl. Math. Comput. Sci., vol. 15, no. 4, pp. 431-446, 2005.
37. J. Chen, R. Patton, and H. Zhang, "Design of unknown input observers and robust fault detection filter," Int. J. Control, vol. 63, no. 1, pp. 85-105, Jan. 1996.
38. D. Arsudis and W. Vollstedt, "Sensor-less power control of a DFM AC machine with nearly sinusoidal line current," in Proc. EPE, Aachen, Germany, 1989.
39. M. Benbouzid, D. Diallo, and M. Zeraouila, "Advanced fault-tolerant control of induction-motor drives for EV/HEV traction applications: From conventional to modern and intelligent control techniques," IEEE Trans. Veh. Technol., vol. 56, no. 2, pp. 519-528, Mar. 2007.
40. M. Hou and P. Müller, "Design of observers for linear systems with unknown inputs," IEEE Trans. Autom. Control, vol. 37, no. 6, pp. 871-875, Jun. 1992.
41. P. Jansen and R. Lorenz, "A physically insightful approach to the design and accuracy assessment of flux observers for field oriented induction machine drives," IEEE Trans. Ind. Appl., vol. 30, no. 1, pp. 101-110, Jan./Feb. 1994.
42. P. Jansen, R. Lorenz, and D. Novotny, "Observer-based direct field orientation: Analysis and comparison of alternative methods," IEEE Trans. Ind. Appl., vol. 30, no. 4, pp. 945-953, Jul./Aug. 1994.
43. J. Niiranen, "Simulation of doubly fed induction generator wind turbine with an active crowbar," in Proc. Eur. Wind Energy Conf., 2004.