Viscosity and density measurements of diisopropyl ether and dibutyl ether at different temperatures and pressures

Journal of Chemical and Engineering Data

Volumn 54, Issue 9, 2009, Pages 2353-2358

  Meng, Xianyang ^a   Wu, Jiangtao ^a   Liu, Zhigang ^a  

^a XI'AN JIAOTONG UNIVERSITY   (China)

Author keywords

[No Author keywords available]

Indexed keywords

AVERAGE ABSOLUTE DEVIATION; DENSITY MEASUREMENTS; DIBUTYL ETHER; DIISOPROPYL ETHER; HARD-SPHERE; MAXIMUM PRESSURE; TAIT-TYPE EQUATIONS; TEMPERATURE RANGE; VIBRATING-WIRE INSTRUMENT;

ATMOSPHERIC PRESSURE; ETHERS; VISCOSITY;

ORGANIC COMPOUNDS;

EID: 70349518670     PISSN: 00219568     EISSN: None     Source Type: Journal    
DOI: 10.1021/je8005369     Document Type: Article

References (43)

1. Marsh, K. N.; Niamskul, P.; Gmehling, J.; Bolts, R. Review of thermophysical property measurements on mixtures containing MTBE, TAME, and other ethers with non-polar solvents. Fluid Phase Equilib. 1999, 156, 207-227.
2. Wang, Y. G.; Wu, J. T.; Liu, Z. G. The Thermal Conductivity of Gaseous Dimethyl Ether from (263 to 383) K. J. Chem. Eng. Data 2006, 51, 164-168.
3. Wang, F. K.; Wu, J. T.; Liu, Z. G. Surface tensions of mixtures of diesel oil or gasoline and dimethoxymethane, dimethyl carbonate or ethanol. Energy Fuels 2006, 20, 2471-2474.
4. Zhao, X. M.; Ren, M. F.; Liu, Z. G. Critical solubility of dimethyl ether (DME) plus diesel fuel and dimethyl carbonate (DMC) plus diesel fuel. Fuel 2005, 84, 2380-2383.
5. Wu, J. T.; Liu, Z. G.; Pan, J.; Zhao, X. M. Vapor Pressure Measurements of Dimethyl Ether from (233 to 399) K. J. Chem. Eng. Data 2004, 49, 32-34.
6. Wu, J. T.; Liu, Z. G.; Bi, S. S.; Meng, X. Y. Viscosity of saturated liquid dimethyl ether from (227 to 343) K. J. Chem. Eng. Data 2003, 48, 426-429.
7. Meng, X. Y.; Zheng, P. J.; Wu, J. T.; Liu, Z. G. Density and Viscosity Measurements of Diethyl Adipate from (303 to 373) K and up to 20 MPa. J. Chem. Eng. Data 2008, 53, 1474-1478.
8. Audonnet, F.; Padua, A. A. H. Simultaneous measurement of density and viscosity of n-pentane from 298 to 383 K and up to 100 MPa using a vibrating-wire instrument. Fluid Phase Equilib. 2001, 181, 147-161.
9. Assael, M. J.; Dymond, J. H.; Papadaki, M.; Patterson, P. M. Correlation and prediction of dense fluid transport coefficients. I. n-alkanes. Int. J. Thermophys. 1992, 13, 269-281.
10. Dymond, J. H.; Assael, M. J. Modified Hard-Spheres Scheme. In Transport Properties of Fluids: Their Correlation, Prediction and Estimation; Millat, J.; Dymond, J. H.; Nieto de Castro, C. A., Eds.; Cambridge University Press: Cambridge, U.K., 1996; pp 226-249.
11. Ulbig, P.; Bubolz, M.; Kornek, C.; Schulz, S. Excess Volumes of Binary Mixtures Containing Diisopropyl Ether + 1-Butanol or Diisopropy Ether + Diethyl Ketone and Ethanol + Heptane at High Pressures. J. Chem. Eng. Data 1997, 42, 1290-11290
12. Ihmels, E. C.; Gmehling, J. Compressed Liquid Densities of Methyl tert-Butyl Ether (MTBE), Ethyl tert-Butyl Ether (ETBE), and Diisopropyl Ether (DIPE). J. Chem. Eng. Data 2002, 47, 1307-1313.
13. Hwang, I. C.; Jo, M. Y.; Kwak, H. Y.; Park, S. J.; Han, K. J. Isothermal VLE and VE at 303.15 K for the Binary and Ternary Mixtures of Di-isopropyl Ether (DIPE) + 1-Propanol + 2, 2, 4-Trimethylpentane. J. Chem. Eng. Data 2007, 52, 2503-2508.
14. Reddy, K. V. N. S.; Reddy, G. S.; Krishnaiah, A. Excess volumes, densities, speeds of sound and viscosities for the binary systems of diisopropyl ether with hydrocarbons at 303.15 K. Thermochim. Acta 2006, 440, 43-50.
15. Chen, H. W.; Tu, C. H. Densities, Viscosities, and Refractive Indices for Binary and Ternary Mixtures of Diisopropyl Ether, Ethanol, and 2, 2, 4-Trimethylpentane. J. Chem. Eng. Data 2006, 51, 261-267.
16. Atik, Z.; Lourddani, K. Densities and Volumetric Properties of Binary and Ternary Mixtures of Diisopropyl Ether, Fluorobenzene, α, α, α-trifluorotoluene, and Ethanol at Temperature 298.15 K and Pressure 101 kPa. J. Solution Chem. 2006, 35, 1453-1466. (Pubitemid 44627708)
17. Ye, J. D.; Tu, C. H. Densities, Viscosities, and Refractive Indices for Binary and Ternary Mixtures of Diisopropyl Ether, Ethanol, and Methylcyclohexane. J. Chem. Eng. Data 2005, 50, 1060-1067.
18. Venkatesu, P.; Lee, M. J.; Lin, H. M. Volumetric properties of (N, Ndimethylformamide + aliphatic diethers) at temperatures ranging from (298.15 to 358.15) K. J. Chem. Thermodyn. 2005, 37, 996-1002.
19. Ouyang, G.; Guizeng, L.; Pan, C.; Yang, Y.; Huang, Z.; Kang, B. Excess Molar Volumes and Surface Tensions of Xylene with Isopropyl Ether or Methyl tert-Butyl Ether at 298.15 K. J. Chem. Eng. Data 2004, 49, 732-734.
20. Peralta, R. D.; Infante, R.; Cortez, G.; Elizalde, L. E.; Wisniak, J. Excess Molar and Partial Volumes of 2, 2′-Oxybis[Propane] + Ethyl Acrylate, Butyl Acrylate, Methyl Methacrylate, and Styrene at 298.15 K. Phys. Chem. Liquids 2003, 41, 371-381. (Pubitemid 37036196)
21. George, J.; Sastry, N. V. Thermophysical Properties of Binary Mixtures of Methyl Methacrylate + Di-Ethers (Ethyl, Isopropyl, and Butyl) at 298.15 and 308.15 K. Int. J. Thermophys. 2003, 24, 1697-1719.
22. Peng, I. H.; Tu, C. H. Densities and Viscosities of Acetone, Diisopropyl Ether, Ethanol, and Methyl Ethyl Ketone with a Five-Component Hydrocarbon Mixture from 288.15 to 308.15 K. J. Chem. Eng. Data 2002, 47, 1457-1461.
23. Domanska, U.; Lachwa, J.; Letcher, T. M. Excess molar volumes, and excess molar enthalpies of (N-methyl-2-pyrrolidinone + an ether) at the temperature 298.15 K. J. Chem. Thermodyn. 2002, 34, 885-893.
24. Pineiro, A.; Olvera, A.; Garcia-Miaja, G.; Costas, M. Excess Molar Enthalpies of Tetrahydrofuran or Diisopropyl Ether + 1-Alkanols at 298.15 K, Using a Newly Designed Flow Mixing Cell for an Isothermal Microcalorimeter. J. Chem. Eng. Data 2001, 46, 1274-1279.
25. Rezanova, E. N.; Kammerer, K.; Lichtenthaler, R. N. Excess Enthalpies and Volumes of Ternary Mixtures Containing 1-Propanol or 1-Butanol, an Ether (Diisopropyl Ether or Dibutyl Ether), and Heptane. J. Chem. Eng. Data 2000, 45, 124-130.
26. Arce, A., Jr.; Martinez-Ageitos, J.; Rodil, E.; Rodriuez, O.; Soto, A. Physical and equilibrium properties of diisopropyl ether + isopropyl alcohol + water system. Fluid Phase Equilib. 2000, 170, 113-126.
27. Obama, M.; Oodera, Y.; Kohama, N.; Yanase, T.; Saito, Y.; Kusano, K. Densities, molar volumes, and cubic expansion coefficients of 78 aliphatic ethers. J. Chem. Eng. Data 1985, 30, 1-5.
28. Arce, A.; Rodil, E.; Soto, A. Molar Volume, Molar Refraction, and Isentropic Compressibility Changes of Mixing at 25°C for the System Ethanol + Methanol + Dibutyl Ether. J. Solution Chem. 1998, 27, 911-923.
29. Benito, G. G.; Carton, A.; Uruena, M. A. Vapor-Liquid Equilibria for the Mixtures Dibutyl Ether + 2-Butanol and + Propyl Acetate at 101.3 kPa. J. Chem. Eng. Data 1994, 39, 249-250.
30. Bernazzani, L.; Mollica, V.; Tine, M. R. Partial molar volumes of organic compounds in C8 solvents at 298.15 K. Fluid Phase Equilib. 2002, 203, 15-29.
31. George, J.; Sastry, N. V. Measurements of densities, viscosities, speeds of sound and relative permittivities and excess molar volumes, excess isentropic compressibilities and deviations in relative permittivities and molar polarizations for dibutyl ether+benzene, +toluene and+p-xylene at different temperatures. J. Chem. Thermodyn. 2003, 35, 1837-1853.
32. Han, K. J.; Hwang, I. C.; Park, S. J.; Park, I. H. Isothermal Vapor-Liquid Equilibrium at 333.15 K, Density, and Refractive Index at 298.15 K for the Ternary Mixture of Dibutyl Ether + Ethanol + Benzene and Binary Subsystems. J. Chem. Eng. Data 2007, 52, 1018-1024.
33. Jimenez, E.; Segade, L.; Franjo, C.; Casas, H.; Legido, J. L.; Paz Andrade, M. I. Viscosity deviations of ternary mixtures di-n-butyl ether+1-propanol+n-octane at several temperatures. Fluid Phase Equilib. 1998, 149, 339-358.
34. Kirss, H.; Kuus, M.; Siimer, E. Isobaric Vapor-Liquid Equilibria of the Ternary System Dibutyl Ether + 1-Pentanol + Nonane. J. Chem. Eng. Data 2006, 51, 1887-1891. (Pubitemid 44562557)
35. Lee, M. J.; Wei, M. C. Densities and viscosities of 2-butanone/dibutyl ether, 2-picoline/2-butanone, and 2-picoline/water mixtures. J. Chem. Eng. Data 1992, 37, 209-212.
36. Letcher, T. M.; Goldon, A. The excess molar volumes of (n-butylamin + an ether) at the temperature 298.15 K and the application of the ERAS model. Fluid Phase Equilib. 1996, 114, 147-159.
37. Mozo, I.; de la Fuente, I. G.; Gonzalez, J. A.; Cobos, J. C. Densities, Excess Molar Volumes, Speeds of Sound at (293.15, 298.15, and 303.15) K and Isentropic Compressibilities at 298.15 K for 1-Butanol, 1-Pentanol, or 1-Hexanol + Dibutylether Systems. J. Chem. Eng. Data 2008, 53, 857-862.
38. Paul, H. I.; Krug, J.; Gutsche, B.; Knapp, H. Measurements of vaporliquid equilibria hE and VE for binary mixtures of dibutyl ether with 1-chloropentane, 1, 2-dichloroethene and 1, 1, 1-trichloroethane. J. Chem. Eng. Data 1986, 31, 448-456.
39. Rilo, E.; Freire, S.; Segade, L.; Cabeza, O.; Franjo, C.; Jimenez, E. Surface tensions, densities and refractive indexes of mixtures of dibutyl ether and 1-alkanol at T)298.15 K. J. Chem. Thermodyn. 2003, 35, 839-850.
40. Serna, A.; de la Fuente, I. G.; Gonzalez, J. A.; Cobos, J. C.; Casanova, C. Excess molar volumes of 1-alcohol + aliphatic monoethers at 298.15 K. Fluid Phase Equilib. 1995, 110, 361-367.
41. Tanaka, R.; Toyama, S. Excess Molar Volumes and Excess Molar Heat Capacities for Binary Mixtures of Ethanol with Chlorocyclohexane, 1-Nitropropane, Dibutyl Ether, and Ethyl Acetate at the Temperature of 298.15 K. J. Chem. Eng. Data 1996, 41, 1455-1458.
42. Tovar, C. A.; Carballo, E.; Cerdeirina, C. A.; Romani, L. Excess Molar Volumes and Excess Molar Heat Capacities of Mixtures Containing (Mono and Poly)ethers + Ethyl Acetate. J. Chem. Eng. Data 1997, 42, 1085-1089.
43. Villa, S.; Riesco, N.; Carmona, F. J.; de la Fuente, I. G.; Gonzalez, J. A.; Cobos, J.C.Temperaturedependenceofexcesspropertiesinalcohols+ethers mixtures.: I. Excess molar volumes of 1-propanol or 1-hexanol+ethers at 318.15 K. Thermochim. Acta 2000, 362, 169-177.