A new technique of cogging torque suppression in direct-drive permanent magnet brushless machines

2009 IEEE International Electric Machines and Drives Conference, IEMDC '09

Volumn , Issue , 2009, Pages 9-16

  Fei, W ^a   Luk, P C K ^a  

^a CRANFIELD UNIVERSITY   (United Kingdom)

Author keywords

[No Author keywords available]

Indexed keywords

ADVERSE EFFECT; ANALYTICAL FORMULAS; ANALYTICAL MODEL; BACK-EMF; BRUSHLESS MACHINES; COGGING TORQUE; DIRECT DRIVE; ELECTRIC PROPULSION SYSTEMS; FEA MODELS; MAGNET POLES; NO REDUCTION; ON-MACHINES; PAIRING METHOD; PERMANENT-MAGNET MACHINE; PROTOTYPE MACHINE; STATOR POLES; SUPPRESSION METHOD; THREE DIMENSIONAL FINITE ELEMENT ANALYSIS;

ELECTRIC DRIVES; ELECTRIC GENERATORS; ELECTRIC MACHINERY; ELECTRIC PROPULSION; MAGNETIC DEVICES; PERMANENT MAGNETS; POLES;

TORQUE;

EID: 70349443047     PISSN: None     EISSN: None     Source Type: Conference Proceeding    
DOI: 10.1109/IEMDC.2009.5075176     Document Type: Conference Paper

References (21)

1. Z. Q. Zhu and D. Howe, "Analytical prediction of the cogging torque in radial-field permanent magnet brushless motors,' IEEE Trans. Magn., vol. 28, no. 2, pp. 1371-1374, Mar. 1992.
2. D. C. Hanselman, "Effect of skew, pole count and slot count on brushless motor radial force, cogging torque and back EMF," IEE Proc. B-Electr. Power Appl., vol. 144, no. 5, pp. 325-330, 1997.
3. J. F. Gieras, "Analytical approach to cogging torque calculation of PM brushless motors," IEEE Trans. Ind. Applicat., vol. 40, no. 5, pp. 1310- 1316, Sept./Oct. 2002.
4. G. Sooriyakumar, R. Perryman, and S. J. Dodds, "Improved cogging torque calculation methods for surface mounted permanent magnet synchronous motors," in Proc. Int. Uni. Power Engineering Conf. (UPEC'06), vol. 2, pp. 753-757, Sept. 2006.
5. J. Steinbrink, "Analytical determination of the cogging torque in brushless motors excited by permanent magnets," in proc. IEEE int. Eletric Machines & Drives conf. (IEMDC'07), vol. 1, pp. 172-177, May 2007.
6. D. Zarko, D. Ban, and T. A. Lipo, "Analytical solution for cogging torque in surface permanent-magnet motors using conformal mapping," IEEE Trans. Magn., vol. 44, no. 1, pp. 52-65, Jan. 2008.
7. N. Bianchi and S. Bolognani, "Design techniques for reducing the cogging torque in surface-mounted PM motors," IEEE Trans. Ind. Applicat., vol. 38, no. 5, pp. 1259-1265, Sept./Oct. 2002.
8. Z. Q. Zhu, S. Ruangsinchaiwanich, D. Ishak, and D. Howe, "Analysis of cogging torque in brushless machines having nonuniformly distributed stator slots and stepped rotor magnets," IEEE Trans. Magn., vol. 41, no. 10, pp.3910-3912, Oct. 2008.
9. T. Li and G. Slemon, "Reduction of cogging torque in permanent magnet motors," IEEE Trans. Magn., vol. 24, no. 6, pp. 2901-2903, Nov. 2008.
10. B. Ackermann, J. H. H. Janssen, R. Sotteck, and R. I. van Steen, "New technique for reducing cogging torque in a class of brushless DC motors," IEE Proc. B-Electr. Power Appl., vol. 139, no. 4, pp. 315-320, July 1992.
11. Z. Q. Zhu and D. Howe, "Influence of design parameters on cogging torque in permanent magnet machines," IEEE Trans. Energy Conversion, vol. 15, pp. 407-412, Dec. 2000.
12. Y. Yang, X. Wang, R. Zhang, T. Ding, and R. Tang, "The Optimization of pole arc coefficient to reduce cogging torque in surface-mounted permanent magent motors," IEEE Trans. Magn., vol. 42, no. 4, pp.1135- 1138, April 2008.
13. S. M. Hwang, J. B. Eom, G. B. Hwang, W. B. Jeong, and Y. H. Jung, "Cogging torque and acoustic noise reduction in permanent magnet motors by teeth pairing," IEEE Trans. Magn., vol. 36, no. 5, pp.3144- 3146, Sept. 2000.
14. Y. Yang, X. Wang, R. Zhang, C. Zhu, and T. Ding, "Research of cogging torque reduction by different slot width pairing permanent magnet motors," in proc. 8th int. Eletrical Machines and systems conf. (ICEMS'05), vol. 1, pp. 367-370, Sept. 2005.
15. C. S. Koh and J.-S. Seol, "New cogging torque reduction method for brushless permanent-magnet mtors," IEEE Trans. Magn., vol. 39, no. 6, pp.3503-3506, Nov. 2003.
16. Y. Yang, X. Wang, X. Leng, D. Wang, and S. Liu, "Reducing cogging torque in surface-mounted permanent magnet motors by teeth notching," in proc. 2nd IEEE Industrial Electronics and Applications Conf. (ICIEA'07), pp. 265-268, May 2007.
17. R. Lateb, N. Takorabet, and F. Meibody-Tabar, "Effect of magnet segmentation on the cogging torque in surface-mounted permanentmagnet motors," IEEE Trans. Magn., vol. 42, no. 3, pp.442-445, Mar. 2006.
18. L. Dosiek and P. Pillay, "Cogging torque reduction in permanent magnet machines," IEEE Trans. Ind. Applicat., vol. 43, no. 6, pp. 1565-1571, Nov./Dec. 2007.
19. Z. Q. Zhu, D. Howe, and C. C. Chan, "Improved analytical model for predicting the magnetic field distribution in brushless permanent-magnet machines," IEEE Trans. Magn., vol. 38, no. 1, pp.229-238, Jan. 2002.
20. D. Howe and Z. Q. Zhu, "The influence of finite element discretisation on the prediction of cogging torque in permanent magnet excited motors," IEEE Trans. Magn., vol. 28, no. 2, pp.1080-1083, Mar.1992.
21. I. Nishiguchi, A. Kameari, and K. Haseyama, "On the local force computation of deformable bodies in magnetic field," IEEE Trans. Magn., vol. 35, no. 3, pp.1650-1653, May 1999.