Effects of monomer ratios and highly radiopaque fillers on degree of conversion and shrinkage-strain of dental resin composites

Dental Materials

Volumn 25, Issue 11, 2009, Pages 1411-1418

  Amirouche Korichi, Amel ^a,b   Mouzali, Mohamed ^b   Watts, David C ^c  

^a CENTRE DE RECHERCHE SCIENTIFIQUE ET TECHNIQUE EN ANALYSES PHYSICO CHIMIQUES CRAPC   (Algeria)

^b UNIVERSITY OF SCIENCES AND TECHNOLOGY HOUARI BOUMEDIENE   (Algeria)

^c UNIVERSITY OF MANCHESTER   (United Kingdom)

Author keywords

BisGMA; Degree of conversion; Opaque mineral fillers; Polymerization Shrinkage strain; Restorative composites; TEGDMA; Viscosity

Indexed keywords

BISGMA; DEGREE OF CONVERSION; OPAQUE MINERAL FILLERS; POLYMERIZATION SHRINKAGE-STRAIN; RESTORATIVE COMPOSITES; TEGDMA;

FILLERS; MINERALS; MONOMERS; POLYMERIZATION; POLYMERS; RESINS; SHRINKAGE; SILICATE MINERALS; VISCOSITY;

DENTAL COMPOSITES;

2-(DIMETHYLAMINO)ETHYL METHACRYLATE; BARIUM DERIVATIVE; BARIUM OXIDE; BARIUM SULFATE; BIOMEDICAL AND DENTAL MATERIALS; BISPHENOL A BIS(2 HYDROXYPROPYL) ETHER DIMETHACRYLATE; CAMPHOROQUINONE; CONTRAST MEDIUM; LANTHANUM; LANTHANUM OXIDE; MACROGOL DERIVATIVE; METHACRYLIC ACID DERIVATIVE; METHACRYLIC ACID DIMETHYLAMINOETHYL ESTER; MINERAL; OXIDE; POLYMER; POLYMETHACRYLIC ACID DERIVATIVE; REDUCING AGENT; RESIN; STRONTIUM; TERPENE; TRIETHYLENE GLYCOL DIMETHACRYLATE; ZIRCONIUM; ZIRCONIUM OXIDE;

ARTICLE; CHEMISTRY; HUMAN; INFRARED SPECTROSCOPY; MATERIALS TESTING; MECHANICAL STRESS; PHYSICAL CHEMISTRY; SPECTROSCOPY; SURFACE PROPERTY; TEMPERATURE; TIME; VISCOSITY;

BARIUM COMPOUNDS; BARIUM SULFATE; BISPHENOL A-GLYCIDYL METHACRYLATE; COMPOSITE RESINS; CONTRAST MEDIA; DENTAL MATERIALS; HUMANS; LANTHANUM; MATERIALS TESTING; METHACRYLATES; MINERALS; OXIDES; PHYSICOCHEMICAL PROCESSES; POLYETHYLENE GLYCOLS; POLYMERS; POLYMETHACRYLIC ACIDS; REDUCING AGENTS; SPECTROSCOPY, FOURIER TRANSFORM INFRARED; SPECTRUM ANALYSIS; STRESS, MECHANICAL; STRONTIUM; SURFACE PROPERTIES; TEMPERATURE; TERPENES; TIME FACTORS; VISCOSITY; ZIRCONIUM;

EID: 70349425676     PISSN: 01095641     EISSN: None     Source Type: Journal    
DOI: 10.1016/j.dental.2009.06.009     Document Type: Article

References (31)

1. Asmussen E., and Peutzfeldt A. Influence of UEDMA BisGMA and TEGDMA on selected mechanical properties of experimental resin composites. Dent Mater 14 (1998) 51-56
2. Ahn K.D., Chung C.M., and Kim Y.H. Synthesis and photopolymerization of multifunctional methacrylates derived from Bis-GMA for dental applications. J Appl Polym Sci 71 (1999) 2033-2037
3. Sideridou I., Tserki V., and Papanastasiou G. Study of water sorption, solubility and modulus of elasticity of light-cured dimethacrylate-based dental resins. Biomaterials 24 (2003) 655-665
4. Sideridou I., Tserki V., and Papanastasiou G. Effect of chemical structure on degree of conversion in light-cured dimethacrylate-based dental resins. Biomaterials 23 (2002) 1819-1829
5. Lovell L.G., Stansbury J.W., Syrpes D.C., and Bowman C.N. Effects of composition and reactivity on the reaction kinetics of dimethacrylate/dimethacrylate copolymerizations. Macromolecules 32 (1999) 3913-3921
6. Atai M., and Watts D.C. A new kinetic model for the photopolymerization shrinkage-strain of dental composites and resins. Dent Mater 22 (2006) 1-7
7. Atai M., Watts D.C., and Atai Z. Shrinkage strain-rates of dental resin-monomer and composites Systems. Biomaterials 26 (2005) 5015-5020
8. Braga R.R., Ballester R.Y., and Ferracane J.L. Factors involved in the development of polymerization shrinkage stress in resin-composites: a systematic review. Dent Mater 21 (2005) 962-970
9. Watts D.C., and Hindi A.A. Intrinsic 'soft-start' polymerization shrinkage-kinetics in an acrylate-besed resin-composite. Dent Mater 15 (1999) 39-45
10. Gayosso C.A., Santana F.B., Ibarra J.G., Espinola G.S., and Martinez M.A.C. Calculation of contraction rates due to shrinkage in light-cured composites. Dent Mater 20 (2004) 228-235
11. Baroudi K., Saleh A.M., Silikas N., and Watts D.C. Shrinkage behaviour of flowable resin-composites related to conversion and filler-fraction. J Dent 35 (2007) 651-655
12. Stansbury J.W., and Dickens S.H. Determination of double bond conversion in dental resins by near infrared spectroscopy. Dent Mater 17 (2001) 71-79
13. Sakaguchi R.L., Wiltbank B.D., and Shah N.C. Critical configuration analysis of four methods for measuring polymerization shrinkage strain of composites. Dent Mater 20 (2004) 388-396
14. Watts D.C., and Cash A.J. Determination of polymerization shrinkage kinetics in visible-light-cured materials: methods development. Dent Mater 7 (1991) 281-287
15. Carmichael A.J., Gibson J.J., and Walls A.W. Allergic contact dermatitis to bisphenol-A-glycidyldimethacrylate (Bis-GMA) dental resin associated with sensitivity to epoxy resin. Br Dent J 8 (1997) 8-297
16. Hansel C., Leyhausen G., Mai U.E., and Geurtsen W. Effetcs of various resin composite (co) monomers and extracts on two caries-associated micro-organisms in vitro. J Dent Res 1 (1998) 7-60
17. Silikas N., Eliades G., and Watts D.C. Light intensity effects on resin-composite degree of conversion and shrinkage strain. Dent Mater 16 (2000) 292-296
18. Dewaele M., Truffier-Boutry D., Leloup G., and Devaux J. Volume contraction in photocured dental resins: the shrinkage-conversion relationship revised. Dent Mater 22 (2006) 359-365
19. Kim S., and Jang J. The measurement of degree of conversion for BisGMA/silica composites by FT-IR spectroscopy. Polym Test 15 (1996) 559-571
20. Ferracane J.L., and Greener E.H. Fourier transform infrared analysis of degree of polymerization in unfilled resins-methods comparison. J Dent Res 8 (1984) 1093-1095
21. Stansbury J.W., and Dickens S.H. Determination of double bound conversion in dental resins by near infrared spectroscopy. Dent Mat 17 (2001) 71-79
22. Imazato S., McCabe J.F., Tarumi H., Ehara A., and Ebisu S. Degree of conversion of composites measured by DTA and FTIR. Dent Mater 17 (2001) 178-183
23. Amirouche A., Mouzali M., and Watts D.C. Radiopacity Evaluation of BisGMA/TEGDMA/opaque mineral filler dental composites. J Appl Polym Sci 104 (2007) 1632-1639
24. Halvorson R.H., Erickson R.L., and Davidson C.L. The effect of filler and silane content on conversion of resin-based composite. Dent Mater 19 (2003) 327-333
25. Watts D.C., and Cash A.J. Kinetic measurements of photo-polymerization contraction in resins and composites. Meas Sci Technol 2 (1991) 788-794
26. Watts D.C., and Marouf A.S. Optimal specimen geometry in bonded-disk shrinkage-strain measurements on light-cured biomaterials. Dent Mater 16 (2000) 447-451
27. Weinmann W., Thalacker C., and Guggenberger R. Siloranes in dental composites. Dent Mater 21 (2005) 68-74
28. Atai M., Nekoomanesh M., Hashemi S.A., and Amani S. Physical and mechanical properties of an experimental dental composite based on a new. Dent Mater 20 (2004) 663-668
29. Peutzfeldt A. Resin composites in dentistry: the monomer system. Eur J Oral Sci 105 (1997) 97-116
30. Gertsten W. Substances released from dental resin composites and glass ionomer cements. Eur J Oral Sci 106 (1998) 687-695
31. Garoushi S., Vallitu P.K., Watts D.C., and Lassila L.V.J. Effects of nanofiller fractions and temperature on polymerization shrinkage on glass fiber reinforced filling material. Dent Mater 24 (2007) 606-610