Effect of processing induced particle alignment on the fracture toughness and fracture behavior of multiphase dental ceramics

Dental Materials

Volumn 25, Issue 11, 2009, Pages 1293-1301

  Gonzaga, Carla C ^a,b   Okada, Cristina Yuri ^a   Cesar, Paulo F ^a   Miranda Jr , Walter G ^a   Yoshimura, Humberto N ^c  

^a UNIVERSITY OF SÃO PAULO   (Brazil)

^b POSITIVO UNIVERSITY   (Brazil)

^c Federal University   (Brazil)

Author keywords

Anisotropy; Dental ceramics; Fracture toughness; Microstructure; Particle alignment; X ray diffraction

Indexed keywords

3-POINT BENDING; ALUMINA COMPOSITES; ANISOTROPIC MICROSTRUCTURES; BIAXIAL FLEXURE; BIAXIAL TESTING; BIAXIAL TESTS; DENTAL CERAMIC; DENTAL CERAMICS; DISK SPECIMENS; FRACTOGRAPHIC ANALYSIS; FRACTURE BEHAVIOR; FRACTURE TOUGHNESS VALUES; HIGH ASPECT RATIO; INDENTATION STRENGTH METHODS; ISOTROPIC MICROSTRUCTURES; LITHIUM DISILICATE GLASS; MICRO-STRUCTURAL; MICROSTRUCTURAL ANALYSIS; MICROSTRUCTURAL PATHS; PARTICLE ALIGNMENT; PARTICLE DEPOSITIONS; SECOND PHASE PARTICLES; SLIP CASTING; SPECIMEN GEOMETRY;

ALIGNMENT; ANISOTROPY; ASPECT RATIO; DENTAL MATERIALS; DIFFRACTION; DISKS (MACHINE COMPONENTS); DISKS (STRUCTURAL COMPONENTS); FRACTURE; FRACTURE TESTING; GLASS CERAMICS; LITHIUM; MICROSTRUCTURE; PORCELAIN; PRESSING (FORMING); SCANNING ELECTRON MICROSCOPY; SECONDARY BATTERIES; X RAY DIFFRACTION; X RAY DIFFRACTION ANALYSIS;

FRACTURE TOUGHNESS;

ALUMINUM OXIDE; ALUMINUM SILICATE; APATITE; BIOMEDICAL AND DENTAL MATERIALS; D.SIGN CERAMIC; EMPRESS 2; GLASS; GLASS CERAMICS; IN CERAM ALUMINA; IN-CERAM ALUMINA; IPS EMPRESS CERAMIC; IPS-EMPRESS CERAMIC; LEUCITE; LITHIA DISILICATE; LITHIUM DERIVATIVE;

ALGORITHM; ANISOTROPY; ARTICLE; CERAMICS; CHEMISTRY; COMPARATIVE STUDY; ELECTRON PROBE MICROANALYSIS; HUMAN; MATERIALS TESTING; MECHANICAL STRESS; MECHANICS; PHYSICAL CHEMISTRY; SCANNING ELECTRON MICROSCOPY; SURFACE PROPERTY; TOOTH BRUSHING; TOOTH PROSTHESIS; X RAY DIFFRACTION;

ALGORITHMS; ALUMINUM OXIDE; ALUMINUM SILICATES; ANISOTROPY; APATITES; CERAMICS; DENTAL MATERIALS; DENTAL POLISHING; DENTAL PORCELAIN; ELECTRON PROBE MICROANALYSIS; GLASS; HUMANS; LITHIUM COMPOUNDS; MATERIALS TESTING; MECHANICAL PHENOMENA; MICROSCOPY, ELECTRON, SCANNING; PHYSICOCHEMICAL PHENOMENA; STRESS, MECHANICAL; SURFACE PROPERTIES; X-RAY DIFFRACTION;

EID: 70349412962     PISSN: 01095641     EISSN: None     Source Type: Journal    
DOI: 10.1016/j.dental.2009.03.013     Document Type: Article

References (27)

1. Cesar P.F., Gonzaga C.C., Miranda Jr. W.G., and Yoshimura H.N. Effect of ion exchange on hardness and fracture toughness of dental porcelains. J Biomed Mater Res B Appl Biomater 83 (2007) 538-545
2. Cesar P.F., Yoshimura H.N., Miranda Jr. W.G., Miyazaki C.L., Muta L.M., and Rodrigues Filho L.E. Relationship between fracture toughness and flexural strength in dental porcelains. J Biomed Mater Res B Appl Biomater 78 (2006) 265-273
3. Yoshimura H.N., Cesar P.F., Miranda Jr. W.G., Gonzaga C.C., Okada C.Y., and Goldenstein H.J. Fracture toughness of dental porcelains evaluated by IF, SCF and SEPB methods. J Am Ceram Soc 88 (2005) 1680-1683
4. Giordano II R.A., Pelletier L., Campbell S., and Pober R. Flexural strength of an infused ceramic, glass ceramic, and feldspathic porcelain. J Prosthet Dent 73 (1995) 411-418
5. Morena R., Lockwood P.E., and Fairhurst C.W. Fracture toughness of commercial dental porcelains. Dent Mater 2 (1986) 58-62
6. Cesar P.F., Soki F.N., Yoshimura H.N., Gonzaga C.C., and Styopkin V. Influence of leucite content on slow crack growth of dental porcelains. Dent Mater 24 (2008) 1114-1122
7. Ali S.M. Prediction of the service life of dental porcelains by the measurements of post-indentation slow crack growth. Dent Mater J 12 (1993) 45-53
8. Cattell M.J., Clarke R.L., and Lynch E.J. The biaxial flexural strength and reliability of four dental ceramics-part II. J Dent 25 (1997) 409-414
9. Gorman C.M., McDevitt W.E., and Hill R.G. Comparison of two heat-pressed all-ceramic dental materials. Dent Mater 16 (2000) 389-395
10. Probster L., and Diehl J. Slip-casting alumina ceramics for crown and bridge restorations. Quintessence Int 23 (1992) 25-31
11. Guazzato M., Albakry M., Swain M.V., and Ironside J. Mechanical properties of In-Ceram Alumina and In-Ceram Zirconia. Int J Prosthodont 15 (2002) 339-346
12. Albakry M., Guazzato M., and Swain M.V. Fracture toughness and hardness evaluation of three pressable all-ceramic dental materials. J Dent 31 (2003) 181-188
13. Albakry M., Guazzato M., and Swain M.V. Biaxial flexural strength, elastic moduli, and X-ray diffraction characterization of three pressable all-ceramic materials. J Prosthet Dent 89 (2003) 374-380
14. Oh S.C., Dong J.K., Luthy H., and Scharer P. Strength and microstructure of IPS Empress 2 glass-ceramic after different treatments. Int J Prosthodont 13 (2000) 468-472
15. Ong J.L., Farley D.W., and Norling B.K. Quantification of leucite concentration using X-ray diffraction. Dent Mater 16 (2000) 20-25
16. Guazzato M., Albakry M., Ringer S.P., and Swain M.V. Strength, fracture toughness and microstructure of a selection of all-ceramic materials. Part I. Pressable and alumina glass-infiltrated ceramics. Dent Mater 20 (2004) 441-448
17. Chawla K.K. Ceramic matrix composites. 1st ed. (1993), Chapman & Hall, London
18. Albakry M., Guazzato M., and Swain M.V. Influence of hot pressing on the microstructure and fracture toughness of two pressable dental glass-ceramics. J Biomed Mater Res B Appl Biomater 71 (2004) 99-107
19. Sorensen J.A., Cruz M., Mito W.T., Raffeiner O., Meredith H.R., and Foser H.P. A clinical investigation on three-unit fixed partial dentures fabricated with a lithium disilicate glass-ceramic. Pract Periodontics Aesthet Dent 11 (1999) 95-106 [quiz 108]
20. Sorensen J.A., Kang S.K., Torres T.J., and Knode H. In-Ceram fixed partial dentures: three-year clinical trial results. J Calif Dent Assoc 26 (1998) 207-214
21. Quinn J.B., Quinn G.D., Kelly J.R., and Scherrer S.S. Fractographic analyses of three ceramic whole crown restoration failures. Dent Mater 21 (2005) 920-929
22. Cattell M.J., Clarke R.L., and Lynch E.J. The transverse strength, reliability and microstructural features of four dental ceramics-part I. J Dent 25 (1997) 399-407
23. Gonzaga C.C., Okada C.Y., Cesar P.F., Frederici C., Beneduce Neto F., and Yoshimura H.N. Mechanical properties and porosity of a dental glass-ceramic hot-pressed with different temperatures. Mater Res 11 (2008) 303-308
24. ASTM-C1161. Standard test method for flexural strength for advanced ceramics at ambient temperature (2002), American Society for Testing Materials, West Conshohocken
25. Chantikul P., Anstis G.R., Lawn B.R., and Marshall D.B. A critical evaluation of indentation techniques for measuring fracture toughness. II. Strength method. J Am Ceram Soc 64 (1981) 539-543
26. Cesar P.F., Yoshimura H.N., Miranda Junior W.G., and Okada C.Y. Correlation between fracture toughness and leucite content in dental porcelains. J Dent 33 (2005) 721-729
27. Gonzaga CC. Crescimento de trinca subcrítico em cerâmicas odontológicas: efeito do material e do método de ensaio (Slow crack gowth in dental ceramics: effect of material's microstructure and test method). PhD thesis. University of São Paulo; 2007.