Digital self-tuning controllers: Algorithms, implementation and applications

Advanced Textbooks in Control and Signal Processing

Volumn , Issue 9781852339807, 2005, Pages 1-315

  Bobál, Vladimír ^a   Böhm, Josef ^b   Fessl, Jaromír ^c   Macháček, Jiří ^d  

^a TOMAS BATA UNIVERSITY IN ZLIN   (Czech Republic)

^b INSTITUTE OF INFORMATION THEORY AND AUTOMATION   (Czech Republic)

^c Consultant in Control Engineering ^*  (Czech Republic)

^d UNIVERSITY OF PARDUBICE   (Czech Republic)

Author keywords

[No Author keywords available]

Indexed keywords

CONTROL ENGINEERING; ELECTRICAL ENGINEERING;

SELF-TUNING CONTROLLERS;

SIGNAL PROCESSING;

EID: 70349393953     PISSN: 14392232     EISSN: 25103814     Source Type: Book Series    
DOI: None     Document Type: Chapter

References (135)

1. R. Bellman, Adaptive Control - A Guided Tour. Princeton University Press, 1961.
2. Y. Z. Tsypkin, Adaptation and Learning in Automatic Systems. New York: Academic Press, 1971.
3. K. J. Åström, “Theory and applications of adaptive control,” Automatica, vol. 19, no. 5, pp. 471–486, 1983.
4. G. C. Goodwin and K. S. Sinn, Adaptive Filtering, Prediction and Control. Englewood Cliffs, New Jersey: Prentice Hall, 1984.
5. K. J. Åström and B. Wittenmark, Adaptive Control. Reading, Massachusetts: Addison-Wesley Publishing Company, 1989.
6. P. Wellstead and M. Zarrop, Self-tuning Systems. Chichester: John Wiley & Sons, 1991.
7. N. M. Filatov and H. Unbehauen, Adaptive Dual Control: Theory and Applications. Berlin Heidelberg New York: Springer-Verlag, 2004.
8. J. Maršík and V. Strejc, “Application of identification-free algorithms for adaptive control,” Automatica, vol. 25, pp. 225–228, 1989.
9. K. J. Åström and T. Hägglund, Automatic Tuning of PID Controllers. Research Triangle Park, North Carolina: Instrument Society of America, 1988.
10. K. J. Åström and T. Hägglund, “Automatic tuning of simple regulators with specifications on phase and amplitude margins,” Automatica, vol. 20, pp. 645– 651, 1984.
11. K. J. Åström and T. Hägglund, PID Controllers: Theory, Design and Tuning. Research Triangle Park, North Carolina: Instrument Society of America, 1995. 2nd Edition.
12. T. W. Kraus and T. J. Myron, “Self-tuning PID controller uses pattern recognition approach,” Control Engineering, vol. June, pp. 106–111, 1984.
13. Y. Nishikawa, N. Sannomia, T. Ohta, and H. Tanaka, “A method for auto-tuning of PID control parameters,” Automatica, vol. 20, pp. 321–332, 1984.
14. K. J. Åström, C. C. Hang, P. Persson, and W. K. Ho, “Towards intelligent PID control,” Automatica, vol. 28, pp. 1–9, 1992.
15. W. K. Ho, C. C. Hang, and L. S. Cao, “Tuning of PID contollers based on gain and phase margin specifications,” Automatica, vol. 31, pp. 497–502, 1995.
16. I. D. Landau, Adaptive Control – the Model Reference Approach. New York: Marcel Dekker, 1979.
17. P. A. Ioannou, Robust Adaptive Control. Englewood Cliffs, New Jersey: Prentice Hall, 1996.
18. A. Feldbaum, “Theory of dual control,” Autom. Remote Control, vol. 21, no. 9, 1960.
19. R. E. Kalman, “Design of a self optimizing control system,” Trans. ASME, vol. 80, pp. 481–492, 1958.
20. V. Peterka, “Adaptive digital regulation of noisy systems,” in Preprints of the 2nd IFAC Symposium on Identification and Process Parameter Estimation, p. 6.2, Prague: ÚTIA ČSAV, 1970.
21. K. J. Åström and B. Wittenmark, “On self-tuning regulators,” Automatica, vol. 9, pp. 185–199, 1973.
22. D. W. Clarke and P. J. Gawthrop, “Self-tuning controller,” Proc. IEE, vol. 122, pp. 929–934, 1975.
23. D. W. Clarke and P. J. Gawthrop, “Self-tuning control,” Proc. IEE, vol. 126, pp. 633–640, 1979.
24. V. Peterka, “Predictor-based self-tuning control,” Automatica, vol. 20, no. 1, pp. 39–50, 1984. Reprinted in: Adaptive Methods for Control System Design, Editor M.M. Gupta, IEEE Press, 1986.
25. M. Kárný, A. Halousková, J. Böhm, R. Kulhavý, and P. Nedoma, “Design of linear quadratic adaptive control: Theory and algorithms for practice,” Kybernetika, vol. 21, 1985. Supplement to No. 3,4,5, 6.
26. J. Böhm, A. Halousková, M. Kárný, and V. Peterka, “Simple LQ self-tuning controllers,” in Preprints of 9th IFAC World Congress, vol. 8, pp. 171–176, 1984.
27. P. E. Wellstead, J. M. Edmunds, D. I. Prager, and P. M. Zanker, “Pole zero assigment self-tuning regulator,” International Journal of Control, vol. 30, pp. 1–26, 1979.
28. K. J. Åström and B. Wittenmark, “Self-tuning controller based on pole-zero placement,” IEE-Procedings D, vol. 127, pp. 120–130, 1980.
29. D. W. Clarke, C. Mohtadi, and P. S. Tuffs, “Generalized predictive control – part i. the basic algorithm,” Automatica, vol. 23, pp. 137–148, 1987.
30. D. Clarke, C. Mohtadi, and P. Tuffs, “Generalized predictive control,” Automatica, vol. 23, no. 2, pp. 137–160, 1987.
31. P. J. Gawthrop, “Hybrid self-tuning control,” IEE-Procedings D, vol. 127, pp. 229–236, 1980.
32. C. Bányász and L. Keviczky, “Direct methods for self-tuning PID regulators,” in Proc. 6th IFAC Symposium on Identification and System Parameter Estimation, pp. 1249–1254, 1982.
33. V. Bobál, J. Böhm, and R. Prokop, “Practical aspects of self-tuning controllers,” International Journal of Adaptive Control and Signal Processing, vol. 13, pp. 671–690, 1999.
34. R. Kulhavý and F. J. Kraus, “On duality of regularized exponential and linear forgetting,” Automatica, vol. 32, pp. 1403–1415, 1996.
35. J.Lampinen and I. Zelinka, New Ideas in Optimization - Mechanical Engineering Design Optimization by Differential Evolution, vol. 1. McGraw-Hill, 1999.
36. I. Zelinka, “Evolutionary identification of predictive models,” in ISF’ 2000, The 20th International Symposium on Forecasting, Lisbon, Portugal: International Institute of Forecasters, 2000.
37. C. Kar, Practical Applications of Computational Intelligence for Adaptive Control. CRC Press, 1999.
38. R. Ballini and F. Zuben, Application of Neural Networks to Adaptive Control of Nonlinear Systems. Research Studies Press Ltd, 1997.
39. H. Hellendoorn and D. Driankov, Fuzzy Model Identification. Springer Verlag, 1997.
40. J. Böhm and M. Kárný, “Merging of user’s knowledge into self-tuning controllers,” in Preprints of 4th IFAC Symposium Adaptive Control and Signal Processing ACASP’92 (I. Landau, L. Dugard, and M. M’Saad, eds), vol. 2, pp. 427–432, Grenoble: Academic Press, 1992.
41. R. Kulhavý and M. B. Zarrop, “On general concept of forgetting,” International Journal of Control, vol. 58, no. 4, pp. 905–924, 1993.
42. L. Ljung, System Identification: Theory for the User. London: Prentice-Hall, 1987.
43. T. Söderström and P. Stoica, System Identification. Englewood Cliffs, New Jersey: Prentice-Hall, 1989.
44. L. Ljung and T. Söderström, Theory and Practice of Recursive Identification. Cambridge, Massachusetts: MIT Press, 1983.
45. V. Strejc, “Least squares parameter estimation,” Automatica, vol. 16, pp. 535– 550, 1980.
46. V. Peterka, “A square-root filter for real-time multivariable regression,” Kybernetika, vol. 11, pp. 53–67, 1975.
47. G. Bierman, Factorization Methods for Discrete Sequential Estimation. New York: Academic Press, 1977.
48. V. Peterka, “Real-time parameter estimation and output prediction for ARMA-type system models,” Kybernetika, vol. 17, pp. 526–533, 1981.
49. R. Kulhavý, “Directional tracking of regression-type model parameters,” in Preprints of the 2nd IFAC Workshop on Adaptive Systems in Control and Signal Processing (Lund, Sweden), pp. 97–102, 1986.
50. R. Kulhavý, “Restricted exponential forgetting in real-time identification,” Automatica, vol. 23, no. 5, pp. 589–600, 1987.
51. M. Kubalčík and V. Bobál, “Adaptive control of coupled drives apparatus based on polynomial approach,” in Proceedings of the IEEE International Conference on Control Applications 2002, pp. 594–599, 2002.
52. V. Bobál, P. Navrátil, P. Dostál, and M. Sysel, “Delta self-tuning control MIMO systems: comparison 1dof and 2dof configurations,” in Proc. of IASTED International Conference Circuits, Signals and Systems, pp. 5–10, 2003.
53. P. Dostál, V. Bobál, and M. Blaha, “One approach to adaptive control of nonlinear processes,” in Preprints of IFAC Workshop on Adaptation and Learning in Control and Signal Processing ALCOSP (Cernobbio-Como, Italy), pp. 407– 412, 2001.
54. R. Isermann, Digital Control Systems. Berlin, Heidelberg, New York: Springer- Verlag, 1991. 2nd Edition.
55. A. Niederlińsky, Digital Systems for Control of Technological Processes: Hardware and Software. Praha: SNTL, 1984 (in Czech).
56. Y. Takahashi, C. Chan, and D. Auslander, “Parametereinstellung bei linearen DDC-algorithmen,” Regelunstechnik und Prozessdatenverarbeitung, vol. 19, pp. 237–284, 1971.
57. C. C. Hang, K. J. Åström, and W. K. Ho, “Refinements of the Ziegler–Nichols tuning formula,” IEE Procedings-D, vol. 138, pp. 111–118, 1991.
58. K. J. Åström, C. C. Hang, P. Persson, and W. K. Ho, “Towards intelligent PID control,” Automatica, vol. 28, pp. 1–9, 1992.
59. V. Bobál, J. Macháček, and R. Prokop, “Tuning of digital PID controllers based on Ziegler-Nichols method,” in Proc. of the 2nd IFAC Workshop on New Trends in Design of Control Systems (Smolenice, Slovakia), pp. 133–138, 1997.
60. J. Šindelář, “Adaptation of control system structure to the course of controlling error,” in Proc. of the 2nd IFAC Symposium on System Sensitivity and Adaptivity (Dubrovník), 1978.
61. J. Šindelář, Control Systems with Discontinuously Variable Structure. Praha: Academia, 1973 (in Czech).
62. P. D. Roberts, “Simple tuning of discrete PI and PID controllers,” Measurement and Control, vol. 9, pp. 227–234, 1975.
63. F. B. Shinskey, Process Control Systems. New York: Mc Graw Hill, 1979.
64. J. Fessl and J. Jarkovský, “Cascade control using adaptive controllers with online identification: Some problems and solutions,” in Proc. of the 10th IFAC World Congress, Vol. 10 (Munich), pp. 59–64, 1987.
65. J. Fessl and J. Jarkovský, “Cascade control of superheated steam temperature with lq self-tuning controllerss,” in Proc. of the 8th IFAC Symposium on Identification and System Parameter Estimation (Beijing), 1988.
66. A. H. Glattfelder and W. Schaufelberger, “Stability analysis of single loop control systems with saturation and anti-reset wind-up circuits,” IEEE Trans. Automatic Control, vol. 28, pp. 1074–1081, 1983.
67. L. Rundquist, Anti-reset Windup for PID Controllers. Report LUTFD2/(TRFT-1033)/ 1-143. Lund, Sweden: Lund Inst. of Tech., 1991.
68. L. Rundquist, “Anti-reset windup for PID controllers,” in Proc. of the 11th IFAC World Congress, Vol. 8, (Tallinn), pp. 146–151, 1991.
69. K. J. Åström and B. Wittenmark, Computer-Controlled Systems: Theory and Design. New Jersey: Englewood Cliffs Prentice Hall, 1984.
70. D. W. Clarke, “PID algorithms and their computer implementation,” Transactions of the Institute of Measurement and Control, vol. 6, pp. 305–316, 1984.
71. R. M. Hanus, M. Kinneart, and J. Henrotte, “Conditioning technique on general anti-windup and bumpless transfer method,” Automatica, vol. 23, pp. 729–739, 1987.
72. B. Šulc, “Integral wind-up in control and system simulation,” Control Engineering Solutions. A Practical Approach. IEE Control Engineering Series, vol. 54, pp. 61–76, 1997.
73. B. H. Bristol, “Designing and programming control algorithms for DDC systems,” Control Engineering, vol. 1, pp. 24–26, 1977.
74. A. B. Corripio and P. M. Tomkins, “Industrial application of self-tuning feedback control algorithhm,” ISA Transactions, vol. 20, pp. 3–10, 1981.
75. D. B. Dahlin, “Designing and tuning digital controllers,” Inst. Control Systems, vol. 42, pp. 77–83, 1968.
76. K. C. Chiu, A. B. Corripio, and C. L. Smith, “Digital control algorithms, part 1, Dahlin algorithm,” Inst. Control Systems, vol. 47, pp. 57–59, 1973.
77. B. Wittenmark, Self-tuning PID-controllers based on pole placement. Report LUTFD2/(TRFT-7179)/ 1-037. Lund, Sweden: Lund Inst. of Technology, 1979.
78. R. Ortega and R. Kelly, “PID self-tuners: Some theoretical and practical aspects,” IEEE Trans. Ind. Electron., vol. 31, pp. 332–338, 1984.
79. J. H. Kim and K. K. Choi, “Self-tuning discrete PID controller,” IEEE Trans. Automatic Control, vol. 34, pp. 298–300, 1987.
80. J. H. Kim and K. K. Choi, “Design of direct pole placement PID self-tuners,” IEEE Trans. Automatic Control, vol. 34, pp. 351–356, 1987.
81. R. Kofahl and R. Isermann, “A simple method for automatic tuning of PID-controllers based on process parameter estimation,” in Proc. American Control Conference (Boston), pp. 1143–1148, 1985.
82. F. Radke and R. Isermann, “A parameter-adaptive PID controller with stepwise parameter optimization,” Automatica, vol. 23, pp. 449–457, 1987.
83. S. Tzaseftas and G. Kapsiotis, “PID self-tuning control combining pole-placement and parameter optimization features,” in Proc. IMACS/IFAC Second International Symposium on Mathematical and Intelligent Models in System Simulation, Vol. II (Brussels), pp. 30–40, 1993.
84. P. J. Gawthrop, Using the self-tuning controller to tune PID regulators. Report No. CE/T/2. Brighton: School of Appl. Sci., Univ. Sussex, 1982.
85. P. Neuman, “Industrial adaptive regulator with discontinuously structure,” in Proc. of IFAC Workshop Evaluation of Adaptive Control Strategies in Industrial Applications (Tbilisi), pp. 281–288, 1989.
86. M. Alexík, “Adaptive self-tuning algorithm based on continuous synthesis,” in Proc. of the 2nd IFAC Workshop on New Trends in Design of Control Systems, (Smolenice, Slovakia), pp. 481–486, 1997.
87. C. Bányász and L. Keviczky, “Direct methods for self-tuning PID controllers,” in Proc. of the 6th IFAC Symposium on Identification and System Parameter Estimation, (Washington), pp. 1249–1254, 1982.
88. C. Bányász and L. Keviczky, “Design of adaptive PID regulators based on recursive estimation of the process parameters,” Journal of Process Control, vol. 3, pp. 53–59, 1993.
89. J. Böhm, A. Halousková, M. Kárný, and V. Peterka, “Simple lq self-tuning controllers,” in Proc. of the 9th Triennial World Congress of IFAC (Budapest), pp. 961–966, 1984.
90. M. Vítečková, A. Víteček, and L. Smutný, “Simple PI and PID controllers tuning for monotone self-regulating plants,” in Proc. of the IFAC Workshop Digital Control: Past, Present and Future of PID Control (Terrassa, Spain), pp. 259–264, 2000.
91. M. Vítečková, A. Víteček, and L. Smutný, “Controller tuning for controlled plants with time delay,” in Proc. of the IFAC Workshop Digital Control: Past, Present and Future of PID Control, (Terrassa, Spain), pp. 253–258, 2000.
92. V. Bobál, P. Dostál, J. Macháček, and M. Vítečková, “Self-tuning PID controllers based on dynamics inversion method,” in Proc. of the IFAC Workshop Digital Control: Past, Present and Future of PID Control, (Terrassa, Spain), pp. 167–172, 2000.
93. V. Bobál, Auto-Tuning of Digital PID Controllers Using Recursive Identification. Report ESR 9409. Bochum: Faculty of Electrical Engineering, Ruhr-University, 1994.
94. V. Bobál, “Self-tuning Ziegler-Nichols PID controller,” International Journal of Adaptive Control and Signal Processing, vol. 9, pp. 213–226, 1995.
95. V. Bobál, “Robust self-tuning PID controller,” in Proc: 1st IFAC Workshop on New Trends in Design of Control Systems (Smolenice, Slovakia), pp. 312–317, 1994.
96. V. Bobál, J. Macháček, and R. Prokop, “Practical tuning of industrial PID controllers,” in Proc. of the IFAC-IFIP-IMACS Conference Control of Industrial Systems (University of Belfort), pp. 37–42, 1997.
97. J. Macháček and V. Bobál, “Adaptive PID controller with time delay,” in Proc. of the European Control Conference ECC99 (Karlsruhe), pp. paper BA – 12 – 5, 1999.
98. J. Macháček and V. Bobál, “Adaptive PID controller with on-line identification,” Journal of Electrical Engineering, vol. 53, pp. 233–240, 2002.
99. C. Bányász, J. Hetthessy, and L. Keviczky, “An adaptive PID regulator dedicated for microprocessor based compact controllers,” in Proc. of the 7th IFAC Symposium on Identification and System Parameter Estimation, (York), pp. 1299–1304, 1985.
100. L. Keviczky and C. Bányász, “A completely adaptive PID regulator,” in Proc. of the 8th IFAC Symposium on Identification and System Parameter Estima tion (Beijing), pp. 91–97, 1988.
101. K. J. Åström and B. Wittenmark, “Simple self-tuning controllers,” in Proc. Symposium on Methods and Applications in Adaptive Control (Bochum), pp. 21–30, 1980.
102. V. Bobál, M. Kubalčík, and M. Úlehla, “Auto-tuning of digital PID controllers using recursive identification,” in Proc. of the 5th IFAC Symposium on Adaptive Systems in Control and Signal Processing (Budapest), pp. 384–389, 1995.
103. J. G. Ziegler and N. B. Nichols, “Optimum settings for automatic controllers,” Trans. ASME, vol. 64, pp. 759–768, 1942.
104. H. Cui and E. W. Jacobsen, “Performance limitations in decentralized control,” Journal of Process Control, vol. 12, pp. 485–494, 2002.
105. V. Kučera, Discrete Linear Control: The Polynomial Equation Approach. Chichester: John Wiley, 1979.
106. V. Kučera, Analysis and Design of Discrete Linear Control Systems. London: Prentice Hall, 1991.
107. M. Vidyasagar, Control System Synthesis: A Factorization Approach. Cambridge MA, MIT Press, 1985.
108. V. Kučera, “Equations in control a survey,” Automatica, vol. 29, pp. 1361– 1375, 1993.
109. M. Šebek, The Polynomial Toolbox 2 Manual. Prague: Polyx, 1999.
110. V. Kučera, “A dead-beat servo problem,” Int. J. Control, vol. 32, pp. 107–113, 1980.
111. M. Šebek, “Multivariable dead-beat servo problem,” Kybernetika, vol. 16, pp. 442–453, 1980.
112. S. M. Shinners, Advanced Modern Control System Theory and Design. New York: John Wiley, 1998.
113. M. Šebek and V. Kučera, “Polynomial approach to quadratic tracking in discrete linear systems,” IEEE Trans. Automatic Control, vol. AC-27, pp. 1248–1250, 1982.
114. J. Böhm, M. Kárný, and A. Halousková, “LQ optimization with irregular input-output sampling: Algorithmic and complexity aspects,” in Preprints of the European IEEE Workshop CMP’94 (L. Kulhavá, M. Kárný, and K. Warwick, eds), pp. 265–268, Prague: ÚTIA AVČR, 1994.
115. J. Böhm, “On algorithmic problems related to multivariate adaptive LQG controllers,” in Symposium on Control, Optimization and Supervision, CESA’96, pp. 310–314, 1996.
116. I. D. Landau, D. Rey, A. Karimi, A. Voda, and A. Franco, “A flexible transmition system as a benchmark for robust digital control,” European Journal of Control, vol. 1, pp. 77–96, 1995.
117. B. Wittenmark, “An active suboptimal dual controller for systems with stochastic parameters,” Automatic Control Theory and Application, vol. 3, no. 1, pp. 13–19, 1975.
118. V. Peterka, “Digital control of processes with random disturbances and uncertain characteristics,” Technical Report, ÚTIA AVČR, POB 18, 18208 Prague 8, CR, 1975 in Czech.
119. J. Böhm, “LQ self-tuners with signal level constraints,” in Preprints of the 7th IFAC/IFIP Symposium on Identification and System Parameter Estimation, vol. 1, pp. 131–137, 1985.
120. J. Böhm and M. Kárný, “Self-tuning regulators with restricted inputs,” Kybernetika, vol. 18, no. 6, pp. 529–544, 1982.
121. R. Bitmead, M. Gevers, and V. Wertz, Adaptive Optimal Control. The Thinking Man’s GPC. Prentice Hall, 1990.
122. C. E. de Souza, “Monotonicity and stabilizability results for the solutions of the Riccati difference equation,” in Preprints of the Workshop on the Riccati Equation in Control, Systems and Signals, pp. 38–41, 1989.
123. W. H. Kwon and A. E. Pearson, “On feedback stabilization of time-varying discrete linear systems,” IEEETransactions on Automatic Control, vol. AC-23, pp. 479–481, 1978.
124. J. Böhm, “The set point control and offset compensation in the discrete LQ adaptive control,” Problems of Control and Information Theory, vol. 17, no. 3, pp. 33–46, 1988.
125. B. D. O. Anderson and J. Moore, Optimal Control. Linear Quadratic Method. London: Prentice-Hall, 1989.
126. P. Nedoma, and M. Kárný and J. Böhm, “Designer: Preliminary tuning of adaptive controllers,” in Proceeding of the 2nd scientific–technical Conference PROCESS CONTROL, Horní Bečva, 1996 (J. Krejčí, ed.), pp. 225–228, 1996.
127. P. Nedoma, and M. Kárný and J. Böhm, ABET: Adaptive Bayesian Estimation Toolbox for MATLAB. Prague, Czech Republic: ÚTIA AV ČR, 1996.
128. J. Böhm, “Experiments with LQ adaptive controller in the heat exchanger station at STU Bratislava,” Technical Report 1919, ÚTIA AVČR, P.O.Box 18, 182 08 Prague, Czech Republic, 1998.
129. J. Fessl, “An application of multivariable self-tuning regulators to drum boiler control,” Automatika, vol. 22, pp. 581–585, 1986.
130. V. Bobál, J. Böhm, and P. Chalupa, “Matlab-toolbox for CAD of simple selftuning controllers,” in Proc. of the 7th IFAC Workshop on Adaptation and Learning in Control and Signal Processing (Cernobbio-Como, Italy), pp. 273– 278, 2001.
131. V. Bobál and P. Chalupa, Self-tuning Controllers Simulink Library. Zlín: Tomas Bata University in Zlín, Faculty of Technology, 2002. http://www.utb.cz/stctool/.
132. P. Chalupa, Discrete Decentralized Control Systems. Ph.D. Thesis. Zlín: Tomas Bata University in Zlín, Faculty of Technology, 2003.
133. P. Zelinka, B. Rohal’-Ilkiv, and A. Kuznetsov, “Experimental verification of stabilizing predictive control,” Control Engineering Practice, vol. 7, pp. 601– 610, 1999.
134. J. Fessl and J. Jarkovský, “Steam superheater control via self-tuning regulator,” in Preprints of IFAC Symposium on Digital Computer Applications to Process Control, Vienna: Academic Press, 1985.
135. J. Fessl, “LQ self-tuning controllers with varying cost function weight,” in Preprints of Proc. of IFAC Symposium ITAC 91 on Intelligent Tuning and Adaptive Control, Singapore: Academic Press, 1991.