Design methodology for a miniaturized frequency selective surface using lumped reactive components

IEEE Transactions on Antennas and Propagation

Volumn 57, Issue 9, 2009, Pages 2732-2738

  Liu, Hui Lai ^a   Ford, Kenneth Lee ^a   Langley, Richard J ^a  

^a UNIVERSITY OF SHEFFIELD   (United Kingdom)

Author keywords

Frequency selective surfaces (FSS)

Indexed keywords

BAND PASS; CURRENT LOOP; DESIGN METHODOLOGY; FREQUENCY SELECTIVE SURFACES (FSS); FREQUENCY-SELECTIVE SURFACES; FULL-FIELD; INDUCTIVE ELEMENTS; LUMPED COMPONENTS; METALLIC PATCHES; OBLIQUE INCIDENCE; REACTIVE COMPONENTS; RESONANT FREQUENCIES; UNIT CELLS;

CELL MEMBRANES; ELECTRIC FILTERS; ELECTROMAGNETIC WAVE POLARIZATION; NATURAL FREQUENCIES;

DIPOLE ANTENNAS;

EID: 70349260519     PISSN: 0018926X     EISSN: None     Source Type: Journal    
DOI: 10.1109/TAP.2009.2027174     Document Type: Article

References (29)

1. C. K. Lee, R. J. Langley, and E. A. Parker, "Single-layer multiband frequency-selective surfaces, Proc. Inst. Elect. Eng. Microw. Antennas Propag., vol. 132, no. 6, pt. H, pp. 411-412, 1985.
2. T. K. Wu, Frequency Selective Surface and Grid Arrays. New York: Wiley, 1995.
3. B. A. Munk, Frequency Selective Surfaces: Theory and Design. New York: Wiley, 2000.
4. R. A. Hill and B. A. Munk, "The effect of perturbating a frequencyselective surface and its relation to the design of a dual-band surface," IEEE Trans. Antennas Propag., vol. 44, no. 3, pp. 368-374, Mar. 1996.
5. T. K. Wu and S. W. Lee, "Multiband frequency-selective surface with multiring patch elements," IEEE Trans. Antennas Propag., vol. 42, no. 11, pp. 1484-1490, Nov. 1994.
6. T. K. Wu, "4-band frequency-selective surface with double-squareloop patch elements," IEEE Trans. Antennas Propag., vol. 42, no. 12, pp. 1659-1663, Dec. 1994.
7. A. D. Chuprin, E. A. Parker, and J. C. Batchelor, "Convoluted double square: Single layer FSS with close band spacings," Electron. Lett. vol. 36, no. 22, pp. 1830-1831, Oct. 2000.
8. R. J. Langley and E. A. Parker, "Double-square frequency-selective surfaces and their equivalent-circuit," Electron. Lett., vol. 19, no. 17, pp. 675-677, 1983.
9. J. Romeu and Y. Rahmat-Samii, "Fractal FSS: A novel dual-band frequency selective surface," IEEE Trans. Antennas Propag., vol. 48, no. 7, pp. 1097-1105, Jul. 2000.
10. B.Widenberg, S. Poulsen, and A. Karlsson, "Scattering from thick frequency selective screens," J. Electromagn. Waves Applicat., vol. 14, no. 9, pp. 1303-1328, 2000.
11. G. I. Kiani, K. P. Esselle, and K. L. Ford et al., "Angle and polarizationindependent bandstop frequency selective surface for indoor wireless systems," Microw. Opt. Technol. Lett., vol. 50, no. 9, pp. 2315-2317, Sep. 2008.
12. B. A. Munk, R. J. Luebbers, and R. D. Fulton, "Transmission through a 2-layer array of loaded slots," IEEE Trans. Antennas Propag., vol. AP22, no. 6, pp. 804-809, 1974.
13. K. L. Ford and B. Chambers, "Geometric transition absorber with improved low frequency performance," in Proc. IEEE Antennas and Propag. Society Int. Symp., Jul. 2006, pp. 1955-1958.
14. K. L. Ford and B. Chambers, "Improvement in the low frequency performance of geometric transition radar absorbers using square loop impedance layers," IEEE Trans. Antennas Propag., vol. 56, no. 1, pp. 133-141, Jan. 2008.
15. G. I. Kiani, K. L. Ford, and K. P. Esselle et al., "Oblique incidence performance of a novel frequency selective surface absorber," IEEE Trans. Antennas Propag., vol. 55, no. 10, pp. 2931-2934, Oct. 2007.
16. B. A. Munk, P. Munk, and J. Pryor, "On designing Jaumann and circuit analog absorbers (CA absorbers) for oblique angle of incidence," IEEE Trans. Antennas Propag., vol. 55, no. 1, pp. 186-193, Jan. 2007.
17. C. Mias, "Varactor tunable frequency selective absorber," Electron. Lett., vol. 39, no. 14, pp. 1060-1062, Jul. 2003.
18. T. K. Chang, R. J. Langley, and E. A. Parker, "Active frequency-selective surfaces," Proc. Inst. Elect. Eng. Microw. Antennas Propag., vol. 143, no. 1, pp. 62-66, Feb. 1996.
19. B. Chambers, A. Tennant, and A. Melnikov, "Detection of a radar signal reflected from a phase-modulated surface," Proc. Inst. Elect. Eng. Radar Sonar and Navigation, vol. 153, no. 4, pp. 316-324, Aug. 2006.
20. B. M. Cahill and E. A. Parker, "Field switching in an enclosure with active FSS screen," Electron. Lett., vol. 37, no. 4, pp. 244-245, Feb. 2001.
21. G. I. Kiani, K. L. Ford, and K. P. Esselle et al., "Single-layer bandpass active frequency selective surface," Microw. Opt. Technol. Lett., vol. 50, no. 8, pp. 2149-2151, Aug. 2008.
22. E. A. Parker, J. B. Robertson, and B. Sanz-Izquierdo et al., "Minimal size FSS for long wavelength operation," Electron. Lett. vol. 44, no. 6, pp. 394-395, Mar. 2008.
23. R. R. Xu, H. C. Zhao, and Z. Y. Zong et al., "Dual-band capacitive loaded frequency selective surfaces with close band spacing," IEEE Microw. Wireless Compon. Lett., vol. 18, no. 12, pp. 782-784, Dec. 2008.
24. K. Sarabandi and N. Behdad, "A frequency selective surface with miniaturized elements," IEEE Trans. Antennas Propag., vol. 55, no. 5, pp. 1239-1245, May 2007.
25. F. Bayatpur and K. Sarabandi, "Single-layer high-order miniaturizedelement frequency-selective surfaces," IEEE Trans. Microw. Theory Tech., vol. 56, no. 4, pp. 774-781, Apr. 2008.
26. E. A. Parker and A. N. A. Elsheikh, "Convoluted dipole array elements," Electron. Lett., vol. 27, no. 4, pp. 322-323, Feb. 1991.
27. F. Huang, J. C. Batchelor, and E. A. Parker, "Interwoven convoluted element frequency selective services with wide bandwidths," Electron. Lett., vol. 42, no. 14, pp. 788-790, Jul. 2006.
28. H. Liu, K. L. Ford, and R. J. Langley, "Miniaturised bandpass frequency selective surface with lumped components," Electron. Lett., vol. 44, no. 18, pp. 1054-1055, Aug. 2008.
29. G. F. Engen and C. A. Hoer, "Thru-reflect-line - Improved technique for calibrating the dual 6-port automatic network analyzer," IEEE Trans. Microw. Theory Tech., vol. 27, no. 12, pp. 987-993, 1979.