Two-phase friction factor obtained from various void fraction models during condensation of R134A in vertical downward flow at high mass flux

2008 Proceedings of the ASME Summer Heat Transfer Conference, HT 2008

Volumn 2, Issue , 2009, Pages 193-206

  Dalkilic, Ahmet Selim ^a   Laohalertdecha, Suriyan ^b   Wongwises, Somchai ^b  

^a YILDIZ TECHNICAL UNIVERSITY   (Turkey)

^b KING MONGKUT'S UNIVERSITY OF TECHNOLOGY THONBURI   (Thailand)

Author keywords

[No Author keywords available]

Indexed keywords

ANNULAR FLOWS; ANNULAR TWO-PHASE FLOW; CONDENSATION HEAT TRANSFER; CONDENSING TEMPERATURE; DOWNWARD FLOW; EFFECT OF VOIDS; EXPERIMENTAL SETUP; FRICTION FACTORS; GRAPHICAL INFORMATION; MASS FLUX; SMOOTH TUBES;

CONDENSATION; FRICTION; HEAT EXCHANGERS; HEAT FLUX; HEAT TRANSFER; PRESSURE EFFECTS; TRIBOLOGY; TWO PHASE FLOW; WELDING ELECTRODES;

VOID FRACTION;

EID: 70349147914     PISSN: None     EISSN: None     Source Type: Conference Proceeding    
DOI: None     Document Type: Conference Paper

References (54)

1. J. El Hajal, J.R. Thome, A. Cavallini, Condensation in horizontal tubes, part 1: two-phase flow pattern map, International Journal of Heat and Mass Transfer 46 (2003) 3349-3363.
2. C.K. Rice, The effect of void fraction correlation and heat flux assumption on refrigerant charge inventory predictions, Ashrae Transactions (1987) 341-367.
3. P.K. Vijayan, A.P. Patil, D.S. Pilkhawal, D. Saha, V. Venkat Raj, An assesment of pressure drop and void fraction correlations with data from two-phase natural circulation loops, International Heat and Mass Transfer (2000) 541-548.
4. D. Butterworth, A comparison of some void-fraction relationships for co-current gas-liquid flow. International Journal of Multiphase Flow (1975) 845-850.
5. S.M. Zivi, Estimation of steady-state steam void-fraction by means of the principle of minimum entropy production, Transactions ASME Journal of Heat Transfer Series C 86 (1975)247-52.
6. G. Rigot, Fluid capasity of an evaporator in direct expansion, Plomberie, 328 133-144, 1973. (English translation, ORNL-tr-5217, Oak Ridge National Laboratory, Oak Ridge, TN).
7. S.L. Smith, Void fractions in two-phase flow: a correlation based upon an equal velocity head model, Proc. Instn. Mech. Engrs. 36(1969)647-64.
8. S. Levy, Steam slip theoretical prediction from momentum model, Transactions ASME Journal of Heat Transfer Series C 82(1960)113-124.
9. H. Fauske, Critical two-phase, steam-water flows, Proceedings of the 1961 Heat Transfer and Fluid Mechanics Institute.Stanford University Press, Stanford, CA, 79-89.
10. J.R.S. Thorn, Prediction of pressure drop during forced circulation boiling of water. Int. J. Heat and Mass Transfer 7 (1964)709-24.
11. C.J. Baroczy, Correlation of liquid fraction in two-phase flow with application to liquid metals, Chemical Engineering Progress Symposium Series 61 (1965) 179-91.
12. D. Chisholm, Two phase flow in pipelines and heat exchangers, George Godwin in association with The Institution of Chemical Engineers, 1983, London.
13. N. Madsen, A void fraction correlation for vertical and horizontal bulk-boiling of water, AIChE J. 21 (1975) 607-608.
14. F.W. Ahrens, Heat pump modeling, simulation and design, Proc. of the NATO Advanced Study Inst.on Heat Pump Fundamentals, 1983.
15. P.L. Spedding, D.R. Spencc, Prediction of holdup in two phase flow Int. J. Engg. Fluid Mechs. 2 (1989) 109-118.
16. J. Chen, A further examination of void-fraction in annular two-phase flow, Int. J. Heat Mass Transfer 29 (1986) 1760-1763.
17. P.J. Hamersma, J. Hart, A pressure drop correlation for gas/liquid pipe flow with a small liquid holdup, Chem. Eng. Sci. 42(1987) 1187-1196.
18. R.W. Lockhart, R.C. Martinelli, Proposed correlation of data for isothermal two-phase, two-component flow in pipes, Chem. Eng. Prog. (1949) 39-18.
19. J.M. Turner, G.B. Wallis, The separate-cylinders model of two-phase flow, paper no. NYO-3114-6. Thayer's School Eng.,Dartmouth College, Hanover, NH, USA 1965.
20. G.B. Wallis, One-Dimensional Two-Phase Flow, McGraw-Hill (1965) 51-54.
21. P. Domanski, D. Didion, Computer modeling of the vapor compression cycle with constant flow area expansion device, NBS Buidling Science Series (1983) 155.
22. M.J. Wilson, T.A. Newell, J.C. Chato, CA. Infante Ferreira, Refrigerant charge, pressure drop and condensation heat transfer in flattened tubes, International Journal of Refrigeration (2003) 442-451.
23. D.A. Yashar, T.A. Newell, J.C. Chato, Experimental investigation of void fraction during horizontal flow in smaller diameter refrigeration applications, ACRC TR-141, Air Conditioning and Refrigeration Center, University of Illinois, Urbana-Champaign, IL 1998.
24. D.M. Graham, D.A. Yashar, M.J. Wilson, H.R. Kopke, J.C. Chato, T.A. Newell, An investigation of refrigerant void fraction in horizontal, micro fin tubes, HVAC&Res. 7 (2001) 67-82.
25. A. Premoli, D. Francesco, A. Prima, An empirical correlation for evaluating two-phase mixture density under adiabatic conditions, European Two-Phase Flow Group Meeting, Milan, Italy, 1970.
26. A. Kawahara, M. Kawaji, P.M.Y. Chung., M. Sadatomi, K. Okayama, Effects of Channel Diameter and Liquid Properties on Void Fraction in Adiabatic Two-Phase Flow through Microchannels, Heat Transfer Engineering 26 (2005) 13-19.
27. L.K.H. Leung, Two phase flow, Thermal hydraulics branch, Chalk River Laboratories, AECL, UNENE Thermal hydraulics course, 2005.
28. T.N. Tandon, H.K. Varma, C.P. Gupta, A void fraction model for annular two-phase flow, International Journal of Heat and Mass Transfer 28 (1985) 191-98.
29. D. Graham, J.C. Chato, T.A. Newell, Heat transfer and pressure drop during condensation of refrigerant 134a in an axial ly grooved tube, International Journal of Heat and Mass Transfer (1999) 1935-1944.
30. E.T. Hurlburt, T.A. Newell, Characteristics of refrigerant film thickness, pressure drop, and condensation heat transfer in annular flow, HVAC&Research 5 (1999) 229-248.
31. G.A. Hughmark, Holdup in gas-liquid flow, Chemical Engineering Progress 58 (1962) 62-65.
32. A.W. Melkamu, G.J. Afshin, Comparison of void fraction correlations for different flow patterns in horizontal and upward inclined pipes, International Journal of Multiphase Flow 33 (2007) 347-370.
33. A.A. Armand, G.G. Treschev, The resistance during the movement of a two-phase system in horizontal pipes, Izv Vse Tepllnst. 1(1946)16-23.
34. S.G Bankoff, A Variable density single-fluid model for two-phase flow with particular reference to steam-water flow, Transactions ASME Journal of Heat Transfer 82 (1960) 265-72.
35. V. Czop, D. Barbier, S. Dong, Pressure drop, void fraction and shear stress measurements in adiabatic two-phase flow in coiled tube, Nuclear Engineering Design 149 (1994) 323-333.
36. S.Z. Rouhani, E. Axelsson, Calculation of void volume fraction in the sub cooled and quality boiling regions, International Journal of Heat and Mass Transfer 13 (1970) 383-393.
37. R.H. Huq, J.L. Loth, Analytical two-phase flow void fraction prediction method. Journal of Thermo Physics 6 (1992) 139-144.
38. A.A. Armand, The resistance during the movement of a two-phase system in horizontal pipes, Izv. Vses. Teplotekh, Inst. l,pp. 16-23, AERA-Lib/Trans 828 1946.
39. D. Chisholm, A.D.K. Laird, Two phase flow in rough tubes, Transactions of ASME 80 (1958) 276-286.
40. D. Steiner, Heat transfer to boiling saturated liquids, VDI- Warmeatlas (VDI Heat Atlas), Editor: Verein Deutscher Ingenieure, VDI-Gessellschaft Verfahrenstechnik und Chemie-ingenieurwesen (GCV), Translator: J.W. Fullarton, Dusseldorf, 1993.
41. T. Harms, D. Eckart, A. Groll, J. Braun, A void fraction model for annular flow in horizontal tubes, International Journal of Heat and Mass Transfer 46 (2003) 4051-4057.
42. W. Nusselt, Zeitschrift des Vereines Deutscher Ingenieure, 1916.
43. W.M. Rohsenov, J.H. Weber, A.T. Ling, Effect of vapor velocity on laminar and turbulent film condensation, Transactions of ASME 78 (1956) 1637-1643.
44. A.E. Dukler, Fluid mechanics and heat transfer in vertical falling film system, Chem. Engng. Prog. Symp. Series 56 (1960) 1-10.
45. V.G Levich, Physicochemical Hydrodynamics, Chap. XII, Prentice-Hall Inc., Englewood Cliffs, New Jersey 1962.
46. F. Blangetti,R. Krebs,E.U. Schlunder, Condensation in vertical tubes-experimental results and modeling, Chemical Engineering Fundamentals 1 (1982)20-63.
47. W.W. Akers, A. Deans, O.K. Crosser, Condensing heat transfer within horizontal tubes, Chemical Engineering Progress Symposium Series 55 (1959) 171-176.
48. K. Moser, R.L. Webb, B. Na., A new equivalent reynolds number model for condensation in smooth tubes, International Journal of Heat Transfer 120 (1998) 410-417.
49. X. Ma, A. Briggs, J.W. Rose, Heat transfer and pressure drop characteristics for condensation of Rl 13 in a vertical micro-finned tube with wire insert, International Communications in Heat and Mass Transfer 31 (2004) 619-627.
50. S. Koyoma, A. Miyara, H. Takamatsu, T. Fujii, Condensation heat transfer of binary refrigerant mixtures of R22 and Rl 14 inside a horizontal tube with internal spiral grooves, International Journal of Refrigeration 13 (1990) 256-263.
51. O.P. Bergelin, P.K. Kegel, F.G. Carpenter, C. Gazley, Co-current gas-liquid flow: II. Flow in vertical tubes, Meeting at Berkeley, Cal. (USA) June, ASME, Heat Transfer and Fluid Mechanic Institute 19-28 1946.
52. V.P. Carey, Liquid-vapor phase change phenomena, Hemisphere Publishing, 1992.
53. N.K. Maheshwari, R.K. Sinha, D. Saha, M. Aritomi, Investigation on condensation in presence of a noncondensible gas for a wide range of Reynolds number, Nuclear Engineering and Design 227 (2004) 219-238.
54. S. T. Oh, A. Revankar, Analysis of the complete condensation in a vertical tube passive condenser, International Communications in Heat and Mass Transfer (2005) 716-727. [55] R.B. Bird, W.E. Steward, E.N. Lightfoot, Transport Phenomena, chap.21, pp.642-666, Wiley and Sons, Inc., New York, 1960.