Hydrophilic poly(ethylene oxide)-aramide segmented block copolymers

European Polymer Journal

Volumn 45, Issue 10, 2009, Pages 2858-2866

  Arun, A ^a,b   Gaymans, R J ^a  

^a UNIVERSITY OF TWENTE   (Netherlands)

^b DUTCH POLYMER INSTITUTE DPI   (Netherlands)

Author keywords

Aramide; Monodisperse; Poly(ethylene oxide); Poly(propylene oxide); Segmented block copolymer

Indexed keywords

AFM; ARAMIDE; ARAMIDES; CONCENTRATION OF; CRYSTALLINE PHASE; CRYSTALLINITIES; FTIR; HYDROPHILIC COPOLYMERS; LOW TEMPERATURES; MELTING TEMPERATURES; MONODISPERSE; SEGMENTED BLOCK COPOLYMER; SEGMENTED BLOCK COPOLYMERS;

BLOCK COPOLYMERS; COPOLYMERIZATION; ENZYMES; ETHYLENE; FOURIER TRANSFORM INFRARED SPECTROSCOPY; HYDROPHILICITY; INSECTICIDES; MELTING POINT; PLASTIC PRODUCTS; POLYETHYLENE GLYCOLS; POLYETHYLENE OXIDES;

PROPYLENE;

EID: 70249112661     PISSN: 00143057     EISSN: None     Source Type: Journal    
DOI: 10.1016/j.eurpolymj.2009.07.002     Document Type: Article

References (38)

1. Holden G., Legge N.R., Quirk P.R., and Schroeder H.E. Thermoplastic elastomers. 2nd ed. (1996), Hanser Publishers, Munich
2. Fakirov S. Handbook of condensation thermoplastic elastomers (2005), Wiley, New York
3. Schneider N.S., Illinger J.L., and Karasz F.E. Polymers of biological and biomedical significance. J App Polym Sci 48 (1993) 1723-1729
4. Lee D., Lee S., Kim S., Char K., Park J.H., and Bae Y.H. Micro-phase-separation behavior of amphiphilic polyurethanes involving poly(ethylene oxide) and poly(tetramethylene oxide). J Polym Sci B Polym Phys 41 (2003) 2365-2374
5. Chen C.T., Eaton R.F., Chang Y.J., and Tobolsky A.V. Synthesis, characterization, and permeation properties of polyether-based polyurethanes. J Appl Polym Sci 16 (1972) 2105-2114
6. Yilgör I., and Yilgör E. Hydrophilic polyurethaneurea membranes: influence of soft block composition on the water vapor permeation rates. Polymer 40 (1999) 5575-5581
7. Gebben B. A water vapor-permeable membrane from block copolymers of poly(butylene terephthalate) and polyethylene oxide. J Membr Sci 113 (1996) 323-329
8. Stroeks A., and Dijkstra K. Modelling the moisture vapour transmission rate through segmented block co-poly(ether-ester) based breathable films. Polymer 42 (2001) 117-127
9. Metz S.J., Mulder M.H.V., and Wessling M. Gas-permeation properties of poly(ethylene oxide) poly(butylene terephthalate) block copolymers. Macromolecules 37 (2004) 4590-4597
10. Bondar V.I., Freeman B.D., and Pinnau I. Gas sorption and characterization of poly(ether-b-amide) segmented block copolymers. J Polym Sci B Polym Phys 37 (1999) 2463-2475
11. Bondar V.I., Freeman B.D., and Pinnau I. Gas transport properties of poly(ether-b-amide) segmented block copolymers. J Polym Sci B Polym Phys 38 (2000) 2051-2062
12. Husken D., Feijen J., and Gaymans R.J. Hydrophilic segmented block copolymers based on poly(ethylene oxide) and monodisperse amide segments. J Polym Sci A Polym Chem Ed 45 (2007) 4522-4535
13. Husken D., and Gaymans R.J. The structure of water in PEO-based segmented block copolymers and its effect on transition temperatures. Macromol Chem Phys 209 (2008) 967-979
14. Deschamps A.A., Grijpma D.W., and Feijen J. Poly(ethylene oxide)/poly(butylene terephthalate) segmented block copolymers: the effect of copolymer composition on physical properties and degradation behavior. Polymer 42 (2001) 9335-9345
15. Husken D., Feijen J., and Gaymans R.J. Surface properties of poly(ethylene oxide)-based segmented block copolymers with monodisperse hard segments. J Appl Polym Sci 114 (2009) 1264-1269
16. Husken D., and Gaymans R.J. Water vapor transmission of poly(ethylene oxide)-based segmented block copolymers. J Appl Polym Sci 112 (2009) 2143-2150
17. 2 permeation properties of poly(ethylene oxide)-based segmented block copolymers. J Membr Sci, submitted for publication.
18. Rault J., and Le Huy H.M. Polyamide-polyether block copolymers swollen by water. I. Properties. J Macromol Sci Phys 35 (1996) 89-114
19. Husken D., and Gaymans R.J. The tensile properties of poly(ethylene oxide)-based segmented block copolymers in the dry and wet state. J Mater Sci 44 (2009) 2656-2664
20. Park J.H., and Bae Y.H. Hydrogels based on poly(ethylene oxide) and poly(tetramethylene oxide) or poly(dimethyl siloxane). II. Physical properties and bacterial adhesion. J Appl Polym Sci 89 (2003) 1505-1514
21. Park J.H., Cho Y.W., Kwon I.C., Jeong S.Y., and Bae Y.H. Assessment of PEO/PTMO multiblock copolymer/segmented polyurethane blends as coating materials for urinary catheters: in vitro bacterial adhesion and encrustation behavior. Biomaterials 23 (2002) 3991-4000
22. Shibaya M., Suzuki Y., Doro M., Ishihara H., Yoshihara N., and Enomoto M. Effect of soft segment component on moisture-permeable polyurethane films. J Polym Sci B Polym Phys 44 (2006) 573-583
23. Husken D., Feijen J., and Gaymans R.J. Synthesis and properties of segmented block copolymers based on mixtures of poly(ethylene oxide) and poly(tetramethylene oxide) segments. Eur Polym J 44 (2008) 130-143
24. Van der Schuur J.M., and Gaymans R.J. Segmented Block copolymers based on poly(propylene oxide) and mono disperse polyamide-6,T segments. J Polym Sci A Polym Chem Ed 44 (2006) 4769-4781
25. Harrell L.L. Segmented Polyurethans. Properties as a function of segment size and distribution. Macromolecules 2 (1969) 607-612
26. Miller J.A., Lin S.B., Hwang K.K.S., Wu K.S., Gibson P.E., and Cooper S.L. Properties of polyether-polyurethane block copolymers: effects of hard segment length distribution. Macromolecules 18 (1985) 32-44
27. Krijgsman J., and Gaymans R.J. Tensile and elastic properties of thermoplastic elastomers based on PTMO and tetra-amide units. Polymer 45 (2004) 437-446
28. Biemond G.J.E., Feijen J., and Gaymans R.J. Poly(ether amide) segmented block copolymers with adipic acid based tetraamide segments. J Appl Polym Sci 105 (2007) 951-963
29. Niesten M.C.E.J., Feijen J., and Gaymans R.J. Synthesis and Properties of segmented copolymers having aramid units of uniform length. Polymer 41 (2000) 8487-8500
30. Niesten M.C.E.J., Harkema S., Van Der Heide E., and Gaymans R.J. Structural changes of segmented copolyesteramides of uniform aramid units induced by melting and deformation. Polymer 42 (2001) 1131-1142
31. Arun A., and Gaymans R.J. Segmented block copolymers with monodisperse aramide end-segments. Macromol Chem Phys 209 (2008) 854-863
32. Arun A., Dullaert K., and Gaymans R.J. Structure and properties of mono-, di-, tri- and multi-block segmented copolymers with diamide hard segments. Macromol Chem Phys 210 (2009) 48-59
33. Garcia J.M., De La Campa J.G., and De Abajo J. Aliphatic-aromatic poly(ether amides)s containing oxyethelene units. Synthesis and characterization. J Polym Sci A 34 (1996) 659-667
34. Garcia J.M., Alvarez J.C., De La Campa J.G., and De Abajo J. Thermal behavior of aliphatic-aromatic poly(ether-amides)s. J App Polym Sci 67 (1997) 975-981
35. König H.M., Gorelik T., Kolb U., and Kilbinger A.F.M. Supramolecular PEG-co-oligo(p-benzamide)s prepared on a peptide synthesizer. J Am Chem Soc 129 (2007) 704-708
36. Schleuss T.W., Schollmeyer D., and Kilbinger A.F.M. A precursor route to supramolecular oligo(p-phenylene terephthalamide block copolymers. Macromol Rapid Commun 29 (2008) 293-298
37. Sauer B.B., McLean R.S., Gaymans R.J., and Niesten M.C.E.J. Crystalline morphologies in segmented copolymers with hard segments of uniform length. J Polym Sci B Polym Phys 42 (2004) 1783-1792
38. Gaymans R.J., and Harkema S. Melting behavior of aliphatic and aromatic diamides. J Polym Sci B Polym Phys 15 (1977) 587-590