Experimental deployment and validation of a distributed SHM system using wireless sensor networks

Structural Engineering and Mechanics

Volumn 32, Issue 6, 2009, Pages 787-809

  Castaneda, Nestor E ^a   Dyke, Shirley ^a   Lu, Chenyang ^a   Sun, Fei ^a   Hackmann, Greg ^a  

^a WASHINGTON UNIVERSITY IN ST LOUIS   (United States)

Author keywords

DLAC; Smart sensors; Structural health monitoring

Indexed keywords

DAMAGE DETECTION; DECISION MAKING; ELECTRIC POWER UTILIZATION; SMART SENSORS; STRUCTURAL HEALTH MONITORING;

COMMUNICATION BANDWIDTH; DAMAGE DETECTION SYSTEMS; DISTRIBUTED APPROACHES; DISTRIBUTED IMPLEMENTATION; DISTRIBUTED PROCESSING; DLAC; ON-BOARD PROCESSING; STRUCTURAL HEALTH MONITORING (SHM);

WIRELESS SENSOR NETWORKS;

EID: 69949134957     PISSN: 12254568     EISSN: None     Source Type: Journal    
DOI: 10.12989/sem.2009.32.6.787     Document Type: Article

References (44)

1. Adler, R., Flanigan, M., Huang, J., Kling, R., Kushalnagar, N., Nachman, L., Wan, C.Y. and Yarvis, M. (2005), "Intel mote 2: An advanced platform for demanding sensor network applications", Proc. 3th Int. Conference on Embedded Networked Sensor Systems, 298-1298
2. Bernal, D. (2002), "Load vectors for damage localization", J. Eng. Mech., 128(1), 7-14.
3. Chintalapudi, K., Paek, J., Gnawali, O., Fu, T., Dantu, K., Caffrey, J., Govindan, R. and Jonson, E. (2006), "Structural damage detection and localization using NetSHM", Proceedings of IPSN'06, April 19-21, Nashville, Tennessee.
4. Clayton, E.H. (2002), "Development of an experimental model for the study of infrastructure preservation", Proceedings of the National Conference on Undergraduate Research, Whitewater, Wisconsin.
5. Clayton, E.H., Koh, B.H., Xing, G., Fok, C.L., Dyke, S.J. and Lu, C. (2005), "Damage detection and correlation-based localization using wireless mote sensors", Proceedings of '05 The 13th Mediterranean Conference on Control and Automation, Limassol, Cyprus.
6. Clayton, E.H., Qian, Y., Orjih, O., Dyke, S.J., Mita, A. and Lu, C. (2006), "Of-the-shelf modal analysis: Structural health monitoring with motes", In Proceedings of the 24th International Modal Analysis Conference.
7. Clayton, E.H. (2006), Frequency Correlation-based Structural Health Monitoring with Smart Wireless Sensors, Master of Science Thesis, Washington University in St. Louis.
8. Contursi, T., Messina, A. and Williams, E.J. (1998), "A multiple-damage location assurance criterion based on natural frequency changes", J. Vib. Control, 4, 619-633. (Pubitemid 128563301)
9. Crosbow Technologies iMote2 Mote IPR2400 (2007), http://www.xbow.com/ Products/productdetails.aspx?sid=253.
10. Elson, J., Girod, L. and Estrin, D. (2002), "Fine-grained network time synchronization using reference broadcast", Proc., 5th Symposium on Operating Systems Design and Implementation, Bostos, MA.
11. Ferzli, N.A., Sandburg, C.J., King, T., Pei, J.S., Zaman, M.M., Refai, H.H., Ivey, R.A. and Harris, O. (2006), "Experimental investigation of 'smart dust' for pavement condition monitoring", Proceedings of the 24rd International Modal Analysis Conference (IMAC XXIV), St. Louis, MO, January 30 - February 2.
12. Ganeriwal, S., Kumar, R. and Srivastava, M.B. (2003), "Timing-sync protocol for sensor networks", Proc., 1st International Conference on Embedded Networked Sensor Systems, Los Angeles, CA, 138-149.
13. Gangone, M.V., Whelan, M.J., Janoyan, K.D., Cross, K. and Jha, R. (2007), "Performance monitoring of a bridge superstructure using a dense wireless sensor network", Proceedings of the 6th International Workshop on Structural Health Monitoring, Stanford, California.
14. Gao, Y. (2005), "Structural health monitoring strategies for smart sensor networks", Doctor of Philosophy Thesis, The University of Illinois at Urbana-Champaign.
15. Hackmann, G., Sun, F., Castaneda, N., Lu, C. and Dyke, S. (2008), "A holistic approach to decentralized structural damage localization using wireless sensor networks", Proceedings of the Real-time Systems Symposium, 2008.
16. Juang, J.N. and Pappa, R.S. (1985), "An eigensystem realization algorithm for modal parameter identification and model reduction", J. Guid. Control Dyn., 8, 620-627.
17. Kim, S. (2005), "Wireless sensor networks for structural health monitoring", Master's thesis, University of California at Berkeley.
18. Kim, S. (2007), "Wireless sensor networks for high fidelity sampling", Ph.D. Dissertation, University of California at Berkeley.
19. Kim, S., Pakzad, S., Culler, D., Demmel, J., Fenves, G., Glaser, S. and Turon, M. (2007), "Health monitoring of civil infrastructures using wireless sensor networks", In the Proceedings of the 6th International Conference on Information Processing in Sensor Networks (IPSN '07), Cambridge, MA, April 2007, ACM Press, 254-263. (Pubitemid 47582155)
20. Koh, B.H. and Dyke, S.J. (2007), "Structural damage detection in cable-stayed bridges using correlation and sensitivity of modal data", Comput. Struct., 85, 117-130.
21. Levy, E.C. (1959), "Complex-curve fitting", IEEE T. Automat. Contr., 4, 37-44.
22. Liu, S.C. and Tomizuka, M. (2003), "Vision and strategy for sensors and smart structures technology research", In Proceedings of the 4th International Workshop on Structural Health Monitoring, Standford, CA, September 15-17,42-52.
23. Lynch, J.P., Kiremidjian, A.S., Law, K.H., Kenny, T. and Carryer, E. (2002), "Issues in wireless structural damage monitoring technologies", The Proceedings of the Third World Conference on Structural Control, 2, 667-672.
24. Lynch, J.P., Sundararajan, A., Law, K.H., Kiremidjian, A.S. and Ed Carryer. (2004), "Embedding damage detection algorithms in a wireless sensing unit for operational power efficiency", Smart Mater. Struct., 13, 800-810.
25. Lynch, J.P. (2004), "Overview of wireless sensors for real time health monitoring of civil structures", In Proceedings of the 4th International Workshop on Structural Control, June 2004, 189-194.
26. Lynch, J.P., Wang, Y., Law, K.H., Yi, J.-H., Lee, C.G. and Yun, C.B. (2005), "Validation of a large-scale wireless structural monitoring system on the Geumdang bridge", Proc., the Int. Conference on Safety and Structural Reliability, Rome, Italy.
27. Lynch, J.P. and Loh, K. (2006), "A summary review of wireless sensors and sensor networks for structural health monitoring", Shock and Vibration Digest, in press.
28. Maroti, M., Kusy, B., Simon, G. and Ledeczi, A. (2004), "The flooding time syscronization protocol", Proc., 2nd International Conference On Embedded Networked Sensor Systems, Baltimore, MD, 39-49.
29. Mechitov, K.A., Kim, W., Agha, G.A. and Nagayama, T. (2004), "High-frequency distributed sensing for structure monitoring", Proc., 1st Int. Workshop on Networked Sensing Systems, Tokyo, Japan, 101-105.
30. Messina, A., Jones, I.A. and Williams, E.J. (1996), "Damage detection and localization using natural frequencies changes", Proceedings of Conference on Identification in Engineering Systems, Swansea, U.K., 67-76.
31. Messina, A., Williams, E.J. and Contursi, T. (1998), "Structural damage detection by a sensitivity and statistical-based method", J. Sound Vib., 216(5), 791-808.
32. Nagayama, T., Rice, J.A. and Spencer, B.F. Jr. (2006), "Efficacy of Intel's Imote2 wireless sensor platform for structural health monitoring applications", Proceedings of Asia-Pacific Workshop on Structural Health Monitoring, Yokohama, Japan.
33. Nagayama, T. (2007), "Structural health monitoring using smart sensors", Doctor of Philosophy Thesis, The University of Illinois at Urbana-Champaign.
34. Pakzad, S.N., Kim, S., Fenves, G.L., Glaser, S.D., Culler, D.E. and Demmel, J.W. (2005), "Multi-purpose wireless accelerometers for civil infrastructure monitoring", Proceedings of the 5th International Workshop on Structural Health Monitoring (IWSHM 2005), Stanford, CA.
35. Pei, J.S., Ivey, R.A., Lin, H., Landrum, A.R., Sandburg, C.J., Ferzli, N.A., King, T., Zaman, M.M. and Refai, H.H., "Development and validation of "smart dust" for pavement condition monitoring", Journal of Intelligent Material Systems and Structures, (submitted in December 2006, JIMSS-06-101).
36. Rice, J.A., Mechitov, K.A., Spencer, Jr., B.F. and Agha G.A. (2008), "A service-oriented architecture for structural health monitoring using smart sensors", Proceedings of the 14th World Conference on Earthquake Engineering, Beijing, China.
37. Sohn, H., Farrar, C.R., Hemez, F.M., Shunk, D.D., Stinemates, D.W. and Nadler, B.R. (2004), "A review of structural health monitoring literature from 1996-2001", Los Alamos National Laboratory report LA-13976-MS.
38. Spencer, Jr., B.F. (2003), "Opportunities and challenges for smart sensing technology", First International Conference on Structural Health Monitoring and Intelligent Infrastructure, Tokyo, 13-15 November 2003.
39. Spencer, Jr., B.F. and Nagayama, T. (2006), "Smart sensor technology: a new paradigm for structural health monitoring", Proc., Asia-Pacific Workshop on Structural health Monitoring, Yokohama, Japan.
40. STMicroelectronics. (2005), LIS3L02DQ data Sheet http://www.st.com/ stonline/products/literature/od/10175/lis3102dq.pdf
41. The Illinois SHM Services Toolkit (2008), http://shm.cs.uiuc.edu/ software.html
42. The Math Works (2007), http://www.mathworks.com/
43. TinyOS: http://www.tinyos.net/
44. Zimmerman, A., Shiraishi, M., Swartz, A. and Lynch, J.P. (2008), "Automated modal parameter estimation by parallel processing within wireless monitoring systems", J. Infrast. Syst., ASCE, 2008.