Reinforcement of dynamically vulcanized EPDM/PP elastomers using organoclay fillers: Dynamic properties of rubber vibration isolators and antivibration performance

Journal of Thermoplastic Composite Materials

Volumn 22, Issue 5, 2009, Pages 503-517

  Wu, Jyh Horng ^a   Li, Chia Hao ^a   Chiu, Hsien Tang ^b   Shong, Zhi Jian ^b   Tsai, Peir An ^c  

^a INDUSTRIAL TECHNOLOGY RESEARCH INSTITUTE   (Taiwan)

^b NATIONAL TAIWAN UNIVERSITY OF SCIENCE AND TECHNOLOGY   (Taiwan)

^c JEN TEH JUNIOR COLLEGE OF MEDICINE   (Taiwan)

Author keywords

Antivibration; EPDM; Organoclay; PP

Indexed keywords

AMBIENT TEMPERATURES; ANTIVIBRATION; ANTIVIBRATION PERFORMANCE; DYNAMIC MECHANISM; DYNAMIC PROPERTY; DYNAMICALLY VULCANIZED; EPDM; FILLED THERMOPLASTICS; HYSTERESIS BEHAVIOR; ORGANOCLAY CONTENT; PP; STANNOUS CHLORIDE; STORAGE MODULI; VIBRATION ISOLATORS; VULCANIZING AGENTS; X-RAY ANALYSIS;

ANTIVIBRATION MOUNTINGS; CHLORINE COMPOUNDS; DYNAMIC ANALYSIS; DYNAMICS; ELASTOMERS; HYSTERESIS; MECHANICAL PROPERTIES; ORGANOCLAY; PUMPING PLANTS; REINFORCED PLASTICS; REINFORCEMENT; RESINS; RUBBER; TANNING;

DYNAMIC MECHANICAL ANALYSIS;

EID: 69649089654     PISSN: 08927057     EISSN: 15307980     Source Type: Journal    
DOI: 10.1177/0892705709105966     Document Type: Article

References (36)

1. Subramanian, P.M. (1985). Permeability Barriers by Controlled Morphology of Polymer Blends, Polym. Eng. Sci., 25 (8). 483-487.
2. Subramanian, P.M. and Mehra, V. (1987). Laminar Morphology in Polymer Blends: Structure and Properties, Polym. Eng. Sci., 27 (9). 663-668.
3. Gupta, A.K. and Purwar, S.N. (1984). Crystallization of PP in PP/SEBS Blends and Its Correlation with Tensile Properties, J. Appl. Polym. Sci., 29 (5). 1595-1609.
4. Kienzle, S.Y. (1987). Alloys and Blends: Tying Properties to Markets, Plast. Eng., 43 (2). 41-43.
5. Utracki, L.A. (1982). Economics of Polymer Blends, Polym. Eng. Sci., 22 (17). 1166-1175.
6. Hur, T., Manson, J.A. and Sperling, L.H. (1989). Interplay of Rubber Network Theory with the Damping Behavior of Crosslinked Polyurethanes, J. Polym. Sci. B: Polym. Phys., 27 (11). 2251-2268.
7. Shag'aban, A.K., McCartney, S., Patel, N., Yilqor, I., Riffle, J.S., Dwight, D.W. and McGrath, J.E. (1983). ESCA Studies on Polydimethylsiloxane- urethane Copolymers and their Blends with Segmented Polyether, Polym. Prep., 24 (2). 130-133.
8. Manson, J.A. and Sperling, L.H. (1976). Polymer Blends and Composites, Plenum Press, New York.
9. Weibo, H. and Fengchang, Z. (1993). Studies on the Dynamic Mechanical and Vibration Damping Properties of Polyether Urethane and Epoxy Composites, J. Appl. Polym. Sci., 50 (2). 277-283.
10. Mathew, A., Chakraborty, B.C. and Deb, P.C. (1994). Studies on Interpenetrating Polymer Networks Based on Nitrile Rubber-poly(Vinyl Chloride) Blends and Poly(alkyl methacrylates), J. Appl. Polym. Sci., 53 (8). 1107-1114.
11. Tung, C.J. and Hsu, T.C. (1992). Vibration Damping with Urethane/Acrylate Simultaneous Semi-interpentrating Polymer Networks, J. Appl. Polym. Sci., 46 (10). 1759-1773.
12. Chen, Q., Ge, H., Chen, D., He, X. and Yu, X. (1994). Investigation on Damping Behavior and Morphology of Polyurethane/Polymethacrylates Interpenetrating Polymer Networks, J. Appl. Polym. Sci., 54 (9). 1191-1197.
13. Chang, M.C.O., Thomas, D.A. and Sperling, L.H. (1987). Characterization of the Area Under Loss Modulus and Tan Delta-temperature Curves: Acrylidc Polymers and Their Sequential Interpenetrating Polymer Networks, J. Appl. Polym. Sci., 34 (1). 409-422.
14. Foster, J.N. and Sperling, L.H. (1987). Application of Bulk Polymerized Acrylic and Methacrylic Interpenetrating Polymer Networks to Noise and Vibration Damping, J. Appl. Polym. Sci., 33 (7). 2637-2645.
15. Oborn, J., Bertilsson, H. and Rigdahl, M. (2001). Styrene-ethylene/ Butylenes-styrene Blends for Improved Constrained-layer Damping, J. Appl. Polym. Sci., 80 (14). 2865-2876.
16. Yamada, N., Shoji, S., Sasakl, H., Nagatani, A., Yamaguchi, K., Kohjiya, S. and Hashim Azanam, S. (1999). Developments of High Performance Vibration Absorber from Poly(vinyl chloride)/Chlorinated Polyethylene/Epoxidized Natural Rubber Blend, J. Appl. Polym. Sci., 71 (6). 855-863.
17. Ugar, E.E. and Beranek, L.L. (1971). Noise and Vibration Control, McGraw-Hill, New York.
18. Law, H.H., Rossiter, P.L., Koss, L.L. and Simon, G.P. (1995). Mechanisms in Damping of Mechanical Vibration by Piezoelectric Ceramic-polymer Composite Materials, J. Mater. Sci., 30 (10). 2648-2655.
19. Kwak, G.H., Inoue, K., Tominaga, Y., Asal, S. and Sumita, M. (2001). Characterization of the Vibrational Damping Loss Factor and Viscoelastic Properties of Ethylene-propylene Rubbers Reinforced with Micro-scale Fillers, J. Appl. Polym. Sci., 82 (12). 3058-3066.
20. Wong Dennis, T.H. and Williams, H.L. (1983). Dynamic Mechanical and Vibration Damping Properties of Polyurethane Compositions, J. Appl. Polym. Sci., 28 (7). 2187-2207.
21. Chiu, H.T., Wu, J.H. and Shong, Z.J. (2005). Dynamic Properties of Rubber Vibration Isolators and Antivibration Performance of Nanoclay-modified PE/PEL Blends System, Polym. Eng. Sci., 45 (4). 539-548.
22. Chiu, H.T., Wu, J.H. and Shong, Z.J. (2006). Dynamic Properties of Rubber Vibration Isolators and Antivibration Performance of Nanoclay-modified Silicone/Poly(propylene oxide)-poly(ethylene oxide) Copolymer with 29 wt% LiClO4 Blend System) Blends System, J. Appl. Polym. Sci., 101 (6). 3713-3720.
23. Yarlagadda, S. and Lesieutre, G. (1995). Fiber Contribution to Modal Damping of Polymer Matrix Composite Panels, J. Spaceraft Rockets, 32 (5). 825-831.
24. Adams, R.D. and Maheri, M.R. (2003). Damping in Advanced Polymer-matrix Composites, J. Alloys Compounds, 355 (1-2). 126-130.
25. Saravanos, D.A. and Chamis, C.C. (1990). Unified Micromechanics of Damping for Unidirectional and Off-axis Fiber Composites, J. Compos. Tech. Res., 12 (1). 31-40.
26. Gu, W., Kampe, S.L., Lu, G.Q. and Wu, H.F. (1998). Correlation of Fiber Pull-out Strength and Interfacial Vibration Damping Techniques by Micromechanical Analysis, J. Mater. Sci., 33 (24). 5731-5737.
27. Chiu, H.T., Chiu, S.H., Wu, J.H. and Ger, G.S. (2001). The Dynamic Properties of Rubber Vibration Isolators and Anti-vibration Performance of Kevlar Fiber Reinforced Silicone Rubber/Polyurethane/Epoxy Blends, J. Mater. Sci. Eng., 33 (4). 200-208.
28. Naderi, G., Nouri, M.R., Mehrabzadeh, M. and Bakhshandeh, G.R. (1999). Studies on Dynamic Vulcanization of PP/NBR Thermoplastic Elastomer Blends, Iran. Polym. J., 8 (1). 37-42.
29. Bhowmick, A.K. and Inoue, T. (1993). Reactive Processing of Rubber-plastic Blends: Role of Chemical Compatibilizer, J. Appl. Polym. Sci., 49 (11). 1893-1900.
30. Ghoreishy, M.H.R., Razavi-Nouri, M. and Naderi, G. (2000). Finite Element Analysis of Flow of Thermoplastic Elastomer Melt Through Axisymmetric Die with Slip Boundary Condition, Plast. Rubber Compos., 29 (5). 224-228.
31. Tsai, Y., Tsai, P.Y., Wu, Y.T., Leu, M.T. and Wu, J.H. (2009). Effect of Complex Curatives on the Properties for Ethylene Propylene Diene Rubber/Polypropylene Blends, J. Elastomer Plast., 41 (3). 209-221.
32. Rao, S.S. (1990). Mechanical Vibrations, Addison-Wesley, New York.
33. Sris 3503 (1990). Testing Methods for Dynamic Properties of Rubber Vibration Isolators for Automobile, J. Soc. Rubber Indus., 63 (4). 233-235.
34. Srivastava, S.K., Pramanik, M., Samantaray, B.K. and Bhowmick, A.K. (2002). Synthesis and Characterization of Organosoluble Thermoplastic Elastomer/Clay Nanocomposites, J. Polym. Sci. Part B: Polym. Phys., 40 (18). 2065-2072.
35. Sperling, L.H. (1992). Introduction to Physical Polymer Science, 2 nd edn, Wiley, New York.
36. Thakkar, H. and Goettler, L.A. (2003). The Effects of DV on the Morphology and Rheology of TPVs and Their Nanocomposites, Rubber World, 229 (1). 44-52.