Energy efficiency improvement of dryer section heat recovery systems in paper machines - A case study

Applied Thermal Engineering

Volumn 29, Issue 17-18, 2009, Pages 3663-3668

  Sivill, Leena ^a   Ahtila, Pekka ^a  

^a AALTO UNIVERSITY   (Finland)

Author keywords

Energy efficiency; Heat exchanger network; Heat recovery; Paper machine

Indexed keywords

DIFFERENT PROCESS; DRYER SECTION; ENERGY EFFICIENCY IMPROVEMENTS; EXHAUST AIR; FOLLOW-UP STUDIES; FUEL USE; HEAT EXCHANGER NETWORK; HEAT RECOVERY; HEAT RECOVERY SYSTEMS; IN-PROCESS; ORIGINAL DESIGN; PAPER MACHINE; PROCESS CHANGE; PROCESSING TIME; RETROFIT DESIGN; SIMULATION MODEL; STRUCTURAL IMPROVEMENTS; THERMODYNAMIC SIMULATIONS;

COMPUTER SYSTEM RECOVERY; DRYERS (EQUIPMENT); HEAT EXCHANGERS; INVESTMENTS; PAPER PRODUCTS; PAPERMAKING; PAPERMAKING MACHINERY; RECOVERY; RESEARCH; RETROFITTING; SIMULATORS; WASTE HEAT;

ENERGY EFFICIENCY;

COMPUTERS; DRIERS; EFFICIENCY; ENERGY; HEAT EXCHANGERS; HEAT RECOVERY; INVESTMENT; NETWORKS; PAPER MACHINES; PAPER MAKING; PAPER PRODUCTS; RECOVERY; RESEARCH;

EID: 69449103022     PISSN: 13594311     EISSN: None     Source Type: Journal    
DOI: 10.1016/j.applthermaleng.2009.06.022     Document Type: Article

References (35)

1. Pettersson F., and Söderman J. Design of robust heat recovery systems in paper machines. Chemical Engineering and Processing: Process Intensification 46 10 (2007) 910-917
2. L. Kilponen, Improvement of heat recovery in existing paper machines, LicSc Thesis, Department of Mechanical Engineering, Helsinki University of Technology, Espoo, 2002.
3. Sivill L., Ahtila P., and Taimisto M. Thermodynamic simulation of dryer section heat recovery in paper machines. Applied Thermal Engineering 25 8-9 (2005) 1273-1292
4. Sundqvist H. Dryer section ventilation and heat recovery. In: Karlsson M. (Ed). Papermaking, Part 2, Drying (2000), Papermaking Science and Technology, Fapet, Helsinki
5. Jones D.A., Yilmaz A.N., and Tilton B.E. Synthesis techniques for retrofitting heat recovery systems. Chemical Engineering Progress 82 (1986) 28-33
6. Tjoe T.N., and Linnhoff B. Using pinch technology for process retrofit. Chemical Engineering 93 8 (1986) 47-60
7. Carlsson A., Franck P.-A., and Berntsson T. Design better heat exchanger network retrofits. Chemical Engineering Progress 89 3 (1993) 87-96
8. Asante N.D.K., and Zhu X.X. An automated approach for heat exchanger network retrofit featuring minimal topology modifications. Computers and Chemical Engineering 20 Suppl. 1 (1996) S7-S12
9. van Reisen J.L.B., Polley G.T., and Verheijen P.J.T. Structural targeting for heat integration retrofit. Applied Thermal Engineering 18 5 (1998) 283-294
10. Zhu X.X., and Asante N.D.K. Diagnosis and optimization approach for heat exchanger network retrofit. AIChE Journal 45 7 (1999) 1488-1503
11. Nie X.R., and Zhu X.X. Heat exchanger network retrofit considering pressure drop and heat-transfer enhancement. AIChE Journal 45 6 (1999) 1239-1254
12. Varbanov P.S., and Klemeš J. Rules for paths construction for HENs debottlenecking. Applied Thermal Engineering 20 (2000) 1409-1420
13. Yee T.F., and Grossmann I.E. A screening and optimisation approach for the retrofit of heat-exchanger networks. Industrial and Engineering Chemistry Research 30 1 (1991) 146-162
14. Ciric A.R., and Floudas C.A. A retrofit approach for heat exchanger networks. Computers and Chemical Engineering 13 6 (1989) 703-715
15. Ciric A.R., and Floudas C.A. A mixed integer nonlinear programming model for retrofitting heat-exchanger networks. Industrial and Engineering Chemistry Research 29 2 (1990) 239-251
16. Soršak A., and Kravanja Z. Simultaneous MILNP synthesis of heat exchanger networks comprising different exchanger types. Computers and Chemical Engineering 26 (2002) 599-615
17. Soršak A., and Kravanja Z. MILNP retrofit of heat exchanger networks comprising different exchanger types. Computers and Chemical Engineering 28 (2004) 235-251
18. Briones V., and Kokossis A. A new approach for the optimal retrofit of heat exchanger networks. Computers and Chemical Engineering 20 Suppl. 1 (1996) S43-S48 (European Symposium on Computer Aided Process Engineering-6)
19. Kovač Kralj A., and Glavič P. Retrofit of complex and energy intensive processes - I. Computers and Chemical Engineering 19 12 (1995) 1255-1270
20. Kovač Kralj A., Glavič P., and Kravanja Z. Retrofit of complex and energy intensive processes II: stepwise simultaneous superstructural approach. Computers and Chemical Engineering 24 (2000) 125-138
21. Kovač Kralj A., and Glavič P. Simultaneous retrofit of complex and energy intensive processes - III. Computers and Chemical Engineering 24 (2000) 1229-1235
22. Kovač Kralj A., Glavič P., and Kravanja Z. Heat integration between processes: integrated structure and MINLP model. Computers and Chemical Engineering 29 (2005) 1699-1711
23. Bengtsson C., Karlsson M., Berntsson T., and Söderström M. Co-ordination of pinch technology and the MIND method - applied to a Swedish board mill. Applied Thermal Engineering 22 (2002) 133-144
24. Staine F., and Favrat D. Energy integration of industrial processes based on the pinch analysis method extended to include exergy factors. Applied Thermal Engineering 16 6 (1996) 497-507
25. Brown D., Maréchal F., and Paris J. A dual representation for targeting process retrofit, application to a pulp and paper process. Applied Thermal Engineering 25 (2005) 1067-1082
26. Feng X., and Zhu X.X. Combining pinch and exergy analysis for process modifications. Applied Thermal Engineering 17 3 (1997) 249-261
27. Anantharaman R., Abbas O.S., and Gundersen T. Energy level composite curves - a new graphical methodology for the integration of energy intensive processes. Applied Thermal Engineering 26 (2006) 1378-1384
28. Bengtsson C., Nordman R., and Berntsson T. Utilization of excess heat in the pulp and paper industry - a case study of technical and economic opportunities. Applied Thermal Engineering 22 9 (2002) 1069-1081
29. Nordman R., and Berntsson T. Use of advanced composite curves for assessing cost-effective HEN retrofit I: theory and concepts. Applied Thermal Engineering 29 (2009) 275-281
30. Nordman R., and Berntsson T. Use of advanced composite curves for assessing cost-effective HEN retrofit II: case studies. Applied Thermal Engineering 29 2-3 (2009) 282-289
31. Soininen M. Dimensioning of paper machine heat recovery recuperators. Drying Technology 13 4 (1995) 867-896
32. J. Söderman, P. Heikkilä, Calculation of the heat transfer coefficients with condensation in heat recovery systems, Report 2001-1, Åbo Akademi University, Heat Engineering Laboratory, Åbo, 2001.
33. J. Söderman, F. Pettersson, Comparison of solutions with varying cost factors in structural optimisation of paper machine heat recovery systems, Report 2001-3, Åbo Akademi University, Åbo, 2001.
34. Söderman J., Westerlund T., and Pettersson F. Economical optimisation of heat recovery systems for paper machine dryer sections. In: Friedler F., and Klemeš J. (Eds). Proceedings of the 2nd Conference on Process Integration, Modelling and Optimisation for Energy Saving and Pollution Reduction, PRES'99 (1999), Hungarian Chemical Society, Budapest 607-612
35. Söderman J., and Pettersson F. Influence of variations in cost factors in structural optimisation of heat recovery systems with moist air streams. Applied Thermal Engineering 23 14 (2003) 1807-1818