Room-temperature tensile and high-cycle-fatigue strength of fine TiB particulate-reinforced Ti-22Al-27Nb composites

Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science

Volumn 35 A, Issue 9, 2004, Pages 2971-2979

  Emura, Satoshi ^a   Yang, Seung Jin ^b   Hagiwara, Masuo ^a  

^a NATIONAL INSTITUTE FOR MATERIALS SCIENCE   (Japan)

^b Korea Advanced Institute of Science and Technology (KAIST)   (South Korea)

Author keywords

[No Author keywords available]

Indexed keywords

CERAMIC MATRIX COMPOSITES; DISLOCATIONS (CRYSTALS); FATIGUE OF MATERIALS; INGOTS; RAPID SOLIDIFICATION; SCANNING ELECTRON MICROSCOPY; STRENGTH OF MATERIALS; TENSILE STRENGTH; TITANIUM ALLOYS;

HIGH CYCLE FATIGUE STRENGTH; INGOT METALLURGY; ROOM TEMPERATURE TENSILE;

TITANIUM POWDER METALLURGY;

EID: 6944241356     PISSN: 10735623     EISSN: None     Source Type: Journal    
DOI: 10.1007/s11661-004-0244-z     Document Type: Article

References (33)

1. D. Banerjee, A.K. Gogia, T.K. Nandy, and V.A. Joshi: Acta Metall., 1988, vol. 36, pp. 871-82.
2. K. Muraleedharan, T.K. Nandy, D. Banerjee, and S. Lele: Intermetallics, 1995, vol. 3, pp. 187-99.
3. R.G. Rowe: in Microstructure/Property Relationships in Titanium Aluminides and Alloys, Y.-W. Kim and R.R. Boyer, eds., TMS, Warrendale, PA, 1991, pp. 387-98.
4. CJ. Boehlert, B.S. Majumdar, V. Seetharaman, and D.B. Miracle: Metall. Mater. Trans. A, 1999, vol. 30A, pp. 2305-23.
5. J. Kumpfert and C. Leyens: in Structural Intermetallics 1997, M.V. Nathal, R. Darolia, C.T. Liu, P.L. Martin, D.B. Miracle, R. Wagner, and M. Yamaguchi, eds., TMS, Warrendale, PA, 1997, pp. 895-904.
6. J. Kumpfert and W.A. Kaysser: Z. Metallkd., 2001, vol. 9:2, pp. 128-33.
7. R.G. Rowe, D.G. Konitzer, A.P. Woodfield, and J.C. Chesnutt: in High Temperature Aluminides & Intermetallics IV, L.A. Johnson, D.P. Pope, and J.O. Stiegler, eds., MRS, Pittsburgh, PA, 1991, pp. 703-08.
8. CJ. Boehlert, B.S. Majumdar, V. Seetharaman, D.B. Miracle, and R. Wheeler: in Structural Intermetallics 1997, M.V. Nathal, R. Darolia, C.T. Liu, P.L. Martin, D.B. Miracle, R. Wagner, and M. Yamaguchi, eds., TMS, Warrendale, PA, 1997, pp. 795-804.
9. S. Emura and M. Hagiwara: in Titanium '99 Science and Technology, I.V. Gorynin and S.S. Ushkov, eds., CRISM "Prometey," St. Petersburg, 2000, pp. 298-305.
10. T. Saito, T. Furuta, and T. Yamaguchi: in Metallurgy and Technology of Practical Titanium Alloys, S. Fujishiro, D. Eylon, and T. Kishi, eds., TMS, Warrendale, PA, 1994, pp. 351-62.
11. Z. Fan, A.P. Miodownik, L. Chandrasekaran, and M. Ward-Close: J. Mater. Sci., 1994, vol. 29, pp. 1127-34.
12. T. Saito, H. Takamiya, and T. Furuta: Mater. Sci. Eng. A, 1998, vol. A243, pp. 273-78.
13. E. Zhang, Y. Jin, H. Wang, and S. Zeng: J. Mater. Sci., 2002, vol. 37, pp. 1861-67.
14. M. Hagiwara, N. Arimoto, S. Emura, Y. Kawabe, and H.G. Suzuki: Iron Steel Inst. Jpn. Int., 1992, vol. 32, pp. 909-16.
15. M. Hagiwara, S. Emura, Y. Kawabe, and S.J. Kim: in Light Weight Alloys for Aerospace Applications IV, E.W. Lee, W.E. Frazier, N.J. Kim, and K. Jata, eds., TMS, Warrendale, PA, 1997, pp. 219-26.
16. S. Emura, M. Hagiwara, and Y. Kawabe: in Titanium '95, P.A. Blenkinsop, W.J. Evans, and H.M. Flower, eds., The Institute of Materials, London, 1995, pp. 2795-802.
17. F. Tang, S. Emura, and M. Hagiwara: Scripta Mater., 2000, vol. 43, pp. 573-78.
18. W. Voight: Wied. Ann., 1889, vol. 38, pp. 573-87.
19. M.R. Piggot: Load-Bearing Fibre Composites, Pergamon Press, Oxford, United Kingdom, 1980.
20. S. Emura and M. Hagiwara: Int. J. Mater. Product Technol., 2001, vol. 16, pp. 103-08.
21. J.R. Hague, J.F. Lynch, A. Rudnick, F.C. Holden, and W.H. Duckworth: Refractory Ceramics for Aerospace - Materials Selection Handbook, American Ceramic Society, Columbus, OH, 1964, p. 53.
22. S. Ranganath: J. Mater. Sci., 1997, vol. 32, pp. 1-16.
23. D.J. Lloyd: Int. Mater. Rev., 1994, vol. 39, pp. 1-23.
24. M. Taya and R.J. Arsenault: Metal Matrix Composites, 1st ed., Pergamon Press, Oxford, United Kingdom, 1989, p. 51.
25. T. Saito, T. Furuta, and T. Yamaguchi: in Recent Advances in Titanium Metal Matrix Composites, F.H. Froes and J. Storer, eds., TMS, Warrendale, PA, 1995, pp. 33-44.
26. V.C. Nardone and K.M. Prewo: Scripta Metall., 1986, vol. 20, pp. 4348.
27. P.M. Kelly: Int. Metall. Rev., 1973, vol. 18, p. 31.
28. F. Chu, T.E. Mitchell, B. Majumdar, D. Miracle, T.K. Nandy, and D. Banerjee: Intermetallics, 1997, vol. 5, pp. 147-56.
29. T.K. Nandy and D. Banerjee: in Structural Intermetallics 1997, M.V. Nathal, R. Darolia, C.T. Liu, P.L. Martin, D.B. Miracle, R. Wagner, and M. Yamaguchi, eds., TMS, Warrendale, PA, 1997, pp. 777-86.
30. S. Emura, A. Araoka, and M. Hagiwara: Scripta Mater., 2003, vol. 48, pp. 629-34.
31. D. Eylon and J.A. Hall: Metall. Trans. A, 1977, 8A, pp. 981-90.
32. S. Emura and M. Hagiwara: 10th Iketani Conf. on Materials Research Toward 21st Century, Karuizawa, 2000.
33. M. Taya and R.J. Arsenault: Metal Matrix Composites, 1st ed., Pergamon Press, Oxford, United Kingdom, 1989, p. 42.