MPC of switching in a boost converter using a hybrid state model with a sliding mode observer

IEEE Transactions on Industrial Electronics

Volumn 56, Issue 9, 2009, Pages 3453-3466

  Oettmeier, Friedrich Martin ^a   Neely, Jason ^b   Pekarek, Steve ^b   DeCarlo, Raymond ^b   Uthaichana, Kasemsak ^c  

^a RUHR UNIVERSITY BOCHUM   (Germany)

^b PURDUE UNIVERSITY   (United States)

^c CHIANG MAI UNIVERSITY   (Thailand)

Author keywords

Boost converter; Hybrid optimal control theory (HOCT); Sliding mode observer; Switched system

Indexed keywords

AVERAGE-VALUE MODEL; BOOST CONVERTER; CONTROL SWITCHING; CURRENT MODE CONTROL; HARDWARE EXPERIMENT; HYBRID OPTIMAL CONTROL; HYBRID OPTIMAL CONTROL THEORY (HOCT); HYBRID STATE MODELS; LOAD RESISTANCES; NON-IDEALITIES; OPTIMAL SWITCHING CONTROL; PERFORMANCE INDICES; SLIDING MODE OBSERVER; SLIDING MODE OBSERVERS; SOURCE VOLTAGE; STATE MODELS; STRUCTURE SYSTEMS; SWITCHED SYSTEM; SWITCHING CONTROL; TIME-DOMAIN SIMULATIONS;

CONTROL THEORY; ELECTRIC CONVERTERS; ELECTRIC POTENTIAL; OPTIMIZATION; SLIDING MODE CONTROL; SWITCHING; SWITCHING FUNCTIONS; SWITCHING SYSTEMS; SYSTEM THEORY;

OPTIMAL CONTROL SYSTEMS;

EID: 69349102908     PISSN: 02780046     EISSN: None     Source Type: Journal    
DOI: 10.1109/TIE.2008.2006951     Document Type: Article

References (37)

1. A. J. Forsyth and S. V. Mollov, "Modelling and control of DC-DC converters," Power Eng. J., vol. 12, no. 5, pp. 229-236, Oct. 1998.
2. J. Alvarez-Ramirez, I. Cervantes, G. Espinosa-Perez, P. Maya, and A. Morales, "Stable design of PI control for DC-DC converters with an RHS zero," IEEE Trans. Circuits Syst. I, Fundam. Theory Appl., vol. 48, no. 1, pp. 103-106, Jan. 2001.
3. P. T. Krein, Elements of Power Electronics. London, U.K.: Oxford Univ. Press, 1998.
4. M. K. Kazimierczuk and A. Massarini, "Feedforward control of dc-dc PWM boost converter," IEEE Trans. Circuits Syst. I, Fundam. Theory Appl. vol. 44, no. 2, pp. 143-148, Feb. 1997.
5. F. Garofalo, P. Marino, S. Scala, and F. Vasca, "Control of DC-DC converters with linear optimal feedback and nonlinear feedforward," IEEE Trans. Power Electron., vol. 9, no. 6, pp. 607-615, Nov. 1994.
6. W.-C. So, C. K. Tse, and Y.-S. Lee, "Development of a fuzzy logic controller for DC/DC converters: Design, computer simulation, and experimental evaluation," IEEE Trans. Power Electron., vol. 11, no. 1, pp. 24-32, Jan. 1996.
7. P. Mattavelli, L. Rossetto, G. Spiazzi, and P. Tenti, "General-purpose fuzzy controller for DC-DC converters," IEEE Trans. Power Electron. vol. 12, no. 1, pp. 79-86, Jan. 1997.
8. P. Mattavelli, L. Rossetto, and G. Spiazzi, "Small-signal analysis of DC-DC converters with sliding mode control," IEEE Trans. Power Electron., vol. 12, no. 1, pp. 96-102, Jan. 1997.
9. P. Mattavelli, L. Rossetto, G. Spiazzi, and P. Tenti, "General-purpose sliding-mode controller for DC/DC converter applications," in Proc. 24th Annu. IEEE PESC Rec., Jun. 20-24, 1993, pp. 609-615.
10. J. Mahdavi, A. Emadi, and H. A. Toliyat, "Application of state space averaging method to sliding mode control of PWM DC-DC converters," in Conf. Rec. 32nd IEEE IAS Annu. Meeting, Oct. 5-9, 1997, vol. 2, pp. 820-827.
11. J. Mahdavi, M. R. Nasiri, A. Agah, and A. Emadi, "Application of neural networks and state-space averaging to DC-DC PWM converters in sliding-mode operation," IEEE/ASME Trans. Mechatronics, vol. 10, no. 1, pp. 60-67, Feb. 2005.
12. A. Bellini and S. Bifaretti, "A quasi-resonant ZCS boost DC-DC converter for photovoltaic applications," in Proc. IEEE ISIE, Jun. 4-7, 2007, pp. 815-820.
13. J. Rodriguez, J. Pontt, C. A. Silva, P. Correa, P. Lezana, P. Cortes, and U. Ammann, "Predictive current control of a voltage source inverter," IEEE Trans. Ind. Electron., vol. 54, no. 1, pp. 495-503, Feb. 2007.
14. P. T. Krein, J. Bentsman, R. M. Bass, and B. L. Lesieutre, "On the use of averaging for the analysis of power electronic systems," IEEE Trans. Power Electron., vol. 5, no. 2, pp. 182-190, Apr. 1990.
15. A. Davoudi, J. Jatskevich, and T. De Rybel, "Numerical state-space average-value modeling of PWM DC-DC converters operating in DCM and CCM," IEEE Trans. Power Electron., vol. 21, no. 4, pp. 1003-1012, Jul. 2006.
16. D. Maksimovic, "Computer-aided small-signal analysis based on impulse response of DC/DC," IEEE Trans. Power Electron., vol. 15, no. 6, pp. 1183-1191, Nov. 2000.
17. G. W. Wester and R. D. Middlebrook, "Low-frequency characterization of switched DC-DC converters," IEEE Trans. Aerosp. Electron. Syst., vol. AES-9, no. 3, pp. 376-385, May 1973.
18. A. M. Wu, J. Xiao, D. Markovic, and S. R. Sanders, "Digital PWM control: Application in voltage regulation modules," in Proc. 30th Annu. IEEE PESC, Aug. 1999, vol. 1, pp. 77-83.
19. B. J. Patella, A. Prodic, A. Zirger, and D. Maksimovic, "High-frequency digital PWM controller IC for DC-DC converters," IEEE Trans. Power Electron., vol. 18, no. 1, pp. 438-446, Jan. 2003.
20. J. T. Mossoba and P. T. Krein, "Exploration of deadbeat control for DC-DC converters as hybrid systems," in Proc. IEEE Power Electron. Spec. Conf., 2005, pp. 1004-1011.
21. V. Utkin, J. Guldner, and J. Shi, Sliding Mode Control in Electromechanical Systems. London, U.K.: Taylor & Francis, 1999.
22. S. C. Bengea and R. A. DeCarlo, "Optimal control of switching systems," Automatica, vol. 41, no. 1, pp. 11-27, Jan. 2005.
23. P. Cortes, J. Rodriguez, D. E. Quevedo, and C. Silva, "Predictive current control strategy with imposed load current spectrum," IEEE Trans. Power Electron., vol. 23, no. 2, pp. 612-618, Mar. 2008.
24. N. H. McClamroch and I. Kolmanovsky, "Performance benefits of hybrid control design for linear and nonlinear systems," Proc. IEEE, vol. 88, no. 7, pp. 1083-1096, Jul. 2000.
25. R. De Keyser, J. Bonilla, and C. Ionescu, "A comparative study of several control techniques applied to a boost converter," in Proc. IEEE 10th Int. Conf. Optim. Elect. Electron. Equip. OPTIM, Brasov, Romania, 2006, pp. 71-78.
26. D. Liberzon, Switching in Systems and Control. Cambridge, MA: Birkhauser, 2003.
27. P. Peleties and R. DeCarlo, "A modeling strategy for hybrid systems based on event structures," Discr. Event Dyn. Syst., Theory Appl. vol. 3, no. 1, pp. 39-69, Mar. 1993.
28. S. Wei, K. Uthaichana, M. Zefran, R. DeCarlo, and S. Bengea, "Applications of numerical optimal control to nonlinear hybrid systems," Nonlinear Anal., Hybrid Syst., vol. 1, no. 2, pp. 264-279, Jun. 2007.
29. E. Camacho and C. Bordons, Model Predictive Control. Berlin, Germany: Springer-Verlag, 2004.
30. K. Uthaichana, "Controller designs and evaluations for nonlinear diesel engine and vehicle dynamical models," Ph.D. dissertation, School ECE, Purdue Univ., West Lafayette, IN, Dec. 2006.
31. M. Zefran, "Continuous methods for motion planning," Ph.D. dissertation, Univ. Pennsylvania, Philadelphia, PA, 1996.
32. J. Gregory and C. Lin, Constrained Optimization in the Calculus of Variations and Optimal Control Theory. New York: Van Nostrand, 1992.
33. C. P. Neuman and A. Sen, "A suboptimal control algorithm for constrained problems using cublic splines," Automatica, vol. 9, pp. 601-613, 1973.
34. R. Pytlak and R. B. Vinter, "Second-order method for optimal control problems with state constraints and piecewise-constant controls," in Proc. IEEE Conf Decision Control, New Orleans, LA, 1995, pp. 625-630.
35. S. Drakunov and V. Utkin, "Sliding mode observers. Tutorial," in Proc. 34th CDC, Dec. 1995, pp. 3376-3378.
36. A. Rundell, S. Drakunov, and R. DeCarlo, "A sliding mode observer and controller for stabilization of rotational motion of a vertical shaft magnetic bearing," IEEE Trans. Control Syst. Technol., vol. 4, no. 5, pp. 598-608, Sep. 1996.
37. S. Bengea, X. Li, and R. A. DeCarlo, "Combined controller-observer design for uncertain time delay systems with application to engine idle speed control," Trans. ASME J. Dyn. Syst. Meas. Control, vol. 126, no. 4, pp. 772-780, Dec. 2004.