Influence of specimen size on the scc growth rate of ni-alloys exposed to high temperature water

NACE - International Corrosion Conference Series

Volumn , Issue , 2006, Pages 065131-0651325

  Richey, Edward ^a   Morton, David S ^a   Moshier, William C ^b  

^a LOCKHEED MARTIN   (United States)

^b BETTIS ATOMIC POWER LABORATORY   (United States)

Author keywords

SCC; Specimen size; Stress corrosion cracking

Indexed keywords

ALLOY 600; COMPACT TENSION SPECIMEN; CRACK GROWTH; CRACK GROWTH BEHAVIOR; CRACK LENGTH; DISCRETE POINTS; DUCTILE TEARING; FRACTURE MODE; FRACTURE SURFACES; HIGH-TEMPERATURE WATER; INTERGRANULAR; ISOLATED REGIONS; PRIMARY WATER; SCC; SCC GROWTH RATES; SPECIMEN SIZE; STEADY STATE; STRESS CORROSION CRACK; TEST CONDITION;

CRACK PROPAGATION; CRACKING (CHEMICAL); CRACKS; DUCTILE FRACTURE; DUCTILITY; ELECTRIC POTENTIAL; GROWTH RATE; RESIDUAL STRESSES; TENSILE STRENGTH; WAKES;

STRESS CORROSION CRACKING;

EID: 69149108481     PISSN: 03614409     EISSN: None     Source Type: Book Series    
DOI: None     Document Type: Conference Paper

References (18)

1. th International Conference on Environmental Degradation of Materials in Nuclear Power Systems - Water Reactors, Stevenson, WA, American Nuclear Society, 2003.
2. th International Conference on Environmental Degradation of Materials in Nuclear Power Systems - Water Reactors, Stevenson, WA, American Nuclear Society, 2003.
3. M Itow, M Kikuchi, and S Suzuki, "Paper 00221: SCC Crack Growth Rates of Type 304 Stainless Steel at High K Region in Simulated BWR Environment," in CORROSION / 2000, Orlando, FL, National Association of Corrosion Engineers, 2000.
4. DS Morton, et al., "In Search of the True Temperature and Stress Intensity Factor Dependencies of PWSCC," in Proceedings of the Twelfth International Conference on Environmental Degradation of Materials in Nuclear Power Systems - Water Reactors, Salt Lake City, UT, American Nuclear Society, 2005.
5. DS Morton, SA Attanasio, and GA Young, "Primary Water SCC Understanding and Characterization Through Fundamental Testing in the Vicinity of the Nickel / Nickel Oxide Phase Transition," in Proceedings of the Tenth International Conference on Environmental Degradation of Materials in Nuclear Power Systems - Water Reactors, Lake Tahoe, NV, National Association of Corrosion Engineers, 2001.
6. SA Attanasio, et al., "Measurement of the Nickel / Nickel Oxide Phase Transition in High Temperature Hydrogenated Water Using the Contact Electric Resistance (CER) Technique," in Proceedings of the Tenth International Conference on Environmental Degradation of Materials in Nuclear Power Systems - Water Reactors, Lake Tahoe, NV, National Association of Corrosion Engineers, 2001.
7. GA Young, N Lewis, and DS Morton, "The Stress Corrosion Crack Growth Rate of Alloy 600 Heat Affected Zones Exposed to High Purity Water," in USNRC-ANL Conference on Vessel Head Penetration Inspection, Cracking, and Repairs, Gaithersburg, MD, Nuclear Regulatory Commission, 2003.
8. DH Lee, MS Choi, and UC Kim, "The Effect of Hydrogen on the Stress Corrosion Cracking of Alloy 600 in Simulated PWR Primary Water at 330°C," in Proceedings of the Tenth International Conference on Environmental Degradation of Materials in Nuclear Power Systems • Water Reactors, Lake Tahoe, NV, National Association of Corrosion Engineers, 2001.
9. T Cassagne, et al., "An Update on the Influence of Hydrogen on the PWSCC of Nickel Base Alloys in High Temperature Water," in Eighth International Symposium on Environmental Degradation of Materials in Nuclear Power Systems - Water Reactors, Amelia Island, FL, American Nuclear Society, 1997.
10. GL Webb and MG Burke, "Stress Corrosion Cracking Behavior of Alloy 600 in High Temperature Water," in Seventh International Symposium on Environmental Degradation of Materials in Nuclear Power Systems - Water Reactors, Breckenridge, CO, NACE, 1995.
11. AF Gourgues, PM Scott, and E Andrieu, "A Study of the Mechanism of Primary Water Stress Corrosion Cracking of Alloy 600," in Seventh International Symposium on Environmental Degradation of Materials in Nuclear Power Systems - Water Reactors, Breckenridge, CO, NACE, 1995.
12. JK Sung, "Effect of Heat Treatment on Caustic Stress Corrosion Cracking Behavior of Alloy 600," Corrosion, Vol. 55,1999, p. 1144-1154.
13. HA Domian, et al., "Effect of Microstructure on Stress Corrosion Cracking of Alloy 600 in High Purity Water," Corrosion, Vol. 33, 1977, p. 26-37.
14. RH Jones and SM Bruemmer, Environment-Induced Crack Growth Processes in Nickel-Base Alloys, in Environment-Induced Cracking Of Metals, R. Gangloff and M. Ives, Editors, National Association of Corrosion Engineers, 1988, p. 287-310.
15. RL Klueh, "Discontinuous Creep in Short-range Order Alloys," Materials Science and Engineering A, Vol. 54, 1982, p. 65-80.
16. AC Rainford, et al., "Discontinuous Creep in Nickel-Chrome Alloys," in Creep and Fracture of Engineering Materials and Structures, Swansea, UK, The Institute of Materials, 1993.
17. SN Montiero, TL Silveira, and IL May, "On the Nature of Strain Perturbations in the Creep Curves of Austenitic Stainless Steel," Scripta Metallurgica, Vol. 15, 1981, p. 957-960.
18. E Richey, DS Morton, and MK Schurman, "SCC Initiation Testing of Nickel-Based Alloys Using In-Situ Monitored Uniaxial Tensile Specimens," in Proceedings of the Twelfth International Conference on Environmental Degradation of Materials in Nuclear Power Systems - Water Reactors, Salt Lake City, UT, American Nuclear Society, 2005.