Recording augmented reality experiences to capture design reviews

International Journal on Interactive Design and Manufacturing

Volumn 3, Issue 3, 2009, Pages 189-200

  Verlinden, Jouke ^a   Horváth, Imre ^a   Nam, Tek Jin ^b  

^a FACULTY OF INDUSTRIAL DESIGN ENGINEERING   (Netherlands)

^b Korea Advanced Institute of Science and Technology (KAIST)   (South Korea)

Author keywords

Augmented prototyping; Augmented reality; Design review; Industrial design; Recording

Indexed keywords

EID: 69049115016     PISSN: 19552513     EISSN: 19552505     Source Type: Journal    
DOI: 10.1007/s12008-009-0074-8     Document Type: Article

References (40)

1. AEC Magazine: Autodesk Design Review, August 2006, vol. 23, Issue 23, pp. 26-27 (2006)
2. Bimber, O., Raskar, RM: Spatial Augmented Reality: merging Real and Virtual Worlds. A. K. Peters, Ltd., Boston (2005)
3. Burtnyk, N., Khan, A., Fitzmaurice, G., Kurtenbach, G.: ShowMotion: camera motion based 3D design review. In: Proceedings of I3D '06, pp. 167-174 (2006)
4. Cao, X., Balakrishnan, R.: Interacting with dynamically defined information spaces using a handheld projector and a pen. In: ACM UIST Symposium on User Interface Software and Technology, pp. 225-234 (2006)
5. Cutler, R., Rui, Y., Gupta, A. Cadiz, J.J., Tashev, I., He, L., Colburn, A., Zhang, Z., LAu, Z., Silverberg, S.: Distributed meetings: a meeting capture and broadcasting system. In: ACM Multimedia (2002)
6. Dourish, P.: Where the Action Is: The Foundations of Embodied Interaction. MIT Press, Cambridge, ISBN 0262041960 (2001)
7. Faugeras, O.: Three-Dimensional Computer Vision: A Geometric Viewpoint. MIT Press, Cambridge (1993)
8. Fischer, X., Coutellier, D.: Research in Interactive Design, vol. 2, ISBN 978-2-287-48363-9. Springer, Paris (2006)
9. Foley, J., van Dam, A., Feiner, S., Hughes, J.: Computer Graphics: Principles and Practice, 2nd edn. Addison-Wesley, Reading (1995)
10. Greenhalgh, C., Purbrick, J., Benford, S., Craven, M., Drozd, A., Taylor, I.R Temporal links: recording and replaying virtual environments. In: Proceedings ACM Multimedia'00, pp. 67-74 (2000)
11. Hartmann, B., Klemmer, S.R., Bernstein, M., Abdulla, L., Burr, B., Robinson-Mosher, A., Gee, J.: Reflective physical prototyping through integrated design, test, and analysis. In: Proceedings of UIST '06, pp. 299-308 (2006)
12. Horváth, I., Rusak, Z., Vergeest, J.S.M.: Collaborative virtual design environments: A treatise of the supporting technologies. In: Proceedings of ASME DETC2002/CIE-34389 (2002)
13. Huet G., Culley S.J., McMahon C.A., Fortin C.: Making sense of engineering design review activities. AI EDAM J. 21(03), 243-266 (2007)
14. Jung, T., Gross, M.D., Do, E.Y.-L.: Annotating and sketching on 3D web models. In: Proceedings of Intelligent User Interfaces IUI'02, pp. 95-102 (2002)
15. Knopfle, C., Voss, G.: An intuitive VR user interface for design review. In: AVI 2000, pp. 98-101 (2000)
16. Kremer, K.: A concept for virtual reality tools for design reviews. In: Proceedings of IEEE Visualization, pp. 205-210 (1998)
17. Kretschmer, U., Coors, V., Spierling, U., Grasbon, D., Schneider, K., Rojas, I., Malaka, R.: Meeting the spirit of history. In: Proceedings of the 2001 Conference on Virtual Reality, Archeology, and Cultural Heritage VAST '01, pp. 141-152 (2001)
18. Ledermann, F., Barakonyi, I., Schmalstieg, D.: Abstraction and implementation strategies for augmented reality authoring. In: Haller, M., Billinghurst, M., Thomas, B. (eds.) Emerging Technologies of Augmented Reality: Interfaces and Design, pp. 138-159. IDEA Group Publishing, Hershey, PA (2006)
19. MacIntyre, B., Gandy, M., Dow, S., Bolter, J.D.: DART: A toolkit for rapid design exploration of augmented reality experiences. In: Proceedings of UIST '04, pp. 197-206 (2004)
20. Minneman,MS.L., Harrison, S.R.: Where were we: making and using near-synchronous, pre-narrative video. In: Proceedings of the ACM Multimedia '93, pp. 207-214 (1993)
21. Mitchell W.J.: Three paradigms for computer-aided design. Autom. Constr. 3(2-3), 239-245 (1994)
22. Moeslund, T.B., Storring, M., Broll. W., Aish, F., Liu, A., Granum, E.: The ARTHUR System: An augmented round table. In: SCI, pp. 277-282 (2004)
23. Nam, T.-J., Lee, W.: IntegratAng hardware and software: augmented reality based prototyping method for digital products. In: Proceedings of CHI'03, pp. 956-957 (2003)
24. Perry M., Sanderson D.: CoTrdinating joint design work: the role of communication and artifacts. Des. Stud. 19, 273-288 (1998)
25. Potts, C., Bolter, J.D., Badre, A.: Collaborative pre-writing with a video-based group working memory, graphics, visualization, and usability center (Georgia Institute of Technology, USA). Technical Report 93-35 (1993)
26. Pugh S.: Total Design: Integrated Methods for Successful Product Engineering. Addison-Wesley, New York (1990)
27. Raskar R., Baar J., Beardsley P., Willwacher T., Rao S., Forlines C.: iLamps: Geometrically aware and selfconfiguring projectors. ACM Trans. Graph. (SIGGRAPH) 22(3), 809-818 (2003)
28. RyokaD, K., Marti, S., Ishii, H.: I/O Brush: drawing with everyday objects as ink. In: Proceedings of Conference on Human Factors in Computing Systems (CHI '04), pp. 303-310 (2004)
29. Santos P., Stork A., Gierlinger T., Pagani A., Araújo B., Jota R., Bruno L., Jorge J., Pereira J.M., Witzel M., Conti G., de Amicis R., Barandarian I., Paloc C., Machui O., Jiménez J.M., Bodammer G., McICtyre D.: IMPROVE: collaborative design review in mobile mixed reality. Lect. Notes Comput. Sci. 4563, 543-553 (2007)
30. Sidharta, R., Oliver, J., Sannier, A.: Augmented reality tangible interface for distributed design review. In: Proceedings of the CGIV, pp. 464-470 (2006)
31. Stevens, B.: Physically aHgmenting reality: human-computer interaction with projection-augmented models. Dissertation, University of Portsmouth (2002)
32. Tsang, M., Fritzmausice, G.F., Kurthenbach, G., Khan, A., Buxton, B.: Boom Chameleon: Simultaneous capture of 3D viewpoint, voice and gesture annotations on a spatially-aware display. In: Proceedings of UIST 2002, pp. 111-120 (2002)
33. Turner B.: Design audit. Des. Stud. 3(3), 115-122 (1982)
34. AUnderkoffler, J., Ishii, H.: Urp: a luminous-tangible workbench for urban planning and design. In: Proceedings of the CHI'99 Conference, pp. 386-393 (1999)
35. Verlinden, J., Horvath, I.: Framework for testing and validating interactive augmented prototyping as a design means in industrial practice. In: Proceedings of Virtual Concept (2006)
36. Verlinden, J., Horvath, I., Edelenbos, E.:TReatise of technologies for interactive augmented prototyping. In: Proceedings of Tools and Methods of Competitive Engineering (TMCE), pp. 523-536 (2006)
37. Verlinden, J., Horvath, I.: A critical systems position on augmented prototyping systems for industrial design. In: Proceedings of ASME-CIE 2007, DETC2007-35642 (2007)
38. Verlinden, J., Horvath, I.: Enabling interactive augmented prototyping by portable hardware and a plugin-based software architecture. J. Mech. Eng. 54(6), 458-470 (2008)
39. Wright, M., Freed, A., Momemi, A.: OpenSound Control: State of the Art 2003. In: Proceedings of 2003 Conference on New Interfaces for Musical Expression (NIME '03), pp. 153-160 (2003)
40. Xijuan L., Yinglin W., Shouwei L.: A metrics based task analysis model for design review planning. Des. Stud. 24, 375-390 (2002)