Review of the apparent molar heat capacities of NaCl(aq), HCl(aq), and NaOH(aq) and their representation using the pitzer model at temperatures from (298.15 to 493.15) K

Journal of Chemical and Engineering Data

Volumn 54, Issue 8, 2009, Pages 2158-2169

  Manyà, Joan J ^a   Antal Jr , Michael Jerry ^b  

^a UNIVERSITY OF HAWAII   (United States)

^b UNIVERSITY OF ZARAGOZA   (Spain)

Author keywords

[No Author keywords available]

Indexed keywords

ELECTROLYTES; FREE ENERGY; GIBBS FREE ENERGY; POLYNOMIALS; SODIUM CHLORIDE; SODIUM HYDROXIDE; SPECIFIC HEAT OF SOLIDS; SYSTEMATIC ERRORS;

APPARENT MOLAR HEAT CAPACITY; ELEVATED TEMPERATURE; EXPERIMENTAL UNCERTAINTY; GIBBS FREE ENERGY OF FORMATION; INDEPENDENT MEASUREMENT; ION INTERACTION MODEL; MOLAR HEAT CAPACITIES; TEMPERATURE DEPENDENT;

IONS;

EID: 69049104626     PISSN: 00219568     EISSN: None     Source Type: Journal    
DOI: 10.1021/je8009946     Document Type: Review

References (43)

1. Puigdomenech, I.; Rard, J. A.; Plyasunov, A. V.; Grenthe, I. Temperature Corrections to Thermodynamic data and Enthalpy Calculations. In Modelling in Aquatic Chemistry; Grenthe, I., Puigdomenech, I., Eds.; OECD Nuclear Energy Agency: 1997; pp 427.
2. 2O, and phase equilibria. J. Phys. Chem. Ref. Data 1992, 21, 793-829.
3. Hovey, J. K.; Hepler, L. G.; Tremaine, P. R. Thermodynamics of aqueous aluminate ion: standard partial molar heat capacities and volumes of tetrahydroxyaluminate(1-)(aq) from 10 to 55 degree.C. J. Phys. Chem. 1988, 92, 1323-1332.
4. 2(aq)]. J. Chem. Eng. Data 1995, 40, 398-406.
5. Hovey, J. K. Thermodynamics of Hydration of a 4+ Aqueous Ion: Partial Molar Heat Capacities and Volumes of Aqueous Thorium(IV) from 10 to 55 °C. J. Phys. Chem. B 1997, 101, 4321-4334.
6. Ballerat-Busserolles, K.; Ford, T. D.; Call, T. G.; Woolley, E. M. Apparent molar volumes and heat capacities of aqueous acetic acid and sodium acetate at temperatures from T ) 278.15 K to T ) 393.15 K at the pressure 0.35 MPa. J. Chem. Thermodyn. 1999, 31, 741-762.
7. Jones, J. S.; Ziemer, S. P.; Brown, B. R.; Woolley, E. M. Apparent molar volumes and apparent molar heat capacities of aqueous magnesium nitrate, strontium nitrate, and manganese nitrate at temperatures from 278.15 to 393.15 K and at the pressure 0.35 MPa. J. Chem. Thermodyn. 2007, 39, 550-560.
8. Pitzer, K. S. Thermodynamics of electrolytes. I. Theoretical basis and general equations. J. Phys. Chem. 1973, 77, 268-277.
9. Bradley, D. J.; Pitzer, K. S. Thermodynamics of electrolytes. 12. Dielectric properties of water and Debye-Huckel parameters to 350.degree.C and 1 kbar. J. Phys. Chem. 1979, 83, 1599-1603.
10. Fernandez, D. P.; Goodwin, A. R. H.; Lemmon, E. W.; Sengers, J. M. H. L.; Williams, R. C. A formulation for the static permittivity of water and steam at temperatures from 238 to 873 K at pressures up to 1200 MPa, including derivatives and Debye-Huckel coefficients. J. Phys. Chem. Ref. Data 1997, 26, 1125-1166.
11. Magalhaes, M. C. F.; Konigsberger, E.; May, P. M.; Hefter, G. Heat Capacities of Concentrated Aqueous Solutions of Sodium Sulfate, Sodium Carbonate, and Sodium Hydroxide at 25 °C. J. Chem. Eng. Data 2002, 47, 590-598.
12. Perron, G.; Desnoyers, J. E.; Millero, F. J. Apparent Molal Volumes and Heat Capacities of Some Sulfates and Carbonates in Water at 25 °C. Can. J. Chem. 1975, 53, 1134-1138.
13. Weisberg, S. Applied Linear Regression; John Wiley & Sons: Hoboken, NJ, 2005.
14. Marquardt, D. An Algorithm for Least-Squares Estimation of Nonlinear Parameters. SIAM J. Appl. Mathematics 1963, 11, 431-441.
15. Criss, C. M.; Millero, F. J. Modeling the Heat Capacities of Aqueous 1-1 Electrolyte Solutions with Pitzer's Equations. J. Phys. Chem. 1996, 100, 1288-1294.
16. Desnoyers, J. E.; de Visser, C.; Perron, G.; Picker, P. Reexamination of the Heat Capacities Obtained by Flow Microcalorimetry. Recommendation for the Use of a Chemical Standard. J. Solution Chem. 1976, 5, 605-616.
17. Smith-Magowan, D.; Wood, R. H. Heat capacity of aqueous sodium chloride from 320 to 600 K measured with a new flow calorimeter. J. Chem. Thermodyn. 1981, 13, 1047-1073.
18. Tanner, J. E.; Lamb, F. W. Specific heats of aqueous solutions of NaCl, NaBr, and KCl: Comparisons with related thermal properties. J. Solution Chem. 1978, 7, 303-316.
19. Perron, G.; Fortier, J.; Desnoyers, J. E. The apparent molar heat capacities and volumes of aqueous NaCl from 0.01 to 3 mol kg-1 in the temperature range 274.65 to 318.15 K. J. Chem. Thermodyn. 1975, 7, 1177-1184.
20. Pabalan, R. T.; Pitzer, K. S. Apparent molar heat capacity and other thermodynamic properties of aqueous potassium chloride solutions to high temperatures and pressures. J. Chem. Eng. Data 1988, 33, 354-362.
21. Helgeson, H. C.; Kirkham, D. H.; Flowers, G. C. Theoretical Prediction of the Thermodynamic Behavior of Aqueous-Electrolytes at High- Pressures and Temperatures 0.4. Calculation of Activity-Coefficients, Osmotic Coefficients, and Apparent Molal and Standard and Relative Partial Molal Properties to 600-Degrees-C and 5 Kb. Am. J. Sci. 1981, 281, 1249-1516.
22. Shock, E. L.; Helgeson, H. C. Calculation of the Thermodynamic and Transport-Properties of Aqueous Species at High-Pressures and Temperatures - Correlation Algorithms for Ionic Species and Equation of State Predictions to 5-Kb and 1000-Degrees-C. Geochim. Cosmochim. Acta 1988, 52, 2009-2036.
23. Tanger, J. C.; Helgeson, H. C. Calculation of the Thermodynamic and Transport-Properties of Aqueous Species at High-Pressures and Temperatures - Revised Equations of State for the Standard Partial Molal Properties of Ions and Electrolytes. Am. J. Sci. 1988, 288, 19-98.
24. Dick, J. Calculation of the relative metastabilities of proteins using the CHNOSZ software package. Geochem. Trans. 2008, 9, 10.
25. Wagner, W.; Pruss, A. The IAPWS formulation 1995 for the thermodynamic properties of ordinary water substance for general and scientific use. J. Phys. Chem. Ref. Data 2002, 31, 387-535.
26. Archer, D. G.; Wang, P. M. The dielectric constant of water and Debye-Huckel limiting law slopes. J. Phys. Chem. Ref. Data 1990, 19, 371-411.
27. Patterson, B. A.; Call, T. G.; Jardine, J. J.; Origlia-Luster, M. L.; Woolley, E. M. Thermodynamics for ionization of water at temperatures from 278.15 to 393.15 K and at the pressure 0.35 MPa: apparent molar volumes of aqueous KCl, KOH, and NaOH and apparent molar heat capacities of aqueous HCl, KCl, KOH, and NaOH. J. Chem. Thermodyn. 2001, 33, 1237-1262.
28. Tremaine, P. R.; Sway, K.; Barbero, J. A. The apparent molar heat capacity of aqueous hydrochloric acid from 10 to 140°C. J. Solution Chem. 1986, 15, 1-22.
29. Allred, G. C.; Woolley, E. M. Heat capacities of aqueous acetic acid, sodium acetate, ammonia, and ammonium chloride at 283.15, 298.15, and 313.15 K: δCp° for ionization of acetic acid and for dissociation of ammonium ion. J. Chem. Thermodyn. 1981, 13, 155-164.
30. Sharygin, A. V.; Wood, R. H. Volumes and heat capacities of aqueous solutions of hydrochloric acid at temperatures from 298.15 to 623 K and pressures to 28 MPa. J. Chem. Thermodyn. 1997, 29, 125-148.
31. Barner, H. E.; Scheuerman, R. V. Handbook of Thermochemical Data for Compounds and Aqueous Species; Wiley-Interscience: New York, 1973.
32. Criss, C. M.; Cobble, J. W. The Thermodynamic Properties of High Temperature Aqueous Solutions. IV. Entropies of the Ions up to 200° and the Correspondence Principle. J. Am. Chem. Soc. 1964, 86, 5385-5390.
33. Simonson, J. M.; Mesmer, R. E.; Rogers, P. S. Z. The enthalpy of dilution and apparent molar heat capacity of NaOH(aq) to 523 K and 40 MPa. J. Chem. Thermodyn. 1989, 21, 561-584.
34. Conti, G.; Gianni, P.; Papini, A.; Matteoli, E. Apparent Molar Heat- Capacity and Relative Enthalpy of Aqueous NaOH between 323 and 523 K. J. Solution Chem. 1988, 17, 481-497.
35. Ballerat-Busserolles, K.; Origlia, M. L.; Woolley, E. M. Calibration of a fixed-cell temperature-scanning calorimeter to measure precisesolution heat capacities from 275 to 398 K at 0.35 MPa. Thermochim. Acta 2000, 347, 3-7.
36. Cerdeiriña, C. A.; Míguez, J. A.; Carballo, E.; Tovar, C. A.; de la Puente, E.; Romaní, L. Highly precise determination of the heat capacity of liquids by DSC: calibration and measurement. Thermochim. Acta 2000, 347, 37-44.
37. Marshall, W. L.; Franck, E. U. Ion product of water substance, 0- 1000 °C, 1-10, 000 bar. New international formulation and its background. J. Phys. Chem. Ref. Data 1981, 10, 295.
38. Pitzer, K. S. Self-ionization of water at high temperature and thermodynamic properties of ions. J. Phys. Chem. 1982, 86, 4704-4708.
39. 2O to 2273 K and 500 MPa. AIChE J. 1989, 35, 1631-1638.
40. Chen, X.; Izatt, R. M.; Oscarson, J. L. Thermodynamic data for ligand interaction with protons and metal ions in aqueous solutions at high temperatures. Chem. ReV. 1994, 94, 467-517.
41. Tawa, G. J.; Pratt, L. R. Theoretical calculation of the water ion product KW. J. Am. Chem. Soc. 1995, 117, 1625-1628.
42. Bandura, A. V.; Lvov, S. N. The ionization constant of water over wide ranges of temperature and density. J. Phys. Chem. Ref. Data 2006, 35, 16-30.
43. Schrödle, S.; Königsberger, E.; May, P. M.; Hefter, G. Heat capacities of aqueous solutions of sodium hydroxide and water ionization up to 300 °C at 10 MPa. Geochim. Cosmochim. Acta 2008, 72, 3124-3138.