Laser-assisted Zr/ZrO2 coating on Ti for load-bearing implants

Acta Biomaterialia

Volumn 5, Issue 7, 2009, Pages 2800-2809

  Balla, Vamsi Krishna ^a   Xue, Weichang ^a   Bose, Susmita ^a   Bandyopadhyay, Amit ^a  

^a Washington State University   (United States)

Author keywords

Laser processing; Laser engineered net shaping (LENS); Oxidation; Oxidized zirconium; Wear

Indexed keywords

BIOCOMPATIBILITY; COATINGS; NEODYMIUM LASERS; OXYGEN; PARTIAL PRESSURE; WEAR OF MATERIALS; YTTRIUM ALUMINUM GARNET; ZIRCONIA; ZIRCONIUM ALLOYS;

IN-VITRO; LASER ENGINEERED NET SHAPING; LASER PROCESS; LASER-ASSISTED; LASER-ENGINEERED NET SHAPING; LOAD-BEARING; LOW FRICTION; OXIDIZED ZIRCONIUM; OXYGEN PARTIAL PRESSURE; ZR ALLOYS;

OXIDATION;

TITANIUM; ZIRCONIUM; ZIRCONIUM OXIDE;

ARTICLE; BIOCOMPATIBILITY; CELL INTERACTION; CONTROLLED STUDY; HUMAN; HUMAN CELL; IMPLANT; IN VITRO STUDY; LOADING TEST; MATERIAL COATING; NEODYMIUM LASER; OSTEOBLAST; OXIDATION KINETICS; OXYGEN TENSION; PRIORITY JOURNAL; TEMPERATURE MEASUREMENT; WETTABILITY;

EID: 68949098325     PISSN: 17427061     EISSN: None     Source Type: Journal    
DOI: 10.1016/j.actbio.2009.03.032     Document Type: Article

References (43)

1. Cooper R.A., McAllister C.M., Borden L.S., and Bauer T.W. Polyethylene debris-induced osteolysis and loosening in uncemented total hip arthroplasty. J Arthroplasty 7 (1992) 285-290
2. Howie D.W., Rogers S.D., Haynes D.R., and Pearcy M.J. The role of small polyethylene wear particles in inducing the release of mediators known to stimulate bone resorption. Trans Orthop Res Soc 19 (1994) 201-208
3. McGee M.A., Howie D.W., Costi K., Haynes D.R., Wildenauer C.I., and Pearcy M.J. Implant retrieval studies of the wear and loosening of prosthetic joints: a review. Wear 241 (2000) 158-165
4. Edidin A.A., Rimnac C.M., Goldberg V.M., and Kurtz S.M. Mechanical behaviour, wear surface morphology, and clinical performance of UHMWPE acetabular components after 10 years of implantation. Wear 250 (2001) 152-158
5. Bartel D.L., Bicknell V.L., and Wright T.M. The effect of conformity, thickness, and material on stresses in ultrahigh molecular weight components for total joint replacement. J Bone Joint Surg 68A (1986) 1041-1051
6. Ries M.D., Scott M.L., and Jani S. Relationship between gravimetric wear and particle generation in hip simulators: conventional compared with cross linked polyethylene. J Bone Joint Surg 83A Suppl. 2 (2001) 116-122
7. Koshino T., Okamoto R., Tagagi T., Yamamoto K., and Saito T. Cemented ceramic YMCK total knee arthroplasty in patients with severe rheumatoid arthritis. J Arthroplasty 17 (2002) 1009-1015
8. Rieker C., and Kottig P. In vivo tribological performance of 231 metal-on-metal hip articulations. Hip Int 12 (2002) 73-76
9. Douglas N., Christopher P.R., Javad P., Daniel J.B., Stefan E., and Andre B. Metal-on-metal versus metal-on-polyethylene bearings in total hip arthroplasty: a matched case-control study. J Arthroplasty 19 7(Suppl. 2) (2004) 35-41
10. Davidson JA, Poggie RA, Mishra AK, Salehi A, Harbaugh M. Increased wear and contact stress from increased polyethylene stiffness in prosthetic knee and hip articulation, In: Goh J, Nather A, editors. Proceedings of the 7th international conference on biomedical engineering, 2-4 December, Singapore: 1992. p. 152-54.
11. Fisher J., Firkins P., Reeves E.A., Hailey J.L., and Isaac G.H. The influence of scratches to metallic counterfaces on the wear of ultra-high molecular weight polyethylene. Proc Inst Mech Eng [H] 209 (1995) 263-264
12. Dowson D., Taheri S., and Wallbridge N.C. The role of counterface imperfections in the wear of polyethylene. Wear 119 (1987) 277-293
13. Davidson J.A. Characteristics of metal and ceramic total hip bearing surfaces and their effect on long term ultra high molecular weight PE wear. Clin Orthop 294 (1993) 361-378
14. Platon F., Fournier P., and Rouxel S. Tribological behaviour of DLC coatings compared with different materials used in hip joint prostheses. Wear 250 (2001) 227-236
15. McNamarta B.P., Murphy H., and Morshed M.M. Adhesion properties of diamond-like coated orthopaedic biomaterials. Diamond Relat Mater 10 (2001) 1098-1102
16. Goldberg J.R., and Gilbert J.L. The electrochemical and mechanical behavior of passivated and TiN/AlN-coated Co-Cr-Mo and Ti6Al4V alloys. Biomaterials 25 (2004) 851-864
17. Liu C., Bi Q., and Matthews A. Tribological and electrochemical performance of PVD TiN coatings on the femoral head of Ti-6Al-4V artificial hip joints. Surf Coat Technol 163-164 (2003) 597-604
18. 2)-coated zirconium-2.5Nb alloy for prosthetic knee bearing applications. Bioceramics 5 (1992) 389-401
19. Mishra A.K., and Davidson J.A. Zirconia/zirconium: a new abrasion resistant material for orthopaedic applications. Mater Technol 8 (1993) 16-21
20. White S.E., Whiteside L.A., McCarthy D.S., Anthony M., and Poggie R.A. Simulated wear with cobalt-chromium and oxidized zirconium knee femoral components. Clin Orthop 309 (1994) 176-184
21. Spector M., Ries M.D., Bourne R.B., Sauer W.S., Long M., and Hunter G. Wear performance of ultra-high molecular weight polyethylene against oxidized zirconium total knee femoral components. J Bone Joint Surg 83A Suppl. 2 (2001) 80-86
22. Ries M.D., Salehi A., Widding K., and Hunter G. Polyethylene wear performance of oxidized zirconium and cobalt-chromium knee components under abrasive conditions. J Bone Joint Surg 84-A Suppl. 2 (2002) 129-135
23. Patel A.M., and Spector M. Oxidized zirconia for hemiarthroplasty: an in vitro assessment. Biomaterials 8 (1995) 169-175
24. Goodman S.B., Davidson J.A., Fornasier V.L., and Mishra A.K. Histological response to cylinders of low modulus titanium alloy (Ti-13Nb-13Zr) and a wear-resistant zirconium alloy (Zr-2.5Nb) implanted in the rabbit tibia. J Appl Biomater 4 (1993) 331-339
25. Laskin R.S. An oxidized Zr ceramic surfaced femoral component for total knee arthroplasty. Clin Orthop Rel Res 416 (2003) 191-196
26. Hobbs L.W., Rosen V.B., Mangin S.P., Treska M., and Hunter G. Oxidation microstructures and interfaces in the oxidized zirconium knee. Int J Appl Ceram Technol 2 3 (2005) 221-246
27. Pemsler J.P. Studies on the oxygen gradients in oxidizing metals: I. Zirconium. J Electrochem Soc 111 4 (1964) 381-385
28. Urbanic V.F., and Smeltzer W.W. Oxidation properties of a zirconium-2.7 w/o niobium alloy in the temperature range 650-1000 °C. J Electrochem Soc 119 11 (1972) 1527-1531
29. Pemsler J.P. Studies on the oxygen gradients in oxidizing metals: III. Kinetics of the oxidation of zirconium at high temperatures. J Electrochem Soc 112 5 (1965) 477-484
30. Vamsi Krishna B., Xue W., Bose S., and Bandyopadhyay A. Engineered porous metals for implants. JOM 60 5 (2008) 45-48
31. Vamsi Krishna B., Xue W., Bose S., and Bandyopadhyay A. Functionally graded Co-Cr-Mo coating on Ti-6Al-4V alloy structures. Acta Biomater 4 (2008) 697-706
32. Vamsi Krishna B., Bose S., and Bandyopadhyay A. Low stiffness porous Ti structures for load-bearing implants. Acta Biomater 3 (2007) 997-1006
33. Winn S.R., Randolph G., Uludag H., Wong S.C., Hair G.A., and Hollinger J.O. Establishing an immortalized human osteoprecusor cell line: OPC1. J Bone Miner Res 14 (1999) 1721-1733
34. Balla V.K., Bandyopadhyay P.P., Bose S., and Bandyopadhyay A. Compositionally graded yttria-stabilized zirconia coating on stainless steel using laser engineered net shaping (LENS™). Scripta Mater 57 (2007) 861-864
35. 2 laser irradiation. J Phys D Appl Phys 37 (2004) 86-92
36. Levitan J., Draley J.E., and Van Drunen C.J. Low-pressure oxidation of zirconium. J Electrochem Soc 114 11 (1967) 1086-1089
37. Mori S. Adsorption and lubrication. J Tribol 36 (1991) 161
38. Gates R., Hsu S., and Klaus E. Tribochemical mechanism of alumina with water. STLE Trib Trans 32 (1989) 357
39. Semlitsch M., Tehmann M., Weber H., Dorre E., and Willert H.G. New prospects for a prolonged functional life-span of artificial hip joints by using the material combination polyethylene/aluminium oxide ceramic/metal. J Biomed Mater Res 11 (1977) 537-552
40. Xue W., et al. Preparation and cell-materials interactions of plasma sprayed strontium containing hydroxyapatite coating. Surf Coat Technol 201 8 (2007) 4685-4693
41. Hao L., and Lawrence J. Effects of Nd:YAG laser treatment on the wettability characteristics of a zirconia-based bioceramic. Opt Lasers Eng 44 (2006) 803-814
42. Hao L., Lawrence J., and Chian K.S. Osteoblast cell adhesion on a laser modified zirconia based bioceramic. J Mater Sci Mater Med 16 (2005) 719-726
43. Christensen A., and Carter E.A. First-principles study of the surfaces of zirconia. Phys Rev B Condens Mater 58 (1998) 8050-8064