Studies on synthesis of modified epoxidized novolac resin from renewable resource material for application in surface coating

Journal of Applied Polymer Science

Volumn 114, Issue 3, 2009, Pages 1471-1484

  Yadav, Ranjana ^a   Srivastava, Poonam ^b   Srivastava, Deepak ^a  

^a HARCOURT BUTLER TECHNOLOGICAL INSTITUTE   (India)

^b DEFENCE MATERIALS AND STORES RESEARCH AND DEVELOPMENT ESTABLISHMENT   (India)

Author keywords

Carboxyl terminated butadiene acrylonitrile copolymer; Cardanol based epoxidized novolac resin; Chemical resistance thermal stability; Mechanical properties

Indexed keywords

BASIC MEDIUM; BLEND SYSTEM; CARBOXYL-TERMINATED BUTADIENE ACRYLONITRILE COPOLYMER; CARDANOL-BASED EPOXIDIZED NOVOLAC RESIN; CARDANOLS; CURE TIME; CURING AGENTS; DICARBOXYLIC ACID; EPICHLOROHYDRIN; FOURIER TRANSFORM INFRARED; FTIR ANALYSIS; GEL PERMEATION; GPC ANALYSIS; GROWTH REACTIONS; MALDI-TOF; MASS LOSS; MOLAR EXCESS; MOLAR RATIO; NOVOLAC RESIN; NOVOLAC-TYPE PHENOLIC RESIN; POLYAMINES; PURE EPOXY; REACTION MECHANISM; RENEWABLE RESOURCE; SUCCINIC ACIDS; SURFACE COATINGS; THERMAL STABILITY;

ACIDS; BLENDING; BUTADIENE; CHEMICAL RESISTANCE; CHEMICAL STABILITY; COPOLYMERIZATION; CURING; EPOXY RESINS; FOURIER TRANSFORM INFRARED SPECTROSCOPY; GELATION; MANGANESE; MANGANESE COMPOUNDS; MECHANICAL PROPERTIES; NUCLEAR MAGNETIC RESONANCE; NUCLEAR MAGNETIC RESONANCE SPECTROSCOPY; PHENOLS; RESINS; SPECTROSCOPIC ANALYSIS; SYNTHESIS (CHEMICAL); SYSTEM STABILITY; THERMODYNAMIC STABILITY;

PHENOLIC RESINS;

COATING; EPOXY RESIN; POLYBUTADIENE; POLYMER BLEND; SURFACE MODIFICATION; SYNTHESIS; THERMAL STABILITY;

EID: 68749097037     PISSN: 00218995     EISSN: 10974628     Source Type: Journal    
DOI: 10.1002/app.30581     Document Type: Article

References (53)

1. Attanasi, O. A.; Bunatti, S. B. La Chim e I'Industria 1996, 78, 693.
2. Prabhakaran, K.; Narayan, A.; Pvithram, C. J Eur Ceram Soc 2001, 21, 873.
3. Pillai, C. K. S.; Prasad, V. S.; Sudha, J. D.; Bera, S. C.; Menon, A. R. R. J Appl Polym Sci 1990, 41, 2487.
4. Bhunia, H. P.; Jana, R. N.; Basak, A.; Lenka, S.; Nando, G. B. J Appl Polym Sci 1998, 36, 391.
5. Bhunia, H. P.; Nando, G. B.; Chaki, T. K.; Basak, A.; Lenka, S.; Nayak, P. L. Eur Polym J 1991, 35, 1381.
6. Bisanda, E. Ph.D. Thesis, Department of Engineering and Applied Science, University of Bath, Bath, 1991.
7. Mwaikambo, L. Ph.D. Thesis, Department of Engineering and Applied Science, University of Bath, Bath, 2002.
8. Panasare, V.; Kulkarni, A. J Ind Chem Soc 1964, 41, 251.
9. Menon, A. R. R.; Pillai, C. K. S.; Sudha, J. D.; Mathew, A. G. J Sci Ind Res 1985, 44, 324.
10. Kinloch, A. J.; Reiw, C. K. Rubber-Toughened Plastics Advances in Chemistry; Amrerican Chemical Society: Washington, DC, 1989; Series 22, p 67.
11. Kinloch, A. J.; Young, R. J. Fracture Behaviour of Polymers; Applied Science: London, 1983.
12. Huang, J.; Kinloch, A. G. Polymer 1992, 33, 1330.
13. Huang, J.; Kinloch, A. J. J Mater Sci 1992, 27, 2763.
14. Riew, C. K.; Rowe, E. H.; Siebert, A. R. Presented at the ACS Meeting, Symposium on Toughness and Brittleness of Plastics, Division of Organic Coatings and Plastics, Atlantic City, NJ, 1974.
15. Frigone, M. E.; Masica, L.; Aciermo, D. Eur Polym J 1995, 31, 1021.
16. Bascom, W. D.; Cottington, R. L.; Jones, R. L.; Peyser, P. J Appl Polym Sci 1975, 19, 2545.
17. Tripathi, G.; Srivastava, D. Mater Sci Eng A 2007, 443, 262.
18. Pearson, R. A.; Yee, A. F. J Mater Sci 1989, 24, 2571.
19. Clayton, M. Epoxy Resin-Chemistry and Technology; Marcel Dekker: New York, 1988.
20. Knop, A.; Schieb, W. Chemistry and Application of Phenolic Resins; Springer Verlag: New York, 1979.
21. Devi, A.; Chandra, K.; Srivastava, D. In Proceedings of the 14th National Thermal Analysis Symposium; Vadodra, India, 2004; p 22.
22. Devi, A.; Srivastava, D. Mater Sci Eng A 2007, 458, 336.
23. Ting, R. Y. Elastomer Modified Epoxy Resins, Chemistry and Technology, 2nd ed.; Marcel Dekker: New York, 1988; pp 561-601.
24. Urabanski, J.; Winkski, W. C.; Janika, K. l.; Majewsta, F.; Zowall, H. Handbook of Analysis of Synthetic Polymers and Plastics; Ellis Horward ltd. Pub.: Chicketa, 1977.
25. Sathiyalekshmi, K. Bull Mater Sci 1993, 16, 137.
26. Chakrawarti, P. B.; Mehta, V. Ind J Tech 1987, 25, 109.
27. Sperling, G. R. J Am Chem Soc 1954, 76, 1190.
28. Mythili, C.; Retna, A.; Gopalkrishnan, S. Bull Mater Sci 2004, 27, 235.
29. Tyman, J. H. P. Chem Soc Rev 1979, 8, 499.
30. Huang, J.; Xu, M.; Lin, M.; Lin, Q.; Chem, Y.; Chu, J.; Dai, H.; Zou, Y. J Appl Polym Sci 2005, 97, 652.
31. Kuriaposa, A. P.; Manjooran, S. K. B. Surf Coat Technol 2001, 145, 132.
32. Gardziella, A.; Pilato, L. A.; Knop, A. Phenolic Resins; Springer-Verlag: New York, 2000.
33. Auad, M. L.; Nutt, S. R.; Stefani, P. M.; Aranguren, M. I. J Appl Polym Sci 2006, 102, 4430.
34. Lee, H.; Neville, K., Eds. Hand Book of Epoxy Resins; McGraw-Hill: New York, 1982.
35. Evtushenko, Y. M.; Jvanov, V. M.; Zaitsev, B. E. J Anal Chem 2003, 58, 347.
36. Smith, A. Applied Infrared Spectroscopy; Wiley: New York, 1979. [Translated under the title Prikladnaya Ik-Spektroscopiya, Moscow, Mir, 1982].
37. Horie, K.; Hiura, H.; Sawada, M.; Mita, I.; Kambe, H. J Polym Sci Part A- 1: Polym Chem1970, 8, 1357.
38. Ruzenberg, B. A. Adv Polym Sci 1985, 75, 113.
39. Wise, C. W.; Cook, W. D.; Goodwin, A. A. Polymer 2000, 41, 4625.
40. Calabrese, L.; Valenza, A. Compos Sci Technol 2003, 63, 851.
41. Nigam, V.; Saraf, M. N.; Mathur, G. N. J Therm Anal 1997, 49, 483.
42. Kushenbaum, S. L.; Bell, J. P. J Appl Polym Sci 1985, 30, 1875.
43. Manzione, L. T.; Gillham, J. K. J Appl Polym Sci 1981, 26, 907.
44. Ratana, D.; Banthia, A. K.; Deb, P. C. J Appl Polym Sci 2001, 80, 1792.
45. Latha, P. B.; Adhinaryanan, K.; Ramaswamy, R. Int J Adhes Adhesives 1994, 14, 57.
46. Cataloni, A.; Bonicelli, M. G. Thermochem Acta Vol 2005, 438, 126.
47. Aijuan, G.; Guozheng, L. J Appl Polym Sci 2003, 89, 359.
48. Maity, T.; Samanta, B. C.; Dalai, S.; Banthia, A. K. Mater Sci Eng A 2007, 464, 38.
49. Kaji, M.; Nakahara, K.; Endo, T. J Appl Polym Sci 1999, 74, 690.
50. Sulton, J. N.; Garry, M. J Polym Eng Sci 1973, 13, 29.
51. Verchere, D.; Sautereau, H.; Pasculat, J. P. J Appl Polym Sci 1990, 41, 467.
52. Chan, L. C.; Gillham, J. K.; Kinloch, A. J.; Shaw, S. J. In Rubber- Modified Epoxies: Morphology, Transitions and Mechanical Properties; Riew, C. K.; Gillham, J. K., Eds.; American Chemical Society: Washington, DC, 1984; Vol. 208, p 274.
53. Sue, H. J.; Garciameitin, E. I.; Pickelman, D. M. In Polymer Toughening; Arands, C. B., Ed.; Marcel Dekker: New York, 1996; pp 131-173.