Synthesis and properties of cardanol-based epoxidized novolac resins modified with carboxyl-terminated butadiene-acrylonitrile copolymer

Journal of Applied Polymer Science

Volumn 114, Issue 3, 2009, Pages 1670-1681

  Yadav, Ranjana ^a   Srivastava, Deepak ^a  

^a HARCOURT BUTLER TECHNOLOGICAL INSTITUTE   (India)

Author keywords

Blends; Differential scanning calorimetry (DSC); FT IR; Gel permeation chromatography (GPC)

Indexed keywords

ACRYLONITRILE COPOLYMER; BASIC MEDIUM; BLEND MORPHOLOGY; BLENDS; CARDANOLS; DICARBOXYLIC ACID; EPICHLOROHYDRIN; FT-IR; GEL PERMEATION CHROMATOGRAPHY (GPC); MASS SPECTROSCOPY; MATRIX ASSISTED LASER DESORPTION/IONIZATION; MOLAR EXCESS; MOLAR RATIO; NOVOLAC RESIN; NOVOLAC-TYPE PHENOLIC RESIN; POLYAMINES; PROPERTY CHANGES; PROTON NUCLEAR MAGNETIC RESONANCE; SCANNING ELECTRONS; SUCCINIC ACIDS; THERMALLY STABLE; WEIGHT RATIOS;

BLENDING; BUTADIENE; CHROMATOGRAPHIC ANALYSIS; CHROMATOGRAPHY; COPOLYMERIZATION; CURING; DESORPTION; DIFFERENTIAL SCANNING CALORIMETRY; FOURIER TRANSFORM INFRARED SPECTROSCOPY; GEL PERMEATION CHROMATOGRAPHY; GELATION; GELS; MASS SPECTROMETRY; NUCLEAR MAGNETIC RESONANCE; NUCLEAR MAGNETIC RESONANCE SPECTROSCOPY; PHENOLS; RESINS; SCANNING; SCANNING ELECTRON MICROSCOPY; SPECTROSCOPIC ANALYSIS; SPECTROSCOPY; SYNTHESIS (CHEMICAL);

PHENOLIC RESINS;

ACRYLONITRILE; CATALYST; COPOLYMER; DESORPTION; FOURIER TRANSFORM ANALYSIS; MOLECULAR WEIGHT; PERMEABILITY; RESIN;

EID: 68749092722     PISSN: 00218995     EISSN: 10974628     Source Type: Journal    
DOI: 10.1002/app.29376     Document Type: Article

References (50)

1. Attanasi, O. A.; Bunatti, S. B. Chim Ind 1996, 78, 693.
2. Prabhakaran, K.; Narayan, A.; Pavithran, C. J. Eur Ceram Soc 2001, 21, 2873.
3. Pillai, C. K. S.; Prasad, V. S.; Sudha, J. D.; Bera, S. C.; Menon, A. R. R. J Appl Polym Sci 1990, 41, 2487.
4. Bhunia, H. P.; Jana, R. N.; Basak, A.; Lenka, S.; Nando, G. B. J Appl Polym Sci 1998, 36, 391.
5. Kim, Y. H.; An, E. S.; Park, S. Y.; Song, B. K. J Mol Catal B 2007, 45, 39.
6. Kinloch, A. G.; Reiw, C. K. Rubber-Toughened Plastics; Advances in Chemistry 22; American Chemical Society: Washington, DC, 1985; p 67.
7. Kinloch, A. G.; Young, R. J. Fracture Behaviour of Polymers; Applied Science: London, 1983.
8. Huang, J.; Kinloch, A. G. Polymer 1992, 33, 1330.
9. Huang, J.; Kinloch, A. G. J Mater Sci 1992, 27, 2763.
10. Riew, C. K.; Rowe, E. H.; Siebert, A. R. Presented at the ACS Symposium on Toughness and Brittleness of Plastics (Division of Organic Coatings and Plastics), Atlantic City, NJ, 1974.
11. Frigone, M. E.; Masica, L.; Aciermo, D. Eur Polym J 1995, 31, 1021.
12. Bascom, W. D.; Cottington, R. L.; Jones, R. L.; Peyser, P. J Appl Polym Sci 1975, 19, 2545.
13. Shi, H.; Fang, Z.; Gu, A.; Tong, L.; Xu, Z. J Appl Polym Sci 2007, 106, 3098.
14. Knop, A.; Schieb, W. Chemistry and Application of Phenolic Resins; Springer-Verlag: New York, 1979.
15. Devi, A.; Chandra, K.; Srivastaava, D. Proc Natl Therm Anal Symp 2004, 14, 22.
16. Devi, A.; Srivastava, D. Mater Sci Eng A 2007, 458, 336.
17. Mishra, A. K.; Pandey, G. N. J Appl Polym Sci 1985, 30, 969.
18. Urabanski, J.; Czer Winkski, W.; Janika, K.; Majewsta, F.; Zowall, H. Handbook of Analysis of Synthetic Polymers and Plastics; Ellis Horwood: Chichester, England, 1977.
19. Sperling, G. R. J Am Chem Soc 1954, 76, 1190.
20. Sathiyalekshmi, K. Bull Mater Sci 1993, 16, 137.
21. Chakrawarti, P. B.; Mehta, V. Ind J Technol 1987, 25, 109.
22. Mythili, C.; Retna, A.; Gopalkrishnan, S. Bull Mater Sci 2004, 27, 235.
23. Tyman, J. H. P. Chem Soc Rev 1979, 8, 499.
24. Antony, R.; Pillai, C. K. S. J Appl Polym Sci 1993, 49, 2129.
25. Huang, J.; Xu, M.; Lin, M.; Lin, Q.; Chem, Y.; Chu, J.; Dai, H.; Zou, Y. J Appl Polym Sci 2005, 97, 652.
26. Kuriaposa, A. P.; Manjooran, S. K. B. Surf Coat Technol 2001, 145, 132.
27. Gardziella, A.; Pilato, L. A.; Knop, A. Phenolic Resins; Springer-Verlag: New York, 2000.
28. Lin-Gibson, S.; Baranauskas, V.; Riffle, J. S.; Sorathia, V. Polymer 2000, 43, 7389.
29. Lee, H.; Neville, K. Hand Book of Epoxy Resins; McGraw-Hill: New York, 1982.
30. Evtushenko, Y. M.; Jvanov, V. M.; Zaitsev, B. E. J Anal Chem 2003, 58, 47.
31. Smith, A. Prikladnaya Ik-Spektroscopiya; Mir: Moscow, 1982.
32. Nigam, V.; Setua, D. K.; Mathur, G. N. J Appl Polym Sci 1998, 70, 537.
33. Ramos, V. D.; da Costa, H. M.; Soares, V. L. P.; Nascimento, R. S. V. Polym Test 2005, 24, 219.
34. Chem, D.; Pascault, J. P.; Bertsch, R. J.; Drake, R. S.; Siebert, A. R. J Appl Polym Sci 1994, 51, 1959.
35. Horie, K.; Hiura, H.; Sawada, M.; Mita, I.; Kambe, H.J Polym Sci Part A-1: Polym Chem 1970, 8, 1357.
36. Smith, I. T. Polymer 1961, 2, 95.
37. Rozenberg, B. A. Adv Polym Sci 1985, 75, 113.
38. Fisher, W.; Hofman, W. J Polym Sci 1954, 12, 497.
39. Tmomas, R.; Durix, S.; Sinturel, C.; Omonov, T.; Goossens, S.; Groeninckx, G.; Moldenaers, P.; Thomas, S. Polymer 2007, 48, 1695.
40. Wise, C. W.; Cook, W. D.; Goodwin, A. A. Polymer 2000, 41, 4625.
41. Calabrese, L.; Valenza, A. Compos Sci Technol 2003, 63, 851.
42. Butta, E.; Levita, G.; Marchetti, A.; Lazzeri, A. Polym Sci Eng 1986, 26, 63.
43. Maity, T.; Samanta, B. C.; Dalai, S.; Banthia, A. K. Mater Sci Eng A 2007, 464, 38.
44. Kaji, M.; Nakahara, K.; Endo, T. J Appl Polym Sci 1999, 74, 690.
45. Menon, A. R. R.; Agibodion, A. I.; Pillai, C. K. S.; Mathew, A. G.; Bhagawan, S. S. Eur Polym J 2002, 38, 163.
46. Srivastava, K.; Kauushik, M. K.; Srivastava, D.; Tripathi, S. K. J Appl Polym Sci 2006, 102, 4171.
47. Chan, L. C.; Gillham, J. K.; Kinloch, A. G.; Shaw, S. J. In Rubber-Modified Epoxies: Morphology, Transitions and Mechanical Properties; Riew, C. K.; Gillham, J. K., Eds.; American Chemical Society: Washington, DC, 1984; Vol.208, p 274.
48. Douglass, S. K.; Beaumont, P. W. R.; Ashby, M. F. J Mater Sci 1980, 15, 1109.
49. Tripathi, G.; Srivastava, D. Adv Polym Sci 2008, 26, 258.
50. Sue, H. J.; Garciameitin, E. I.; Pickelman, D. M. In Polymer Toughening; Arands, C. B., Ed.; Marcel Dekker: New York, 1996; p 131.