Investigations on the influence of graphite filler on dry sliding wear and abrasive wear behaviour of carbon fabric reinforced epoxy composites

Wear

Volumn 267, Issue 9-10, 2009, Pages 1405-1414

  Suresha, B ^a   Siddaramaiah, ^b   Kishore, ^c   Seetharamu, S ^d   Kumaran, P Sampath ^d  

^a NATIONAL INSTITUTE OF ENGINEERING   (India)

^b SRI JAYACHAMARAJENDRA COLLEGE OF ENGINEERING   (India)

^c INDIAN INSTITUTE OF SCIENCE   (India)

^d CENTRAL POWER RESEARCH INSTITUTE   (India)

Author keywords

Carbon epoxy composites; Dry sliding wear; Graphite filler; Two body wear; Wear mechanisms

Indexed keywords

ABRASIVE WEARS; CARBON FABRICS; CARBON-EPOXY; CARBON-EPOXY COMPOSITE; CARBON-EPOXY COMPOSITES; DRY CONTACT; DRY SLIDING WEAR; EXPERIMENTAL STUDIES; FIBER FRACTURE; GRAPHITE SURFACES; HARDENED STEEL; MASS LOSS; MULTI-PASS; NORMAL LOADS; PIN ON DISC; REFERENCE MATERIAL; REINFORCED EPOXY; SIC PAPER; SLIDING DISTANCES; SLIDING VELOCITIES; SLIDING WEAR; SURFACE DAMAGES; TWO-BODY WEAR; WEAR CHARACTERISTICS; WEAR LOSS; WEAR MECHANISMS; WEAR RATES; WEAR TESTER; WEAR VOLUME;

ABRASION; ABRASIVES; CARBON FIBERS; CURING; EXPERIMENTS; FABRICS; GRAPHITE; MICROCRACKING; SCANNING ELECTRON MICROSCOPY; SILICON CARBIDE; TRIBOLOGY;

FILLERS;

EID: 68649091011     PISSN: 00431648     EISSN: None     Source Type: Journal    
DOI: 10.1016/j.wear.2009.01.026     Document Type: Article

References (44)

1. Friedrich K. Compos. Sci. Technol. 22 (1985) 43-74
2. ASM Handbook, ASM International, Materials Park, USA, vol. 18, 1992.
3. Hutchings I.M. Tribology; Friction and Wear of Engineering Materials (1992), CRC Press, London
4. Zhang S.W. State of the art of polymer tribology. Tribol. Int. 31 (1998) 49-60
5. Mallick P.K. Fiber Reinforced Composites: Materials, Manufacturing and Design. 2nd ed. vol. 18 (1993), Marcel Dekker, Inc., New York
6. Friedrich K., Lu Z., and Hager A.M. Recent advances in polymer composites tribology. Wear 190 (1996) 139-144
7. Viswnath B., Verma A.P., and Kameswara Rao C.V.S. Effect of reinforcement on friction and wear of fabric reinforced polymer composites. Wear 167 (1993) 93-99
8. EI-Sayed A.A., EI-Sherbiny M.J., Abo-EI-Ezz A.S., and Aggag G.A. Friction and wear properties of polymeric composite materials for bearing applications. Wear 184 (1995) 45-53
9. Chang H.W. Correlation of wear with oxidation of carbon-carbon composites. Wear 80 1 (1982) 7-14
10. Lhymn C. Tribological behaviour of unidirectional polyphenylene sulfide carbon fiber reinforced laminate. Wear 116 (1987) 343-359
11. Tripaty B.S., and Furey M.J. Tribological behaviour of unidirectional graphite-epoxy and carbon-PEEK composites. Wear 162-164 (1993) 385-396 Part-1
12. Suresha B., Chandramohan G., Samapathkumaran P., Seetharamu S., and Vynatheya. Friction and wear characteristics of carbon-epoxy and glass-epoxy woven roving fiber composites. J. Reinf. Plast. Compos. 25 (2006) 771-782
13. Briscoe B.J., Pogosion A.K., and Tabor D. The friction and wear of high density polythene: the action of lead oxide and copper oxide fillers. Wear 27 1 (1974) 19-34
14. Bijwe J., Logani C.M., and Tewari U.S. Influence of fillers and fibre reinforcement on abrasive wear resistance of some polymeric composites. Wear 138 1-2 (1990) 72-92
15. Lu Z., Friedrich K., Pannhorst W., and Heinz J. Wear and friction of unidirectional carbon fiber-glass matrix composite against various counterparts. Wear 162-164 (1993) 1103-1110
16. 2 filler on the tribological properties of carbon fiber reinforced nylon 1010 composites. Wear 255 (2003) 774-779
17. Lancaster J.K. The effect of carbon fiber reinforcement on friction and wear of polymers. J. Appl. Phys. 1 (1968) 549-555
18. Tanaka K. Effect of various fillers on the friction and wear of PTFE-based composites. In: Friedrich K. (Ed). Friction and Wear of Polymer Composites 205 (1986), Elsevier, Amsterdam pp. 137-174
19. Bahadur S., Fu Q., and Gong D. The effect of reinforcement and the synergism between CuS and carbon fiber on the wear of nylon. Wear 178 (1994) 123-130
20. Suresha B., Chandramohan G., Prakash J.N., Balusamy V., and Sankaranarayanasamy K. The role of fillers on friction and slide wear characteristics in glass-epoxy composite systems. J. Miner. Mater. Charact. Eng. 5 (2006) 87-101
21. Suresha B., Chandramohan G., Sadananda Rao P.R., Samapathkumaran P., and Seetharamu S. Friction and wear characteristics of carbon-epoxy and glass-epoxy woven roving fiber composites. J. Reinf. Plast. Compos. 25 (2007) 771-782
22. Chand N., and Gautam K.K.S. Influence of load on abrasion fly-ash glass fiber reinforced composites. J. Mater. Sci. Lett. 13 (1994) 230-233
23. Srivastava V.K., and Pathak J.P. Friction and wear properties of bushing bearing of graphite filled short glass fiber composite in dry sliding. Wear 197 (1996) 145-150
24. Bloom P.D., Baikerikar K.G., Anderegg J.W., and Sheares V.V. Fabrication and wear resistance of Al-Cu-Fe quasicrystal-epoxy composite materials. Mater. Eng. A 360 (2003) 46-57
25. Schwartz C.J., and Bahadur S. The role of filler deformability, filler-polymer bending, and counterface material on the tribological behaviour of polyphenylene sulfide. Wear 251 (2001) 1532-1540
26. Xian G., and Zhang Z. Effects of the combination of solid lubricants and short carbon fibers on the sliding performance of poly(ether imide) matrix composites. J. Appl. Polym. Sci. 94 (2004) 1428-1434
27. Tewari U.S., and Bijwe J. In advances in composites technology. In: Friedrich K. (Ed). Composite Materials Series 8 (1993), Elsevier, Amsterdam p.159
28. Kishore, Sampathkumaran P., Seetharamu S., Vynatheya S., Murali A., and Kumar R.K. SEM observations of the effects of velocity and load on the sliding wear characteristics of glass fabric-epoxy composites with different fillers. Wear 237 (2000) 20-27
29. Suresha B., Chandramohan G., Renukappa M.N., and Siddaramaiah. Mechanical and tribological properties of glass-epoxy composites with and without graphite. J. Appl. Polym. Sci. 103 (2007) 2472-2480
30. Harsha A.P., and Tewari U.S. Tribo performance of polyaryletherketone composites. Polym. Test 21 (2002) 697-702
31. Suresha B., Chandramohan G., Siddaramaiah P., Sampathkumaran S., and Seetharamu. Three-body abrasive wear behaviour of carbon and glass fiber reinforced epoxy composites. Mater. Sci. Eng. A 443 (2007) 285-292
32. Cirino M., Pipes R.B., and Friedrich K. Evaluation of polymer composites for sliding and abrasive wear applications. Composites 19 (1988) 383-392
33. Cirino M., Friedrich K., and Pipes R.B. The abrasive wear behaviour of continuous fiber polymer composites. J. Mater. Sci. 22 (1987) 235-247
34. Lhymn C., Tempelmeyer K.E., and Davis P.K. The abrasive wear of short fiber composites. Composites 16 (1985) 127-136
35. Friedrich K. In: Friedrich K., and Pipes R.B. (Eds). Advances in Composite technology vol. 8 (1993), Elsevier, Netherlands pp. 209-276, Chapter 6.
36. Mody P.B., Chou T.W., and Friedrich K. Effect of testing conditions and microstructure on the sliding wear of graphite fiber/PEEK matrix composites. J. Mater. Sci. 23 (1988) 4319-4330
37. 2 in epoxy composites. Wear 257 3-4 (2004) 279-283
38. Kishore P., Sampathkumaran S., Seetharamu P., Thomas M., and Janardhana. A study on the effect of the type and content of filler in epoxy-glass composite system on the friction and slide wear characteristics. Wear 259 (2005) 634-664
39. Zum Gahr K.H. Microstructure and Wear of Materials, Tribology Series vol. 10 (1987), Elsevier, Amsterdam
40. Bahadur S. The development of transfer layers and their role in polymer tribology. Wear 245 1-2 (2000) 92-99
41. Bahadur S., and Gong D.L. The role of copper compounds as fillers in the transfer and wear behaviour of polyetheretherketone. Wear 154 1 (1992) 151-165
42. Suh N.P., and Saka N. Fundamentals of Tribology (1980), MIT Press, Massachussets p. 733
43. Lancaster J.K. Polymer based bearing materials; the role of fillers and fiber reinforcement. Tribology 5 4 (1972) 249-255
44. Lancaster J.K. Friction and wear in polymer science. In: Jenkins A.D. (Ed). A Materials Science Hand Book (1972), North Holland, Amsterdam