Punching tests of slabs with low reinforcement ratios

ACI Structural Journal

Volumn 106, Issue 1, 2009, Pages 87-95

  Guandalini, Stefano ^a   Burdet, Olivier L ^a   Muttoni, Aurelio ^a  

^a EPFL   (Switzerland)

Author keywords

Aggregate size; Critical shear crack theory; Punching shear; Reinforcement ratio; Size effect

Indexed keywords

AGGREGATE SIZE; CRITICAL SHEAR CRACK THEORY; PUNCHING SHEAR; REINFORCEMENT RATIO; SIZE EFFECT;

COLUMNS (STRUCTURAL); CRACKS; PUNCHING; TESTING;

REINFORCEMENT;

EID: 68349090244     PISSN: 08893241     EISSN: None     Source Type: Journal    
DOI: None     Document Type: Article

References (21)

1. Elstner, R. C, and Hognestad, E.,"Shearing Strength of Reinforced Concrete Slabs," ACI JOURNAL, Proceedings V. 53, No. 2, Feb. 1956, pp. 29-58.
2. Kinnunen, S., and Nylander, H.,"Punching of Concrete Slabs without Shear Reinforcement," No. 158, Transactions of the Royal Institute of Technology, Stockholm, Sweden, 1960, 112 pp.
3. Moe, J.,"Shearing Strength of Reinforced Concrete Slabs and Footings under Concentrated Loads," Bulletin D47, Portland Cement Association, Skokie, IL, 1961, 144 pp.
4. Silfwerbrand, J., and Hassanzadeh, G., eds., International Workshop on Punching Shear Capacity of RC Slabs, Royal Institute of Technology, Stockholm, Sweden, 2000, 527 pp.
5. fib,"Punching of Structural Concrete Slabs," fib Bulletin 12, Lausanne, Switzerland, 2001, 307 pp.
6. Polak, M. A., ed., Punching Shear in Reinforced Concrete Slabs, SP-232, American Concrete Institute, Farmington Hills, MI, 2005, 302 pp.
7. ACI Committee 318,"Building Code Requirements for Structural Concrete (ACI 318-08) and Commentary," American Concrete Institute, Farmington Hills, MI, 2005, 465 pp.
8. CEN, "Eurocode 2-Design of Concrete Structures: Part 1-1-General Rules and Rules for Buildings," EN 1992-1-1, Brussels, Belgium, 2004, 225 pp.
9. Muttoni, A.,"Punching Shear Strength of Reinforced Concrete Slabs without Transverse Reinforcement," ACI Structural Journal, V. 105, No. 4, July-Aug. 2008, pp. 440-450.
10. Stein, T.; Ghali, A.; and Dilger, W. H.,"Distinction between Punching and Flexural Failure Modes of Flat Plates," ACI Structural Journal, V. 104, No. 3, May-June 2007, pp. 357-365.
11. Muttoni, A., and Schwartz, J., Behavior of Beams and Punching in Slabs without Shear Reinforcement, V. 62, IABSE Colloquium, Stuttgart, Germany, 1991, pp. 703-708.
12. Muttoni A.,"Shear and Punching Strength of Slabs without Shear Reinforcement," Beton-und Stahlbetonbau, V. 98, No. 2, Berlin, Germany, 2003, pp. 74-84. (in German)
13. Guandalini, S., and Muttoni, A.,"Symmetrical Punching Tests on Slabs without Transverse Reinforcement," Test Report, École Polytechnique Fédérale de Lausanne, Lausanne, Switzerland, 2004, 85 pp. (in French)
14. Guandalini, S.,"Symmetric Punching of Reinforced Concrete Slabs," doctoral thesis, École Polytechnique Fédérale de Lausanne, Lausanne, Switzerland, 2005, 289 pp. (in French)
15. Guidotti, R.; Fernández Ruiz, M.; and Muttoni, A.."Influence of Axial Load on the Punching Strength of Reinforced Concrete Slabs," Test Report, École Polytechnique Fédérale de Lausanne, Switzerland, 2007, 64 pp. (in French)
16. Tolf, P.,"Influence of the Slab Thickness on the Strength of Concrete Slabs at Punching-Tests With Circular Slabs," Bulletin 146, Royal Institute of Technology, Department of Structural Mechanics and Engineering, Stockholm, Sweden, 1988, 64 pp. (in Swedish)
17. Hallgren, M.,"Punching Shear Capacity of Reinforced High Strength Concrete Slabs," doctoral thesis, KTH Stockholm, Stockholm, Sweden, 1996.
18. Nylander, H., and Sundquist, H.,"Punching of Bridge Slabs with Non-Prestressed Reinforcement on Columns," Test Report KTH, No. 104, Stockholm, Sweden, 1972, 64 pp. (in Swedish)
19. Kinnunen, S.; Nylander, H.; and Tolf, P.,"Plattjocklekens Inverkan Pa Betongplattors Hallfasthet Vid Genomstansning. Försök Med Rektangulära Plattor," Test Report KTH, No. 137, Stockholm, Sweden, 1980, 73 pp. (in Swedish)
20. Ramdane, K.-E.,"Punching Shear of High Performance Concrete Slabs," Proceedings of the Fourth International Symposium on Utilization of High-Strength/High Performance Concrete, V. 3, Paris, France, 1996, pp. 1015-1026.
21. Hassanzadeh, G., and Farhang, A.."Strengthening of Bridge Slabs with Respect to Punching," master's Thesis, KTH, Stockholm, Sweden, 1995, 134 pp. (in Swedish)