Effect of polymers on aggregation of cellulose fibrils and its implication on strength development in wet paper web

Nordic Pulp and Paper Research Journal

Volumn 24, Issue 2, 2009, Pages 125-134

  Myllytie, Petri ^a   Holappa, Susanna ^a   Paltakari, Jouni ^a   Laine, Janne ^a  

^a AALTO UNIVERSITY   (Finland)

Author keywords

Cellulose microfibrils; Composites; Dry strength; Fiber bonding; Polymers; Wet web strength

Indexed keywords

ADDITIVES; CELLULOSE; CELLULOSE DERIVATIVES; CHEMICAL BONDS; COMPOSITE MATERIALS; FIBER BONDING; MOISTURE CONTROL; POLYMERS; TENSILE STRENGTH; TENSILE TESTING;

ADSORPTION CONDITIONS; AGGREGATION BEHAVIOR; CELLULOSE MICROFIBRILS; DRY STRENGTHS; SPECIFIC INTERACTION; STRENGTH ADDITIVES; STRENGTH DEVELOPMENT; WET WEB STRENGTH;

INFRARED DRYING;

ADSORPTION; AGGLOMERATION; AMINES; BONDING; CELLULOSE; CELLULOSE DERIVATIVES; COMPOSITES; CURING; DRAINAGE; DRYING; FIBERS; FIBRILS; INFRARED RADIATION; MOISTURE CONTROL; POLYMERS; TENSILE STRENGTH;

EID: 68049129705     PISSN: 02832631     EISSN: None     Source Type: Journal    
DOI: 10.3183/npprj-2009-24-02-p125-134     Document Type: Article

References (33)

1. Alince, B., Vanerek, A., de Oliveira, M.H. and van de Ven, T.G.M. (2006): The effect of polyelectrolytes on the wet-web strength of paper, Nord. Pulp Paper Res. J. 21(5), 653.
2. Allan, G.G., Fox, J.R., Crosby, G.D. and Sarkanen, K.V. (1978): Chitosan, a mediator for fiber-water interactions in paper, In Fibre-Water Interactions in Papermaking, Transactions of the 6th Fundamental Research Symposium, Oxford, UK, pp. 765-793.
3. Antal, M., Laleg, M. and Pikulik, I.I. (2000): Papermaking additive with primary amino groups and mechanical pulp treated therewith, PCT int.appl. 2000-CA6; 99-114871,30.
4. Azizi Samir, M.A.S., Alloin, F. and Dufresne, A. (2005): Review of recent research into cellulosic whiskers, their properties and their application in nanocompo-site field, Biomacromolecules, 6(2), 612.
5. Azizi Samir, MAS, Alloin, F., Paillet, M. and Dufresne, A. (2004): Tangling effect in fibrillated cellulose reinforced nanocomposites, Macromolecules, 37(11), 4313. Balodis, V., McKenzie, A.W., Harrington, K.J. and Higgins, H.G. (1966): Effects of hydrophilic colloids and other nonfibrous materials on fiber flocculation and network consolidation, In: Bolam, F. (ed.), Consolidation of the Paper Web, Transactions of the 3rd Fundamental Research Symposium, Cambridge, UK, pp. 639-686.
6. Berglund, L. (2005): Cellulose-based nanocomposites, In: Mohanty, A.K. et al. (ed.), Natural fibers, biopolymers, and biocomposites, CRC Press, Boca Raton, Florida, pp. 807-832.
7. Billosta, V., Brändström, J., Cochaux, A., Joseleau, J. and Ruel, K. (2006): Ultrastructural organisation of the wood cell wall can explain modifications caused in fibers during the pulping process, Cellulose Chem. Technol. 40(3-4), 223. Blomstedt, M., Kontturi, E. and Vuorinen, T. (2007): Optimising CMC sorption in order to improve tensile stiffness of hardwood pulp sheets, Nord. Pulp Paper Res. J. 22(3), 336.
8. DuBois, M Gilles, K.A., Hamilton, J.K., Rebers, P.A. and Smith, F. (1956): Colorimetric method for determination of sugars and related substances, Anal.Chem. 28(3), 350.
9. Duchesne, I. and Daniel, G. (2000): Changes in surface ultrastructure of noway spruce fibers during kraft pulping - visualization by field emission-SEM, Nord. Pulp Paper Res. J. 15(1), 54.
10. Eichhorn, S.J., Baillie, C.A., Zafeiropoulos, N., Mwaikambo, L.Y., Ansell, M.P., Dufresne, A., Entwistle, K.M., Herrera-Franco, P.J., Escamilla, G.C., Groom, L, Hughes, M Hill, C, Rials, T.G. and Wild, P.M. (2001): Current international research into cellulosic fibers and composites, J. Mater. Sci. 36(9), 2107. Emerton, H.W. (1957): The outer secondary wall of tracheids and fibers: Its papermaking significance and its structure, Tappi, 40(7), 542. Eriksson, M. (2006): The influence of molecular adhesion on paper strength, Ph.D. thesis, Department of Fibre and Polymer Technology, Royal Institute of Technology, Stockholm, Sweden.
11. Herrick, F.W., Casebier, R.L., Hamilton, J.K. and Sandberg, K.R. (1983): Microfibrillated cellulose: Morphology and accessibility, J. Appl. Polym. Sci.: Appl. Polym. Symp. 37,797.
12. Higgins, H.G., Goldsmith, V. and Harrington, K.J. (1955): The structure and properties of paper. IV. drying tensions and dimensional changes in eucalypt kraft paper, Aust. J. Appl. Sci. 6,496.
13. Higgins, H.G. and McKenzie, A.W. (1963): The structure and properties of paper. XIV. effects of drying cellulose fibers and the problem of maintaining pulp strength, Appita, 16(6), 145.
14. Higgins, H.G., McKenzie, A.W. and Harrington, K.J. (1958): The structure and properties of paper. VII. study of the mechanisms of beating and interfiber bonding by means of esterification, Tappi, 41 (5), 193. Hult, E-L, Larsson, P.T. and Iversen, T. (2001): Cellulose fibril aggregation - an inherent property of kraft pulps, Polymer, 42,3309. Ingmanson, W.L. and Andrews, B.D. (1959): The effect of beating on filtration resistance and its components of specific surface and specific volume, Tappi, 42(1), 29.
15. Jayme, G. and Hunger, G. (1958): Rearrangement of microfibrils in dried cellulose and the implication of this structure alteration on pulp properties, In: Bolam, F. (ed.), Fundamentals of Papermaking Fibres, Transactions of the Symposium held at Cambridge, Surrey, UK, pp. 263-271.
16. Jokinen, H.M., Niinimäki, J. and Ämmälä, A.J. (2006): The effect of an anionic polymer additive on fractionation of paper pulp, Appita J. 59(6), 459. Joy, D.C. and Joy, C.S. (2006): Scanning electron microscope imaging in liquids - some data on electron interactions in water, J. Microsc. 221 (2), 84. Katz, S., Beatson, R.P. and Scallan, A.M. (1984): The determination of strong and weak acidic groups in sulfite pulps, Svensk papperstidning, 87(6), R48. Kibblewhite, R.P. (1973): Effects of beating on wet web behavior, Appita, 26(5), 341. Laine, J., Lindstrom, T., Glad Nordmark, G. and Risinger, G. (2002): Studies on topochemical modification of cellulosic fibres part 2. The effect of carboxymethyl cellulose attachment on fibre swelling and paper strength, Nord. Pulp Paper Res. J. 17(1), 50.
17. Laine, J., Lindström, T Glad Nordmark, G. and Risinger, G. (2000): Studies on topochemical modification of cellulosic fibers part 1. Chemical conditions for the attachment of carboxymethyl cellulose onto fibers, Nord. Pulp Paper Res. J. 15(5), 520.
18. Laleg, M. and Pikulik, I.I. (1992): Strengthening of mechanical pulp webs by chitosan, Nord. Pulp Paper Res. J. 7(4), 174.
19. Laleg, M. and Pikulik I.I. (1991): Wet-web strength increase by chitosan, Nord. Pulp Paper Res. J. 6(3), 99.
20. Lertsutthiwong, P., Chandrkrachang, S., Nazhad, M.M. and Stevens, W.F. (2002): Chitosan as a dry strength agent for paper, Appita, 55(3), 208. Lyne, L.M. and Gallay, W. (1954): Fiber properties and fiber water relationships in relation to the strength and rheology of wet webs, Tappi, 37(12), 581. Malainine, M.E., Mahrouz, M. and Dufresne, A. (2005): Thermoplastic nanocomposites based on cellulose microfibrils from Opuntia ficus-indica parenchyma cell, Comp. Sci. Tech. 65,1520.
21. McKenzie, A. W. (1957): The structure and properties of paper. VI. the effect of swelling pretreatments on interfiber bonding capacity, Aust. J. Appl. Sci. 8,35. McKenzie, A.W. and Higgins, H.G. (1960): The structure and properties of paper. XII. origin of the differences in strength between papers made from sulfate and sulfite pulps, Appita, 14(3), 127.
22. McKenzie, A.W. and Higgins, H.G. (1955): The structure and properties of paper. III. significance of swelling and hydrogen bonding in interfiber adhesion. Aust. J. Appl. Sci. 6,208.
23. McKenzie, A.W. (1984): The structure and properties of paper, part XXI: The diffusion theory of adhesion applied to interfiber bonding, Appita, 37(7), 580. Mesic, N. (2002): Effects of some chemical additives on the delamination and physical properties of impulse-pressed paper sheet, Licentiate thesis, Department of Fibre and Polymer Technology, Royal Institute of Technology, Stockholm, Sweden.
24. Mitikka-Eklund, M., Halttunen, M., Melander, M., Ruuttunen, K. and Vuorinen, T. (1999): Fibre engineering, 10th International symposium on wood and pulping chemistry, Yokohama, Japan, pp. 432-439. Paasonen, P. K. (1968): Wet web strength of chemical pulp, Paperi Puu 50(11), 655. Pelton, R. (1993): A model of the external surface of wood pulp fibers, Nord. Pulp Paper Res. J. 8(1), 113.
25. Pelton, R., Zhang, J., Wågberg, L. and Rundlöf, M. (2000): The role of surface polymer compatibility in the formation of fiber/fiber bonds in paper, Nord. Pulp Paper Res. J. 15(5), 400.
26. Pääkko, M., Ankerfors, M., Kosonen, H., Nykänen, A., Ahola, S., Österberg, M., Ruokolainen, J., Laine, J., Larsson, P.T., Ikkala, 0. and Lindström, T. (2007): Enzymatic hydrolysis combined with mechanical shearing and high-pressure homogenisation for nanoscale cellulose fibrils and strong gels, Biomacromolecules, 8(6), 1934.
27. Svagan, A.J., Azizi Samir, M.A.S. and Berglund, LA. (2007): Biomimetic polysaccharide nanocomposites of high cellulose content and high toughness, Biomacromolecules, 8(8), 2556.
28. Swerin, A. and Wågberg, L. (1994): Size exclusion chromatography for characterization of cationic polyelectrolytes used in papermaking, Nord. Pulp Paper Res. J. 9(1), 18.
29. Swerin, A., Ödberg, L. and Lindström, T. (1990): Deswelling of hardwood kraft pulp fibers by cationic polymers. The effect on wet pressing and sheet properties, Nord. Pulp Paper Res. J. 5(4), 188.
30. Tatsumi, D. and Yamauchi, T. (1997): Depth profile of paper additives within a pulp fibre, In: Baker, C.F. (ed.), Fundamentals of Papermaking Materials, Transactions of the 11th Fundamental Research Symposium, Cambridge, UK, pp. 789-814.
31. Thiberge, S., Zik, 0. and Moses, E. (2004): An apparatus for imaging liquids, cells, and other wet samples in the scanning electron microscopy, Rev. Sci. Instrum. 75(7), 2280.
32. Thode, E.F. and Ingmanson, W.L. (1959): Factors contributing to the strength of a sheet of paper. I. external specific surface and swollen specific volume, Tappi, 42(1), 74.
33. Van den Akker, J.A. (1959): Structural aspects of bonding, Tappi, 42(12), 940. Wang, X., Maloney, T.C. and Paulapuro, H. (2007): Fibre fibrillation and its impact on sheet properties, Paperi Puu, 89(3), 148. Yano, H. and Nakahara, S. (2004): Bio-composites produced from plant micro-fiber bundles with a nanometer unit web-like network, J. Mater. Sci. 39(5), 1635.