Splitting tensile strength of fly ash activated by hydrothermal hot-pressing process

Journal of Materials in Civil Engineering

Volumn 21, Issue 8, 2009, Pages 356-361

  Sun, Peijiang ^a   Wu, Hwai Chung ^a  

^a Wayne State University   (United States)

Author keywords

Alkalinity; Chemicals; Fly ash; Temperature effects; Tensile strength

Indexed keywords

ALKALINE SOLUTIONS; CHEMICAL ACTIVATORS; CLASS-F; CONSTRUCTION MATERIALS; HOT-PRESSING PROCESS; HYDROTHERMAL HOT PRESSINGS; HYDROTHERMAL REACTION; INNOVATIVE PROCESS; KEY PARAMETERS; MODERATE TEMPERATURE; SPLITTING TENSILE STRENGTH; SYNERGISTIC EFFECT; TEMPERATURE EFFECTS; TREATMENT TEMPERATURE;

ALKALINITY; CHEMICAL ACTIVATION; FLY ASH; HOT PRESSING; MECHANICAL PROPERTIES; PH EFFECTS; STRENGTH OF MATERIALS; TEMPERATURE; THERMAL EFFECTS;

TENSILE STRENGTH;

ALKALINITY; FLY ASH; REACTIVATION; RECYCLING; SOLIDIFICATION; SYNERGISM; TEMPERATURE EFFECT; TENSILE STRENGTH;

EID: 68049104175     PISSN: 08991561     EISSN: None     Source Type: Journal    
DOI: 10.1061/(ASCE)0899-1561(2009)21:8(356)     Document Type: Article

References (21)

1. ASTM. (2003). "Standard specification for coal fly ash and raw or calcined natural pozzolan for use as a mineral admixture in concrete." ASTM C618-03, West Conshohocken, Pa.
2. Jiang, W., and Roy, D. M. (1992). "Hydrothermal processing of new fly ash cement." Am. Ceram. Soc. Bull. ACSBA70002-7812, 71, 642-647.
3. Joshi, R. C., and Lohtia, R. P. (1997). "Chapter 2: Types and properties of fly ash." Fly ash in concrete: Production, properties and uses, Gordon Breach, New York, 15-50.
4. Jueshi, Q., Caijun, S., and Zhi, W. (2001). "Activation of blended cements containing fly ash." Cem. Concr. Res. CCNRAI0008-8846, 31, 1121-1127. 10.1016/S0008-8846(01)00526-9
5. Katz, A. (1998). "Microscopic study of alkali-activated fly ash." Cem. Concr. Res. CCNRAI0008-8846, 28, 197-208. 10.1016/ S0008-8846(97)00271-8
6. Li, D., and Chen, Y. (2000). "The influence of alkalinity on activation and microstructure of fly ash." Cem. Concr. Res. CCNRAI0008-8846, 30, 881-886. 10.1016/S0008-8846(00)00252-0
7. 2 O." Cem. Concr. Res. CCNRAI0008-8846, 27, 1237-1248. 10.1016/ S0008-8846(97)00116-6
8. Nakane, Y., Sato, K., Takahashi, H., Yamasaki, N., and Hashida, T. (1994). "Development of solidification technique for recycle of concrete wastes by hydrothermal hot-pressing and its mechanical property." J. Ceram. Soc. Jpn. JCSJEW0914-5400, 102(4), 405-407.
9. Palomo, A. (1999). "Alkali-activated fly ashes, a cement for the future." Cem. Concr. Res. CCNRAI0008-8846, 29, 1323-1329. 10.1016/ S0008-8846(98)00243-9
10. Paya, J., Monzo, J., Borrachero, M. V., and Peris-Mora, E. (1995). "Mechanical treatment of fly ash. Part 1: Physico-chemical characterization of ground fly ash." Cem. Concr. Res. CCNRAI0008-8846, 25, 1469-1479. 10.1016/0008-8846(95)00141-X
11. Paya, J., Monzo, J., Borrachero, M. V., and Peris-Mora, E. (1996). "Mechanical treatment of fly ash. Part 2: Particle morphologies in ground fly ashes (GFA) and workability of GFA-cement mortars." Cem. Concr. Res. CCNRAI0008-8846, 26, 225-235. 10.1016/0008-8846(95)00212-X
12. Paya, J., Monzo, J., Borrachero, M. V., and Peris-Mora, E. (1997). "Mechanical treatment of fly ash. Part 3: Studies on strength development of ground fly ashes (GFA)-cement mortars." Cem. Concr. Res. CCNRAI0008-8846, 27, 1365-1377. 10.1016/S0008-8846(97)00129-4
13. Paya, J., Monzo, J., Borrachero, M. V., and Peris-Mora, E. (2000). "Mechanical treatment of fly ash. Part 4: Strength development of ground fly ash-cement mortars cured at different temperatures." Cem. Concr. Res. CCNRAI0008-8846, 30, 543-551. 10.1016/ S0008-8846(00)00218-0
14. 4)." Cem. Concr. Res. CCNRAI0008-8846, 31, 873-881. 10.1016/ S0008-8846(01)00478-1
15. Puertus, F. (2000). "Alkali-activated fly ash/slag cement strength behavior and hydration products." Cem. Concr. Res. CCNRAI0008-8846, 30, 1625-1632. 10.1016/S0008-8846(00)00298-2
16. Sekulic, Z., Popov, S., Duricic, M., and Rosic, A. (1999). "Mechanical activation of cement with addition of fly ash." Mater. Lett. MLETDJ0167-577X, 39, 115-121. 10.1016/S0167-577X(98)00226-2
17. Shi, C. (1996). "Early microstructure development of activated lime-fly ash pastes." Cem. Concr. Res. CCNRAI0008-8846, 26, 1351-1359. 10.1016/0008-8846(96)00123-8
18. Shi, C., and Day, R. L. (1995). "Activation of the reactivity of fly ash by chemical activation." Cem. Concr. Res. CCNRAI0008-8846, 25, 15-21. 10.1016/0008-8846(94)00107-A
19. Shi, C., and Day, R. L. (2001). "Comparison of different methods for enhancing reactivity of pozzolans." Cem. Concr. Res. CCNRAI0008-8846, 31, 813-818. 10.1016/S0008-8846(01)00481-1
20. Wu, H. C., and Sun, P. (2003). "High performance masonry units from 100% fly ash: Synergistic approach" Technical Rep. Prepared for Advanced Infrastructure Materials Laboratory, Wayne State Univ., Detroit.
21. Xie, Z., and Xi, Y. (2001). "Hardening mechanisms of an alkaline-activated Class F fly ash." Cem. Concr. Res. CCNRAI0008-8846, 31, 1245-1249. 10.1016/S0008-8846(01)00571-3