A practical iron loss calculation for AC filter inductors used in PWM inverters

IEEE Transactions on Industrial Electronics

Volumn 56, Issue 7, 2009, Pages 2600-2609

  Shimizu, Toshihisa ^a   Iyasu, Seiji ^b  

^a TOKYO METROPOLITAN UNIVERSITY   (Japan)

^b Denso Ltd   (Japan)

Author keywords

AC filter inductor loss; Pulsewidth modulation (PWM) inverters

Indexed keywords

AC FILTER INDUCTOR LOSS; AC FILTERS; CONVENTIONAL CIRCUITS; DC CHOPPERS; H-PLANE; INDUCTOR LOSS; IRON LOSS; MAP METHODS; MINOR LOOP; MODULATION METHODS; PRACTICAL PROCEDURES; PULSEWIDTH-MODULATION (PWM) INVERTERS; PWM INVERTER;

CHOPPERS (CIRCUITS); CIRCUIT SIMULATION; CONVERSION EFFICIENCY; PULSE MODULATION; PULSE WIDTH MODULATION;

COUNTING CIRCUITS;

EID: 67651151555     PISSN: 02780046     EISSN: None     Source Type: Journal    
DOI: 10.1109/TIE.2009.2018436     Document Type: Article

References (24)

1. A. Boglietti, P. Ferraris, M. Lazzari, and F. Profumo, "Effects of different modulation index on the iron losses in soft magnetic materials supplied by PWM inverter," IEEE Trans. Magn., vol. 29, no. 6, pp. 3234-3236, Nov. 1993.
2. A. Boglietti, P. Ferraris, M. Lazzari, and M. Pastorelli, "Influence of modulation techniques on iron losses with single phase DC/AC converters," IEEE Trans. Magn., vol. 32, no. 5, pp. 4884-4886, Sep. 1996.
3. A. J. Moses and N. Tutkun, "Investigation of power loss in wound toroidal cores under PWM excitation," IEEE Trans. Magn., vol. 33, no. 5, pp. 3763-3765, Sep. 1997.
4. A. Boglietti, P. Ferraris, M. Lazzari, and M. Pastorelli, "About the possibility of defining a standard method for iron loss measurement in soft magnetic materials with inverter supply," IEEE Trans. Ind. Appl., vol. 33, no. 5, pp. 1283-1288, Sep./Oct. 1997.
5. C. Simao, N. Sadowski, N. J. Batistela, and J. P. A. Bastos, "Analysis of magnetic hysteresis loops under sinusoidal and PWM voltage waveforms," in Conf. Rec. IEEE PESC, 2005, pp. 1555-1559.
6. A. I. Maswood and Z. K. Yoong, "Design aspects of a switch-mode transformer under wide input voltage variation," IEEE Trans. Ind. Electron., vol. 53, no. 3, pp. 752-758, Jun. 2006.
7. S. D. Wee, M. H. Shin, and D. S. Hyun, "Stator-flux-oriented control of induction motor considering iron loss," IEEE Trans. Ind. Electron. vol. 48, no. 3, pp. 602-608, Jun. 2001.
8. M. Hasegawa, S. Furutani, S. Doki, and S. Okuma, "Robust vector control of induction motors using full-order observer in consideration of core loss," IEEE Trans. Ind. Electron., vol. 50, no. 5, pp. 912-919, Oct. 2003.
9. M. Amar and R. Kaczmarek, "A general formula for prediction of iron losses under non sinusoidal voltage waveform," IEEE Trans. Magn., vol. 31, no. 5, pp. 2504-2509, Sep. 1995.
10. Y. Chen and P. Pillay, "An improved formula for lamination core loss calculation in machines operating with high frequency and high density excitation," in Conf. Rec. IEEE IAS Annu. Meeting, 2002, pp. 759-766.
11. A. Van den Bossche, V. C. Valchev, and G. B. Georgiev, "Measurement and loss model of ferrites with non-sinusoidal waveforms," in Conf. Rec. IEEE PESC, 2004, pp. 4814-4818.
12. W. A. Roshen, "A practical, accurate and very general core loss model for nonsinusoidal waveforms," IEEE Trans. Power Electron., vol. 22, no. 1, pp. 30-40, Jan. 2007.
13. M. Namikawa, H. Ninomiya, Y. Tanaka, and Y. Takada, "Magnetic properties of 6.5% silicon steel sheets under PWM voltage excitation," IEEE Trans. Magn., vol. 34, no. 4, pp. 1183-1185, Jul. 1998.
14. W. K. Mo, D. K. W. Cheng, and Y. S. Lee, "Simple approximations of the DC flux influence on the core loss power electronic ferrites and their use in design of magnetic components," IEEE Trans. Ind. Electron. vol. 44, no. 6, pp. 788-799, Dec. 1997.
15. P. Tenant and J. J. Rousseau, "Dynamic model of magnetic materials applied on soft ferrites," IEEE Trans. Power Electron., vol. 13, no. 2, pp. 372-379, Mar. 1998.
16. M. S. Lancarotte, C. Goldemberg, and A. Penteado, "Estimation of FeSi core losses under PWM or DC bias ripple voltage excitations," IEEE Trans. Energy Convers., vol. 20, no. 2, pp. 367-372, Jun. 2005.
17. J. Liu, T. G.Wilson, R. C.Wong, R. Wunderlich, and F. C. Lee, "A method for inductor core loss estimation in power factor correction applications," in Conf. Rec. IEEE APEC, 2002, pp. 439-445.
18. M. Albach, T. Durbaum, and A. Brockmeyer, "Calculating core losses in transformers for arbitrary magnetizing currents - A comparison of different approaches," in Conf. Rec. IEEE PESC, 1996, vol. 2, pp. 23-27.
19. T. Shimizu, K. Mishima, K. Wada, and K. Ishii, "Mitigation of inductor loss based on minor-loop hysteresis characteristics," in Conf. Rec. IEEE INTELEC, 2003, pp. 834-839.
20. S. Iyasu, T. Shimizu, and K. Ishii, "A novel inductor loss calculation method on power converters based on dynamic minor loop," in Conf. Rec. IEEJ IPEC-Niigata, 2005, pp. 2016-2022.
21. S. Iyasu, T. Shimizu, and K. Ishii, "A novel iron loss calculation method on power converters based on dynamic minor loop," in Conf. Rec. EPE, 2005, CD-ROM.
22. V. J. Thottuvelil, T. G. Wilson, and H. A. Owen, "High-frequency measurement techniques for magnetic cores," IEEE Trans. Power Electron., vol. 5, no. 1, pp. 41-53, Jan. 1990.
23. J. Murata, T. Yukawa, and T. Ninomiya, "A power loss measuring technique of ferrite core for switching power supply in its actual operating mode," IEICE Japan, Tech. Rep. 2004-54, pp. 39-46, 2005.
24. Y. Han, W. Eberle, and Y. F. Liu, "A practical copper loss measurement for the planer transistor in high-frequency switching converters," IEEE Trans. Ind. Electron., vol. 54, no. 4, pp. 2276-2287, Aug. 2007.