Hardness and surface roughness of reline and denture base acrylic resins after repeated disinfection procedures

Journal of Prosthetic Dentistry

Volumn 102, Issue 2, 2009, Pages 115-122

  Machado, Ana Lucia ^a   Breeding, Larry C ^b   Vergani, Carlos Eduardo ^a   da Cruz Perez, Luciano Elias ^a  

^a SÃO PAULO STATE UNIVERSITY UNESP   (Brazil)

^b UNIVERSITY OF MISSISSIPPI MEDICAL CENTER   (United States)

Author keywords

[No Author keywords available]

Indexed keywords

ACRYLIC ACID RESIN; BORIC ACID; DISINFECTANT AGENT; DURALINER II; KOOLINER; LUCITONE; PERBORATE SODIUM;

ARTICLE; DENTURE; DISINFECTION; HARDNESS; MATERIALS TESTING; METHODOLOGY; MICROWAVE RADIATION; SURFACE PROPERTY;

ACRYLIC RESINS; BORATES; DENTAL DISINFECTANTS; DENTURE BASES; DENTURE LINERS; DISINFECTION; HARDNESS; MATERIALS TESTING; MICROWAVES; SURFACE PROPERTIES;

EID: 67651027238     PISSN: 00223913     EISSN: None     Source Type: Journal    
DOI: 10.1016/S0022-3913(09)60120-7     Document Type: Article

References (42)

1. Ping Chaing B.K. Polymers in the service of prosthetic dentistry. J Dent 12 (1984) 203-214
2. Haywood J., Basker R.M., Watson C.J., and Wood D.J. A comparison of three hard chairside denture reline materials. Part I. Clinical evaluation. Eur J Prosthodont Restor Dent 11 (2003) 157-163
3. Glass R.T., Bullard J.W., Hadley C.S., Mix E.W., and Conrad R.S. Partial spectrum of microorganisms found in dentures and possible disease implications. J Am Osteopath Assoc 101 (2001) 92-94
4. Jafari A.A., Tafti A.F., Falahzada H., and Yavari M.T. Evaluation of presence and levels of contamination in pumice powder and slurry used in clinical dental laboratories. Middle East J Sci Res 1 (2006) 50-53
5. Barbeau J., Séguin J., Goulet J.P., de Koninck L., Avon S.L., Lalonde B., et al. Reassessing the presence of Candida albicans in denture-related stomatitis. Oral Surg Oral Med Oral Pathol Oral Radiol Endod 95 (2003) 51-59
6. Sumi Y., Miura H., Sunakawa M., Michiwaki Y., and Sakagami N. Colonization of denture plaque by respiratory pathogens in dependent elderly. Gerodontology 19 (2002) 25-29
7. Abelson D.C. Denture plaque and denture cleansers: review of the literature. Gerodontics 1 (1985) 202-206
8. Crawford C.A., Lloyd C.H., Newton J.P., and Yemm R. Denture bleaching: a laboratory simulation of patients' cleaning procedures. J Dent 14 (1986) 258-261
9. Shen C., Javid N.S., and Colaizzi F.A. The effect of glutaraldehyde base disinfectants on denture base resins. J Prosthet Dent 61 (1989) 583-589
10. Asad T., Wattkinson A.C., and Huggett R. The effects of various disinfectant solutions on the surface hardness of an acrylic resin denture base material. Int J Prosthodont 6 (1993) 9-12
11. Pavarina A.C., Pizzolitto A.C., Machado A.L., Vergani C.E., and Giampaolo E.T. An infection control protocol: effectiveness of immersion solutions to reduce the microbial growth on dental prostheses. J Oral Rehabil 30 (2003) 532-536
12. Haywood J., Wood D.J., Gilchrist A., Basker R.M., and Watson C.J. A comparison of three hard chairside denture reline materials. Part II. Changes in colour and hardness following immersion in three commonly used denture cleansers. Eur J Prosthodont Restor Dent 11 (2003) 165-169
13. Rodrigues Garcia R.C., Joane Augusto de Jr. S., Rached R.N., and Del Bel Cury A.A. Effect of denture cleansers on the surface roughness and hardness of a microwave-cured acrylic resin and dental alloys. J Prosthodont 13 (2004) 173-178
14. Devlin H., and Kaushik P. The effect of water absorption on acrylic surface properties. J Prosthodont 14 (2005) 233-238
15. Azevedo A., Machado A.L., Vergani C.E., Giampaolo E.T., Pavarina A.C., and Magnani R. Effect of disinfectants on the hardness and roughness of reline acrylic resins. J Prosthodont 15 (2006) 235-242
16. Paranhos H.F., Silva-Lovato C.H., Souza R.F., Cruz P.C., Freitas K.M., and Peracini A. Effects of mechanical and chemical methods on denture biofilm accumulation. J Oral Rehabil 34 (2007) 606-612
17. Dixon D.L., Breeding L.C., and Faler T.A. Microwave disinfection of denture base materials colonized with Candida albicans. J Prosthet Dent 81 (1999) 207-214
18. Neppelenbroek K.H., Pavarina A.C., Spolidorio D.M., Vergani C.E., Mima E.G., and Machado A.L. Effectiveness of microwave sterilization on three hard chairside reline resins. Int J Prosthodont 16 (2003) 616-620
19. Campanha N.H., Pavarina A.C., Vergani C.E., and Machado A.L. Effect of microwave sterilization and water storage on the Vickers hardness of acrylic resin denture teeth. J Prosthet Dent 93 (2005) 483-487
20. Sartori E.A., Schmidt C.B., Walber L.F., and Shinkai R.S. Effect of microwave disinfection on denture base adaptation and resin surface roughness. Braz Dent J 17 (2006) 195-200
21. Sartori E.A., Schmidt C.B., Mota E.G., Hirakata L.M., and Shinkai R.S. Cumulative effect of disinfection procedures on the microhardness and tridimensional stability of a poly(methyl methacrylate) denture base resin. J Biomed Mater Res B Appl Biomater 86B (2008) 360-364
22. Verran J., and Maryan C.J. Retention of Candida albicans on acrylic resin and silicone of different surface topography. J Prosthet Dent 77 (1997) 535-539
23. Radford D.R., Sweet S.P., Challacombe S.J., and Walter J.D. Adherence of Candida albicans to denture-base materials with different surface finishes. J Dent 26 (1998) 577-583
24. Bollen C.M., Lambrechts P., and Quirynen M. Comparison of surface roughness of oral hard materials to the threshold surface roughness for bacterial plaque retention: a review of the literature. Dent Mater 13 (1997) 258-269
25. th ed. (2006), Elsevier, St. Louis 79
26. Loxley E.C., Liewehr F.R., Buxton T.B., and McPherson III J.C. The effect of various intracanal oxidizing agents on the push-out strength of various perforation repair materials. Oral Surg Oral Med Oral Pathol Oral Radiol Endod 95 (2003) 490-494
27. Weiger R., Kuhn A., and Löst C. Effect of various types of sodium perborate on the pH of bleaching agents. J Endod 19 (1993) 239-241
28. Lamb D.J., Ellis B., and Priestley D. The effects of process variables on levels of residual monomer in autopolymerizing dental acrylic resin. J Dent 11 (1983) 80-88
29. Vallittu P.K., Miettinen V., and Alakuijala P. Residual monomer content and its release into water from denture base materials. Dent Mater 11 (1995) 338-342
30. Vallittu P.K., Ruyter I.E., and Buykuilmaz S. Effect of polymerization temperature and time on the residual monomer content of denture base polymers. Eur J Oral Sci 106 (1998) 588-593
31. Kedjarune U., Charoenworaluk N., and Koontongkaew S. Release of methyl methacrylate from heat-cured and autopolymerized resins: cytotoxicity testing related to residual monomer. Aust Dent J 44 (1999) 25-30
32. Urban V.M., Machado A.L., Oliveira R.V., Vergani C.E., Pavarina A.C., and Cass Q.B. Residual monomer of reline acrylic resins. Effect of water-bath and microwave post-polymerization treatments. Dent Mater 23 (2007) 363-368
33. Frangou M.J., and Polyzois G.L. Effect of microwave polymerisation on indentation creep, recovery and hardness of acrylic denture base materials. Eur J Prosthodont Restor Dent 1 (1993) 111-115
34. Lee S.Y., Lai Y.L., and Hsu T.S. Influence of polymerization conditions on monomer elution and microhardness of autopolymerized polymethyl methacrylate resin. Eur J Oral Sci 110 (2002) 179-183
35. Braun K.O., Mello J.A., Rached R.N., and Del Bel Cury A.A. Surface texture and some properties of acrylic resins submitted to chemical polishing. J Oral Rehabil 30 (2003) 91-98
36. Faltermeier A., Rosentritt M., and Müssig D. Acrylic removable appliances: comparative evaluation of different postpolymerization methods. Am J Orthod Dentofacial Orthop 131 (2007) 301.e16-301.e22
37. Yatabe M., Seki H., Shirasu N., and Sone M. Effect of the reducing agent on the oxygen-inhibited layer of the cross-linked reline material. J Oral Rehabil 28 (2001) 180-185
38. International Standards Organization. ISO 1567:1999/Amd 1:2003. Dentistry-denture base polymers. Amendment. Available at: http://www.iso.ch/iso/en/prods-services/ISOstore/store.html Accessed on May 8, 2009.
39. Low I.M. Effects of load and time on the hardness of a viscoelastic polymer. Mater Res Bull 33 (1998) 1753-1758
40. Polyzois G.L., Zissis A.J., and Yannikakis S.A. The effect of glutaraldehyde and microwave disinfection on some properties of acrylic denture resin. Int J Prosthodont 8 (1995) 150-154
41. Lai C.P., Tsai M.H., Chen M., Chang H.S., and Tay H.H. Morphology and properties of denture acrylic resins cured by microwave energy and conventional water bath. Dent Mater 20 (2004) 133-141
42. Ma T., Johnson G.H., and Gordon G.E. Effects of chemical disinfectants on the surface characteristics and color of denture resins. J Prosthet Dent 77 (1997) 197-204