Formability analysis of diode-laser-welded tailored blanks of advanced high-strength steel sheets

Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science

Volumn 40, Issue 8, 2009, Pages 1955-1967

  Panda, S K ^a   Baltazar Hernandez, V H ^a   Kuntz, M L ^a   Zhou, Y ^a  

^a UNIVERSITY OF WATERLOO   (Canada)

Author keywords

[No Author keywords available]

Indexed keywords

AUTOMOTIVE COMPONENT; DIODE LASERS; DUAL-PHASE STEEL; EXPERIMENTAL DATA; FINITE ELEMENTS; FORMABILITY ANALYSIS; FRACTURE LOCATION; HIGH STRENGTH LOW ALLOYS; HIGH-STRENGTH; HIGH-STRENGTH STEEL SHEET; HIGH-STRENGTH STEELS; LIVERMORE SOFTWARE TECHNOLOGY CORPORATIONS; LOAD-BEARING CAPACITY; LS-DYNA; NON-DIMENSIONAL PARAMETERS; NON-UNIFORM DEFORMATION; PARENT METAL; STRAIN DISTRIBUTIONS; STRENGTH RATIOS; STRETCH-FORMING; STRUCTURAL IMPROVEMENTS; TAILOR-WELDED BLANKS; TAILORED BLANK; WEIGHT REDUCTION; WELD LINES; WELD ZONE PROPERTIES; WELDING PARAMETERS; WELDMENTS;

COMPUTER SOFTWARE; DEFORMATION; DOMES; LASER BEAM WELDING; LASERS; STEEL; STEEL SHEET; TENSILE STRENGTH; WELDING MACHINES; WELDS;

WELDING;

EID: 67651001595     PISSN: 10735623     EISSN: None     Source Type: Journal    
DOI: 10.1007/s11661-009-9875-4     Document Type: Article

References (32)

1. Advanced High Strength Steel Application Guidelines, version 4, World Auto Steel, March 2009, www.worldautosteel.org.
2. Auto/Steel Partnership: Tailor Welded Blank Design and Manufacturing Manual, Technical Report, 1995.
3. B. Kinsey, Z. Liu, and J. Cao: J. Mater. Process. Technol., 2000, vol. 99, pp. 145-53.
4. C.H. Cheng, M. Jie, C.L. Chan, and C.L. Chow: Int. J. Mech. Sci., 2007, vol. 49, pp. 217-29.
5. N. Sreenivasan, M. Xia, S. Lawson, and Y. Zhou: J. Eng. Mater. Technol. (Trans. ASME), 2008, vol. 130 (4), 041004.
6. M. Xia, N. Sreenivasan, S. Lawson, and Y. Zhou: J. Eng. Mater Technol. (Trans. ASME), 2007, vol. 129, pp. 446-52.
7. S.K. Panda, N. Sreenivasan, M. Kuntz, and Y. Zhou: J. Eng. Mater. Technol. (Trans. ASME), 2008, vol. 130 (4), 041003.
8. S.K. Panda, D. Ravi Kumar, H. Kumar, and A.K. Nath: J. Mater. Process. Technol., 2007, vol. 183, pp. 321-32.
9. D. Dry, W. Wadell, and D.R.J. Owen: Sci. Technol. Weld. Join., 2002, vol. 7 (1), pp. 11-18.
10. G. Kridli, P.A. Friedman, and A.M. Sherman: SAE Technical Paper No. 2000-01-0772, SAE, Detroit, Michigan, March 6-9, 2000, pp. 1-9.
11. L.C. Chan, S.M. Chan, C.H. Cheng, and T.C. Lee: J. Eng. Mater. Technol., 2005, vol. 127, pp. 179-85.
12. Y. Choi, Y. Heo, H.Y. Kim, and D. Seo: J. Mater. Process Technol., 2000, vol. 108, pp. 1-7.
13. Y. Heo, Y. Choi, H. Kim, and D. Seo: J. Mater. Process. Technol., 2001, vol. 111, pp. 164-69.
14. S.K. Panda and D. Ravi Kumar: J. Mater. Process. Technol., 2008, vol. 204, pp. 70-79.
15. S. Gaied, J. Roelandt, F. Pinard, F. Schmit, and M. Balabane: J. Mater. Process. Technol., 2009, vol. 209, pp. 387-95.
16. H. Shao, J. Gould, and C. Albright: Metall. Mater. Trans. B, 2007, vol. 38B, pp. 321-31.
17. S.S. Hecker: Met. Eng. Q., 1974, pp. 30-36.
18. K. Narasimhan and V.M. Nadedkar: Trans. Ind. Inst. Met., 1996, vol. 49, pp. 659-76.
19. N. Yurioka, H. Suzuki, S. Ohshita, and S. Saito: Weld. J., 1980, vol. 62, pp. 147s-153s.
20. F.M. Al-Abbasi and J.A. Nemes: Int. J. Solid. Struct., 2003, vol. 40, pp. 3379-91.
21. D.V. Wilson: Metall. Technol., 1980, vol. 7, pp. 282-92.
22. S.K. Panda, M.L. Kuntz, and Y. Zhou: Sci. Technol. Weld. Join., 2009, vol. 14, pp. 52-61.
23. R.W. Davies, G.J. Grant, M.A. Khaleel, M.T. Smith, and H. Eddie Oliver: Metall. Mater. Trans. A, 2001, vol. 32A, pp. 275-83.
24. J.O. Hallquist: LS-DYNA Keyword User's Manual, Version 970, 2003, http:// www.lstc.com/ (Registered trademark of Livermore Software Technology Corporation, Livermore, CA).
25. W. Bleck, Z. Deng, K. Papamantellos, and C.O. Gusek: J. Mater. Process. Technol., 1998, vol. 83, pp. 223-30.
26. T. Belytschko, J.I. Lin, and C. Tsay: Comput. Methods Appl. Mech. Eng., 1984, vol. 42, pp. 225-51.
27. A.K. Ghosh: Int. J. Mech. Sci., 1977, vol. 19, pp. 457-70.
28. F. Barlat and J.I. Lian: Int. J. Plast., 1989, vol. 5, pp. 51-56.
29. M. Xia, E. Biro, Z. Tian, and Y. Zhou: ISIJ Int., 2008, vol. 48, pp. 809-14.
30. V.H. Baltazar Hernandez, M.L. Kuntz, M.I. Khan, and Y. Zhou: Sci. Technol. Weld. Join., 2008, vol. 13, pp. 769-76.
31. N. Sreenivasan, M. Kuntz, and Y Zhou: Int. Conf. Mater. Sci. Technol. (MS&T) Automotive, Detroit, MI, 2007, pp. 267-80.
32. S.K. Panda: Doctoral Thesis, Indian Institute of Technology, Delhi, India, 2007, chap. 6, pp. 112-61.