Enhanced 2-D modeling technique for single-sided patch repairs

AIAA Journal

Volumn 47, Issue 6, 2009, Pages 1558-1567

  Boscolo, Marco ^a,b   Allegri, Giuliano ^a,c   Zhang, Xiang ^a,b  

^a CRANFIELD UNIVERSITY   (United Kingdom)

^b Aerospace Engineering Department   (United Kingdom)

^c UNIVERSITY OF BRISTOL   (United Kingdom)

Author keywords

[No Author keywords available]

Indexed keywords

2-D MODEL; 3D MODELS; ALUMINUM PLATES; BENDING ANALYSIS; COMPUTER CODES; CRACK GROWTH LIFE; CRACK TIP STRESS; CURRENT MODELING; DESIGN TOOL; DIFFERENT SUBSTRATES; EXPERIMENTAL TEST; FATIGUE CRACK GROWTH; FATIGUE CRACK GROWTH RATES; FATIGUE LIFE; FINITE ELEMENT; METALLIC PLATE; MODELING TECHNIQUE; NASTRAN; PARAMETRIC STUDY; PATCH DIMENSIONS; PATCH REPAIR; PROGRESSIVE FAILURE; SECONDARY BENDING; SINGLE-SIDED REPAIR; THINNER SUBSTRATES; UNSYMMETRICAL;

ALUMINA; CRACKING (CHEMICAL); FATIGUE CRACK PROPAGATION; FATIGUE OF MATERIALS; REPAIR; THREE DIMENSIONAL;

CRACKS;

EID: 67650895672     PISSN: 00011452     EISSN: None     Source Type: Journal    
DOI: 10.2514/1.42184     Document Type: Conference Paper

References (27)

1. Baker, A. A., Rose, L. R. F., and Jones, R., Advanced in the Bonded Composite Repair of Metallic Aircraft Structure, Elsevier, New York, 2002.
2. Baker, A. A., "Fibre Composite Repair of Cracked Metallic Aircraft Components-Pratical and Basic Aspects," Composites, Vol.18, No.4, 1987, pp. 293-308. doi:10.1016/0010-4361(87)90293-X (Pubitemid 18519151)
3. Wang, C. H., Rose,L. R. F., andCallinan, R., "AnalysisofOut-of-Plane Bending in One-Sided Bonded Repair," International Journal of Solids and Structures, Vol.35, No.14, 1998, pp. 1653-1675. doi:10.1016/S0020-7683(97)00129- 7 (Pubitemid 128398072)
4. Rose, L. R. F., "A Cracked Plate Repaired by Bonded Reinforcements," International Journal of Fracture, Vol.18, No.2, 1982, pp. 135-144. doi:10.1007/BF00019638 (Pubitemid 12510534)
5. Young, M. J,. and Sun, C. T., "On the Strain Energy Release Rate for Cracked Plate Subjected to Out-of-Plane Bending Moment," International Journal of Fracture, Vol.60, No.3, 1993, pp. 227-247. doi:10.1007/BF00012511
6. Arendt, C, and Sun, C. T., "Bending Effects of Unsymmetric Adhesively Bonded Composite Repairs on Cracked Aluminum Panels," Proceedings of the FAA/NASSA Symposium on Advanced Integrity Methods for Airframe Durability and Damage Tolerance, Pt. 1, 1994, pp. 33-48.
7. Rybicki, E., and Kanninen, M., "A Finite Element Calculation of Stress Intensity Factors by a Modified Crack Closure Integral," Engineering Fracture Mechanics, Vol.9, No.4, 1977, pp. 931-938. doi: 10.1016/0013-7944(77) 90013-3 (Pubitemid 9388160)
8. Raju, L, "Calculation of Strain Energy Release Rate with Higher Order and Singular Finite Elements," Engineering Fracture Mechanics, Vol.28, No.3, 1987, pp. 251-274. doi: 10.1016/0013-7944(87)90220-7 (Pubitemid 18530868)
9. Krueger, R., "The Virtual Crack Closure Technique: History, Approach and Applications," ICASE, ICASE Mail Stop 132C, NASA Langley Research Center, Rept. No.2002-10 NASA/CR-2002-211628, 2002.
10. Sun, C. T., Klug, J., and Arendt, C, "Analysis of Cracked Aluminium Plates Repaired with Bonded Composite Patches," AIAA Journal, Vol.34, No.2, 1996, pp. 369-374. doi:10.2514/3.13073 (Pubitemid 126510974)
11. Wang, C. H., and Rose, L. R. F., "A Crack Bridging Model for Bonded Plates Subjected to Tension and Bending," International Journal of Solids and Structures, Vol.36, No.13, 1999, pp. 1985-2014. doi:10.1016/S0020-7683(98) 00070-5
12. Klug, J., Maley, S., and Sun, C. T., "Characterization of Fatigue Behavior of Bonded Composite Repairs," Journal of Aircraft, Vol.36, No.6, 1999, pp. 1016-1022. doi: 10.2514/2.2543 (Pubitemid 30546410)
13. Lee, W.-Y., and Lee, J.-J., "Fatigue Behavior of Composite Patch Repaired Aluminum Plate," Journal of Composite Materials, Vol.39, No.16, 2005, pp. 1449-1463. doi:10.1177/0021998305050435 (Pubitemid 41229552)
14. Lee, W.-Y., and Lee, J.-J., "Successive 3D FE Analysis Technique for Characterization of Fatigue Crack Growth Behavior in CompositeRepaired Aluminum Plate," Composite Structures, Vol.66, Nos. 1-4, 2004, pp. 513-520. doi:10.1016/j.compstruct.2004.04.074 (Pubitemid 39102997)
15. Hosseini-Toudeshky, H., and Mohammadi, B., "A Simple Method to Calculate the Crack Growth Life of Adhesively Repaired Aluminum Panels," Composite Structures, Vol.79, No.2, 2007, pp. 234-241. doi:10.1016/j.compstruct. 2006.01.005 (Pubitemid 46351842)
16. Hosseini-Toudeshky, H., Mohammadi, B., Sadeghi, G., and Daghyani, H. R., "Numerical and Experimental Fatigue Crack Growth Analysis in Mode-I for Repaired Aluminum Panels Using Composite Material," Composites Part A: Applied Science and Manufacturing, Vol.38, No.4, 2007, pp. 1141-1148. doi:10.1016/j.compositesa.2006.06.003 (Pubitemid 46097473)
17. Boscolo, M., Allegri, G., and Zhang, X., "Design and Modelling of Selective Reinforcements for Integral Aircraft Structures," AIAA Journal, Vol.46, No.9, 2008, pp. 2323-2331. doi: 10.2514/1.35712
18. Zhang, X., Figueroa-Gordon, D., Boscolo, M., Allegri, G., and Irving, P. E., "Improving Fail-Safety of Aircraft Integral Structures Throughthe Use of Bonded Crack Retarders," Proceedings of the 24th Symposium of International Committee on Aeronautical Fatigue, ICAF 2007, PACINIeditore, May 2007.
19. Zhang, X., Boscolo, M., Figueroa-Gordon, D., Allegri, G., and Irving, P. E., "Fail-Safe Design of Integral Metallic Aircraft Structures Reinforced by Bonded Crack Retarders," Engineering Fracture Mechanics, Vol.76, No.1, 2009, pp. 114-133. doi:10.1016/j.engfracmech.2008.02.003
20. Tahmasebi, F., "Software Tools for Analysis of Bonded Joints," NASA/GSFC, TR 542, 2001.
21. Mindlin, R., "Influence of Rotatory Inertia and Shear on Flexural Motions of Isotropic Elastic Plates," Transactions of the American Society of Mechanical Engineers, Journal of Applied Mechanics, Vol.18, 1951, pp. 31-38.
22. Wang, C. H., and Rose, L. R. F., "On the Design of Bonded Patches for One-Sided Repair," Proceedings of the 11th International Conference on Composite Materials, July 1997, pp. 347-356.
23. Camanho, P. P., and Dávila, C, "Mixed-Mode Decohesion Finite Elements for the Simulation of Delamination in Composite Materials," NASA TR TM-2002-211737, June 2002.
24. Kutlu, Z., and Chang, F., "Modeling Compression Failure of Laminated Composites Contain Multiple Through-the-Width Delaminations," Composite Materials, Vol.26, No.3, 1992, pp. 350-387. doi:10.1177/002199839202600303
25. Forman, R., and Mettu, S., "Behavior of Surface and Corner Cracks Subjected to Tensile and Bending Loads in TÍ-6A1-4V Alloy," Fracture Mechanics 22nd Symposium, ASTM STP 1131, ASTM, Philadelphia, PA, 1992.
26. Lin, X. B., and Smith, R. A., "Finite Element Modelling of Fatigue Crack Growth of Surface Cracked Plates. Part 1: The Numerical Technique," Engineering Fracture Mechanics, Vol.63, No.5, 1999, pp. 503-522. doi:10.1016/S0013-7944(99)00040-5 (Pubitemid 29473565)
27. Harter, J., AFGROW Users Guide and Technical Manual, Air Vehicles Directorate, afřl-va-wp-tr-2006-xxxx ed., June 2006.