Influence of the fibre/matrix interface on ageing mechanisms of glass fibre reinforced thermoplastic composites (PA-6,6, PET, PBT) in a hygrothermal environment

Polymer Degradation and Stability

Volumn 94, Issue 9, 2009, Pages 1315-1324

  Bergeret, A ^a   Ferry, L ^a   Ienny, P ^a  

^a ECOLE DES MINES D ALÈS   (France)

Author keywords

Ageing; Interface; PA 6,6; PBT; PET; Thermoplastic composites

Indexed keywords

AGEING; INTERFACE; PA-6,6; PBT; PET; THERMOPLASTIC COMPOSITES;

BIOACCUMULATION; BUTENES; ETHYLENE; GLASS FIBERS; HYDROPHILICITY; POLYETHYLENE TEREPHTHALATES; SURFACE TREATMENT; THERMOPLASTICS;

REINFORCED PLASTICS;

EID: 67650248293     PISSN: 01413910     EISSN: None     Source Type: Journal    
DOI: 10.1016/j.polymdegradstab.2009.04.009     Document Type: Review

References (36)

1. Gautier L., Mortaigne B., and Cellenger V. Interface damage study of hydrothermally aged polyester matrix. Polymer 41 (2000) 2481-2490
2. Pauchard V., Grosjean F., Campion-Boulharts H., and Chateauminois A. Application of stress corrosion cracking model to an analysis of the durability of glass/epoxy composites in wet environments. Compos Sci Technol 62 (2002) 493-498
3. ® polyimide. J Appl Polym Sci 31 6 (1986) 1619-1629
4. Han M.H., and Nairn J.A. Hygrothermal aging of polyimide matrix composite laminates. Compos Part A Appl S 34 10 (2003) 979-986
5. Chen Chi M.M., Chang Lun L., Min Jong C., and Nyan Hwa T. Effect of physical aging on the toughness of carbon fiber reinforced poly(ether ether ketone) and poly(phenylene sulphide) composites. Polym Compos 13 6 (1992) 441-447
6. Mohd Ishak Z.A., Ishiaku U.S., and Karger Kocsis J. Microstructure related fracture behaviour of injection moulded short fibre reinforced polyarylamide in dry and wet state. J Mater Sci 33 13 (1998) 3377-3389
7. Mohd Ishak Z.A., and Berry J.P. Hygrothermal aging studies of short carbon fiber reinforced nylon 6.6. J Appl Polym Sci 51 13 (1994) 2145-2155
8. Akay M. Moisture absorption and its influence on the tensile properties of glass-fibre reinforced polyamide 6.6. Polym Polym Compos 2 6 (1994) 349-354
9. Mohd Ishak Z.A., and Lim N.C. Effect of moisture on the tensile properties of short glass fiber reinforced poly(butylene terephthalate). Polym Eng Sci 34 22 (1994) 1645-1655
10. Czigany T., Mohd Isak Z.A., and Karger Kocsis J. Effect of hygrothermal aging on the fracture and failure behaviour in short glass reinforced, thoughned poly(butylene terephthalate) composites. Polym Compos 17 6 (1996) 900-909
11. Mohd Ishak ZA, Ariffin A, Senawi R. Effects of hygrothermal aging and a silane coupling agent on the tensile properties of injection molded short glass fiber reinforced poly(butylene terephthalate) composites.
12. Barany T., Karger Kocsis J., and Czigany. Effect of hygrothermal aging on the essential work of fracture response of amorphous poly(ethylene terephthalate) sheets. Polym Degrad Stab 82 2 (2003) 271-278
13. Mac Mahon W., Birsdall H.A., Johnson G.R., and Camilli C.T. Degradation studies of polyethylene terephthalate. J Chem Eng Data 4 1 (1959) 57-79
14. Ravens D.A.S., and Ward I.M. Chemical reactivity of polyethylene terephthalate. Trans Far Soc 57 (1961) 150-159
15. Golike R.C., and Lasoski Jr. S.W. Kinetics of hydrolysis of polyethylene terephthalate films. J Phys Chem 64 (1960) 895-898
16. Ballara A., and Verdu J. Physical aspects of the hydrolysis of polyethylene terephthalate. Polym Degrad Stab 26 (1989) 361-374
17. Launay A., Thominette F., and Verdu J. Hydrolysis of poly(ethylene terephthalate): a kinetic study. Polym Degrad Stab 46 (1994) 319-324
18. Salmon L., Thominette F., Pays M.F., and Verdu J. Hydrolytic aging of polysiloxane networks modeling the glass fiber epoxy-amine interphase. Polym Compos 20 6 (1999) 715-724
19. Salmon L., Thominette F., Pays M.F., and Verdu J. Hydrolytic degradation of model networks simulating the interfacial layer silane coupled epoxy/glass composites. J Compos Sci Technol 57 8 (1997) 1119-1127
20. Zinck P., and Gerard J.F. Are microcomposites realistic models of the fibre/matrix interface? Physico-chemical approach. Polymer 42 15 (2001) 6641-6650
21. Gaur U., and Miller B. Effects of environmental exposure on fiber epoxy interfacial shear strength. Polym Compos 11 4 (1990) 217-222
22. Biro D.A., Pleizer G., and Deslandes Y. Application of the microbond technique: effects of hygrothermal exposure on carbon fiber/epoxy interfaces. Compos Sci Technol 46 3 (1993) 293-301
23. McDonough W.G., Antonucci J.M., Jianmei H., Shimada Y., Chiang M.Y.M., and Schumacher G.E. A microshear test to measure bond strengths of dentin-polymer interfaces. Biomaterials 23 17 (2002) 3603-3608
24. Schutte C.L., McDonough W.G., Shioya M., McAuliffe M., and Greenwood M. The use of a single fibre fragmentation test to study environmental durability of interfaces/interphases between DGEBA/MPDA epoxy and glass fibre: the effect of moisture. Composites 25 7 (1994) 617-624
25. Pawson D., and Jones F.R. The effect of sodium ions on the stability of the interpahse region of glass fibre reinforced composites. J Adhesion 52 1-4 (1995) 187-207
26. Wagner H.D., and Lustiger A. Effect of water on the mechanical adhesion of the glass/epoxy interface. Composites 25 7 (1994) 613-616
27. Hodzic A., Kim J.K., Lowe A.E., and Stachurski Z.H. Nano-indentation and nano-scratch of polymer/glass interfaces. II: model of interphases in water aged composite materials. Compos Sci Technol 42 13 (2001) 5701-5710
28. Thomason J.L. The interface region in glass fibre reinforced epoxy resin composites. III. Characterization of fibre coatings and the interphase. Titre. Composites 26 7 (1995) 487-498
29. Bergeret A., Bozec M.P., Quantin J.C., Crespy A., Gasca J.P., and Arpin M. Study of interphase in glass fiber reinforced poly(butylene terephthalate) composites. Polymer Composites 25 1 (2004) 12-25
30. Giton M., Ienny P., and Piques R. Viscous hyper-elastic behaviour characterisation of a silicone-rubber: inverse problem resolution based on measurements by digital image correlation (2003), Comptest, Châlons-en-Champagne (France)
31. Laraba Abbes F., Ienny P., and Piques R. A new tailor-made methodology for the mechanical behaviour analysis in rubber like materials: I. Kinematics measurements using a digital speckle extensometry. Polymer 44 (2003) 807-820
32. Foulc M.P., Bergeret A., Ferry L., Ienny P., and Crespy A. Study of hygrothermal ageing of glass fibre reinforced PET composites. Polym Degrad Stab 89 (2005) 461-470
33. Pohl H.A. Determination of carboxyl end groups in a polyester, polyethylene terephthalate. Anal Anal 26 10 (1954) 1614-1616
34. Carter H.G., and Kibler K.G. Langmuir type model for anomalous moisture diffusion in composite resins. J Compos Mater 12 (1978) 118-131
35. Adamczak L. Etude du vieillissement hygrothermique de trois thermoplastiques à l'état massique et renforcés de fibres de verre continues. PhD thesis 1995. Ecole des Mines de Paris (France).
36. Murthy N.S., and Akkapedi M.K. Analysis of lamellar structure in semicrystalline polymers by studying the absorption of water and ethylene glycol in nylons using small angle neutron scattering. Macromolecules 31 (1998) 142-152