Valorisation of wastewater from two-phase olive oil extraction in fired clay brick production

Journal of Hazardous Materials

Volumn 169, Issue 1-3, 2009, Pages 271-278

  de la Casa, José A ^a   Lorite, Miguel ^b   Jiménez, Juan ^b   Castro, Eulogio ^b  

^a Cerámica Malpesa S A   (Spain)

^b UNIVERSITY OF JAÉN   (Spain)

Author keywords

Ceramic building materials; Olive mill wastewater; Physical properties; Two phase olive oil extraction

Indexed keywords

CERAMIC BODIES; CERAMIC BUILDING MATERIALS; CLAY BRICKS; CLAY MIXTURES; ECONOMIC SAVINGS; END-PRODUCT; FACING BRICKS; FIRED CLAY BRICKS; FRESH WATER; INDUSTRIAL SCALE; MANUFACTURING INDUSTRIES; OLIVE MILL WASTEWATER; OLIVE OIL; OLIVE OIL WASTEWATER; TECHNOLOGICAL PROPERTIES; TWO-PHASE OLIVE OIL EXTRACTION; VALORISATION;

BENDING STRENGTH; BIOCHEMICAL OXYGEN DEMAND; BRICK; BUILDING MATERIALS; CERAMIC MATERIALS; CLAY MINERALS; CONSTRUCTION EQUIPMENT; ENVIRONMENTAL IMPACT; EXTRUSION; PHYSICAL PROPERTIES; VEGETABLE OILS; WASTEWATER;

BRICKMAKING;

FRESH WATER; OLIVE OIL;

CERAMICS; COMPARATIVE STUDY; EXTRACTION METHOD; MANUFACTURING; OIL; PERFORMANCE ASSESSMENT; PHYSICAL PROPERTY; WASTEWATER;

ARTICLE; BUILDING MATERIAL; CERAMIC INDUSTRY; CLAY; CONTROLLED STUDY; COST CONTROL; ECONOMIC ASPECT; ENVIRONMENTAL IMPACT; EXTRACTION; HEATING; WASTE WATER MANAGEMENT;

ALUMINUM SILICATES; CONSTRUCTION MATERIALS; INDUSTRIAL WASTE; PLANT OILS; WASTE DISPOSAL, FLUID; WATER POLLUTANTS;

EID: 67649983072     PISSN: 03043894     EISSN: None     Source Type: Journal    
DOI: 10.1016/j.jhazmat.2009.03.095     Document Type: Article

References (34)

1. Roig A., Cayuela M.L., and Sánchez-Monedero M.A. An overview on olive mill wastes and their valorisation methods. Waste Manag. 26 (2006) 960-969
2. Azbar N., Bayram A., Filibeli A., Muezzinoglu A., Sengul F., and Ozer A. A review of wastes management options in olive oil production. Crit. Rev. Environ. Sci. Technol. 34 (2004) 209-247
3. Rincón B., Sánchez E., Raposo F., Borja R., Travieso L., Martín M.A., and Martín A. Effect of the organic loading rate on the performance of anaerobic acidogenic fermentation of two-phase olive mill solid residue. Waste Manag. 28 (2008) 870-877
4. Borja R., Martín A., Sánchez E., Rincón B., and Raposo F. Kinetic modelling of the hydrolysis, acidogenic and methanogenic steps in the anaerobic digestion of two-phase olive pomace (TPOP). Process Biochem. 40 (2005) 1841-1847
5. Fernández-Bolaños J., Rodríguez G., Rodríguez R., Heredia A., Guillén R., and Jiménez A. Production in large quantities of highly purified hydroxytyrosol from liquid-solid waste of two-phase olive oil processing or "Alperujo". J. Agric. Food Chem. 50 (2002) 6804-6811
6. Fernández-Bolaños J., Rodríguez G., Gómez E., Guillen R., Jimenez A., Heredia A., and Rodríguez R. Total recovery of the waste of two-phase olive oil processing: isolation of added-value compounds. J. Agric. Food Chem. 52 (2004) 5849-5855
7. Rodríguez G., Rodríguez R., Jiménez A., Guillén R., and Fernández-Bolaños J. Effect of steam treatment of alperujo on the composition, enzymatic saccharification, and in vitro digestibility of alperujo. J. Food Agric. Chem. 55 (2007) 136-142
8. Khoufi S., Feki F., and Sayadi S. Detoxification of olive mill wastewater by electrocoagulation and sedimentation processes. J. Hazard. Mat. 142 (2007) 58-67
9. Gotsia M., Kalogerakisa N., Psillakisa E., Samarasb P., and Mantzavinos D. Electrochemical oxidation of olive oil mill wastewaters. Water Res. 39 (2005) 4177-4187
10. El-Gohary F.A., Badawy M.I., El-Khateeb M.A., and El-Kalliny A.S. Integrated treatment of olive mill wastewater (OMW) by the combination of Fenton's reaction and anaerobic treatment. J. Hazard. Mater. 162 (2008) 1536-1541
11. Paredes C., Cegarra J., Roig A., Sánchez-Monedero M.A., and Bernal M.P. Characterization of olive mill wastewater (alpechin) and its sludge for agricultural purposes. Biores. Technol. 67 (1999) 111-115
12. Ministerio de Medio Ambiente, Anuario de Estadística Agroalimentaria y Pesquera, 2007 http://www.mapa.es/estadistica/pags/anuario/2007/pdf/PDF17_10.pdf.
13. Borja R., Raposo F., and Rincón B. Treatment technologies of liquid and solid wastes from two-phase olive oil mills. Grasas y Aceites 57 (2006) 32-46
14. Mekki H., Anderson M., Amar E., Skerratt G.R., and BenZina M. Olive oil mill waste water as a replacement for fresh water in the manufacture of fired clay bricks. J. Chem. Technol. Biotechnol. 81 (2006) 1419-1425
15. Mekki H., Anderson M., BenZina M., and Ammar E. Valorization of olive mill wastewater by its incorporation in building bricks. J. Hazard. Mat. 158 (2008) 308-315
16. González I., Galán E., Miras A., and Aparicio P. New uses for brick-making clay materials from the Bailén area (southern Spain). Clay Minerals 33 (1998) 453-465
17. Jiménez Millán J., Molina J.M., and Ruiz-Ortiz P.A. Mineralogical and sedimentological characterization of clay raw materials and firing transformations in the brick-making industry from the Bailén area (southern Spain). In: Ortega M., López Galindo A., and Palomo I. (Eds). Advances in Clay Minerals (1998), Universidad de Granada, Granada 230-232
18. Monteiro S.N., and Vieira C.M.F. Effect of oily waste addition to clay ceramic. Ceramics Int. 31 (2005) 353-358
19. Lin D.F., and Weng C.H. Use of sewage sludge ash as brick material. J. Environ. Eng. 127 (2001) 922-927
20. Vieira C.M.F., Soares T.M., Sánchez R., and Monteiro S.N. Incorporation of granite waste in red ceramics. Mat. Sci. Eng. A 373 (2004) 115-121
21. Sheng C., and Azevedo J.L.T. Estimating the higher heating value of biomass fuels from basic analysis data. Biomass Bioenergy 28 (2005) 499-507
22. Fernández M. Manual sobre fabricación de baldosas, tejas y ladrillos (2000), Beralamar, S.A., Terrassa p. 145
23. Dinelli E., and Tateo T. Sheet silicates as effective carries of heavy metals in the ophiolitic mine area of Vigonzano (northern Italy). Mineralogical Magazine 65 (2001) 121-132
24. Dondi M., Fabbri B., and Laviano R. Characteristics of the clays utilized in the bricks industry in Apulia and Basilicata (southren Italy). Miner. Petrogr. Acta 35A (1992) 179-189
25. Fabbri B., and Dondi M. La produzione del laterizio in Italia (1995), Faenza Editrice, Roma p. 160
26. Fabbri B., and Fiori C. Clays and complementary raw materials for stoneware tiles. Mineral. Petrol. Acta 29 (1985) 535-545
27. Tar G., Ferreira J.M.F., and Fonseca A.T. Influence of particle size and particle size distribution on drying-shrinkage behaviour of alumina slip cast bodies. Ceramics Int. 25 (1999) 577-580
28. Beltrán V., Ferrando E., García J., and Sánchez E. Extruded rustic floor tiles. I. Impact of the composition on the body's behaviour in the prefiring process stages. Tile & Brick Int. 11 (1995) 169-176
29. Krause E. Principes fondamentaux du séchage. Le séchage en céramique. Principes et techniques (1977), Septima, Paris pp. 132-137
30. Avgustinik A.I. Secado y secaderos. Cerámica (1983), Reverté, Madrid pp. 222-236
31. Bohlmann C. Additives for the optimization of the processing and product properties. Part 2: Auxiliaries for heavy clay bodies. Ziegel Industrie Int. 7 (1999) 61-66
32. Rimpel E., and Rehme F. Additives to reduce the extrusion moisture and the power consumption in the shaping process. Ziegel Int. Annu. (2004) 41-52
33. O. Rentz, A. Schmittinger, R. Jochum, F. Schultmann, Exemplary investigation into the state of practical realisation of integrated environmental protection within the ceramics industry under observance of the IPPC-directive and the development of BAT reference documents, Research project 298 94 313/07, Environmental Research Plan of the Federal Minister for the Environment, Nature Conservation and Safety, French-German Institute for Environmental Research University of Karlsruhe (2001) 44-52.
34. Kretz R. Symbols for rock-forming minerals. Am. Mineralogist 68 (1983) 277-279